2 # please put your help in in alphabetical order
4 # a string search is done in the command field (case is ignored)
5 # and all commands matching the asked for command are printed out
7 # the order of the fields in each header is
8 # privilege, command, Description
9 # if the command ends in a - then that line isn't printed, but any
10 # subsequent lines are
12 # Comment lines are indented before printing
14 === 0^ANNOUNCE <text>^Send an announcement to LOCAL users only
15 <text> is the text of the announcement you wish to broadcast
17 === 0^ANNOUNCE FULL <text>^Send an announcement cluster wide
18 This will send your announcement cluster wide
20 === 5^ANNOUNCE SYSOP <text>^Send an announcement to Sysops only
22 === 0^APROPOS <string>^Search help database for <string>
23 Search the help database for <string> (it isn't case sensitive), and print
24 the names of all the commands that may be relevant.
26 === 0^BYE^Exit from the cluster
27 This will disconnect you from the cluster
29 === 5^CONNECT <callsign>^Start a connection to another DX Cluster
30 Start a connection process that will culminate in a new connection to the
31 DX cluster <callsign>. This process creates a new 'client' process which will
32 use the script in /spider/connect/<callsign> to effect the 'chat' exchange
33 necessary to traverse the network(s) to logon to the cluster <callsign>.
35 === 9^CATCHUP <node call> All|[<msgno> ...]^Mark a message as sent
36 === 9^UNCATCHUP <node call> All|[msgno> ...]^Unmark a message as sent
37 When you send messages the fact that you have forwarded it to another node
38 is remembered so that it isn't sent again. When you have a new partner
39 node and you add their callsign to your /spider/msg/forward.pl file, all
40 outstanding non-private messages will be forwarded to them. This may well
41 be ALL the non-private messages. You can prevent this by using these
45 catchup GB7DJK 300 301 302 303 500-510
47 and to undo what you have just done:-
50 uncatchup GB7DJK 300 301 302 303 500-510
52 which will arrange for them to be forward candidates again.
54 Order is not important.
56 === 0^DBAVAIL^Show a list of all the Databases in the system
57 Title says it all really, this command lists all the databases defined
58 in the system. It is also aliased to SHOW/COMMAND.
60 === 9^DBCREATE <name>^Create a database entry
61 === 9^DBCREATE <name> chain <name> [<name>..]^Create a chained database entry
62 === 9^DBCREATE <name> remote <node>^Create a remote database entry
63 DBCREATE allows you to define a database in the system. It doesn't actually
64 create anything, just defines it.
66 The databases that are created are simple DB_File hash databases, they are
67 therefore already 'indexed'.
69 You can define a local database with the first form of the command eg:
73 You can also chain databases with the addition of the 'chain' keyword.
74 This will search each database one after the other. A typical example
77 DBCREATE sdx_qsl chain sql_ad
79 No checking is done to see if the any of the chained databases exist, in
80 fact it is usually better to do the above staement first then do each of
81 the chained databases.
83 Databases can exist offsite. To define a database that lives on another
86 DBCREATE buckmaster remote gb7dxc
88 Remote databases cannot be chained; however, the last database in a
89 a chain can be a remote database eg:
91 DBCREATE qsl chain gb7dxc
93 To see what databases have been defined do:
95 DBAVAIL (or it will have been aliased to SHOW/COMMAND)
97 It would be normal for you to add an entry into your local Aliases file
98 to allow people to use the 'SHOW/<dbname>' style syntax. So you would
99 need to add a line like:-
104 '^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
113 to work as they may be used to.
115 See DBIMPORT for the importing of existing AK1A format data to databases.
116 See DBSHOW for generic database enquiry
118 === 9^DBIMPORT <dbname> <filename>^Import AK1A data into a database
119 If you want to import or update data in bulk to a database you can use
120 this command. It will either create or update entries into an existing
121 database. For example:-
123 DBIMPORT oblast /tmp/OBLAST.FUL
125 will import the standard OBLAST database that comes with AK1A into the
126 oblast database held locally.
128 === 9^DBREMOVE <dbname>^Delete a database
129 DBREMOVE will completely remove a database entry and also delete any data
130 file that is associated with it.
132 There is no warning, no comeback, no safety net.
138 will remove the oblast database from the system and it will also remove
139 the associated datafile.
143 There is no warning, no comeback, no safety net.
145 You have been warned.
147 === 0^DBSHOW <dbname> <key>^Display an entry, if it exists, in a database
148 This is the generic user interface to the database to the database system.
149 It is expected that the sysop will add an entry to the local Aliases file
150 so that users can use the more familiar AK1A style of enquiry such as:
154 but if he hasn't and the database really does exist (use DBAVAIL or
155 SHOW/COMMAND to find out) you can do the same thing with:
159 === 9^DEBUG^Set the cluster program into debug mode
160 Executing this command will only have an effect if you are running the cluster
165 It will interrupt the cluster just after the debug command has finished.
166 === 0^DIRECTORY^List messages
167 === 0^DIRECTORY ALL^List all messages
168 === 0^DIRECTORY OWN^List your own messages
169 === 0^DIRECTORY NEW^List all new messages
170 === 0^DIRECTORY TO <call>^List all messages to <call>
171 === 0^DIRECTORY FROM <call>^List all messages from <call>
172 === 0^DIRECTORY SUBJECT <string>^List all messages with <string> in subject
173 === 0^DIRECTORY <nn>^List last <nn> messages
174 === 0^DIRECTORY <from>-<to>^List messages <from> message <to> message
175 List the messages in the messages directory.
177 If there is a 'p' one space after the message number then it is a
178 personal message. If there is a '-' between the message number and the
179 'p' then this indicates that the message has been read.
181 You can use shell escape characters such as '*' and '?' in the <call>
184 You can combine some of the various directory commands together eg:-
188 DIR SUBJECT IOTA 200-250
190 You can abbreviate all the commands to one letter and use ak1a syntax:-
196 Sysops can see all users' messages.
198 === 8^DISCONNECT <call> [<call> ...]^Disconnect a user or cluster
199 Disconnect any <call> connected locally
201 === 0^DX [BY <call>] <freq> <call> <remarks>^Send a DX spot
202 This is how you send a DX Spot to other users. You can, in fact, now
203 enter the <freq> and the <call> either way round.
209 will all give the same result. You can add some remarks to the end
210 of the command and they will be added to the spot.
212 DX FR0G 144600 this is a test
214 You can credit someone else by saying:-
216 DX by G1TLH FR0G 144.600 he isn't on the cluster
218 The <freq> is compared against the available bands set up in the
219 cluster. See SHOW/BANDS for more information.
221 === 9^EXPORT <msgno> <filename>^Export a message to a file
222 Export a message to a file. This command can only be executed on a local
223 console with a fully privileged user. The file produced will be in a form
224 ready to be imported back into the cluster by placing it in the import
225 directory (/spider/msg/import).
227 This command cannot overwrite an existing file. This is to provide some
228 measure of security. Any files written will owned by the same user as the
229 main cluster, otherwise you can put the new files anywhere the cluster can
230 access. For example:-
234 === 9^EXPORT_USERS [<filename>]^Export the users database to ascii
235 Export the users database to a file in ascii format. If no filename
236 is given then it will export the file to /spider/data/user_asc.
238 If the file already exists it will be renamed to <filename>.o. In fact
239 up to 5 generations of the file can be kept each one with an extra 'o' on the
242 BE WARNED: this will write to any file you have write access to. No check is
243 made on the filename (if any) that you specify.
245 === 1^FORWARD/OPERNAME <call>^Send out information on this <call> to all clusters
246 This command sends out any information held in the user file which can
247 be broadcast in PC41 protocol packets. This information is Name, QTH, Location
248 and Homenode. PC41s are only sent for the information that is available.
250 === 0^HELP^The HELP Command
251 HELP is available for a number of commands. The syntax is:-
255 Where <cmd> is the name of the command you want help on.
257 All commands can be abbreviated, so SHOW/DX can be abbreviated
258 to SH/DX, ANNOUNCE can be shortened to AN and so on.
260 Look at the APROPOS <string> command which will search the help database
261 for the <string> you specify and give you a list of likely commands
262 to look at with HELP.
264 === 5^INIT <node>^Re-initialise a link to an AK1A compatible node
265 This command attempts to re-initialise a link to a (usually) AK1A node
266 that has got confused, usually by a protocol loop of some kind. It may
267 work - but you usually will be better off simply disconnecting it (or
268 better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
271 Best of luck - you will need it.
273 === 0^KILL <msgno> [<msgno..]^Delete a message from the local system
274 Delete a message from the local system. You will only be able to
275 delete messages that you have originated or been sent (unless you are
278 === 5^KILL FULL <msgno> [<msgno..]^Delete a message from the whole cluster
279 Delete a message (usually a 'bulletin') from the whole cluster system.
281 This uses the subject field, so any messages that have exactly the
282 same subject will be deleted. Beware!
284 === 0^LINKS^Show which nodes is physically connected
285 This is a quick listing that shows which links are connected and
286 some information about them. See WHO for a list of all connections.
288 === 9^LOAD/ALIASES^Reload the command alias table
289 Reload the /spider/cmd/Aliases file after you have editted it. You
290 will need to do this if you change this file whilst the cluster is
291 running in order for the changes to take effect.
293 === 9^LOAD/BANDS^Reload the band limits table
294 Reload the /spider/data/bands.pl file if you have changed it manually whilst
295 the cluster is running.
297 === 9^LOAD/BADDX^Reload the bad DX table
298 Reload the /spider/data/baddx.pl file if you have changed it manually whilst
299 the cluster is running. This table contains the DX Calls that, if spotted,
300 will not be passed on. FR0G and TEST are classic examples.
302 === 9^LOAD/BADMSG^Reload the bad msg table
303 Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst
304 the cluster is running. This table contains a number of perl regular
305 expressions which are searched for in the fields targetted of each message.
306 If any of them match then that message is immediately deleted on receipt.
308 === 9^LOAD/BADWORDS^Reload the bad words table
309 Reload the /spider/data/badwords file if you have changed it manually whilst
310 the cluster is running. This file contains a list of words which, if found
311 on certain text portions of PC protocol, will cause those protocol frames
312 to be rejected. It will all put out a message if any of these words are
313 used on the announce, dx and talk commands. The words can be one or
314 more on a line, lines starting with '#' are ignored.
316 === 9^LOAD/CMD_CACHE^Reload the automatic command cache
317 Normally, if you change a command file in the cmd or local_cmd tree it
318 will automatially be picked up by the cluster program. Sometimes it
319 can get confused if you are doing a lot of moving commands about or
320 delete a command in the local_cmd tree and want to use the normal one
321 again. Execute this command to reset everything back to the state it
322 was just after a cluster restart.
324 === 9^LOAD/FORWARD^Reload the msg forwarding routing table
325 Reload the /spider/msg/forward.pl file if you have changed it
326 manually whilst the cluster is running.
328 === 9^LOAD/MESSAGES^Reload the system messages file
329 If you change the /spider/perl/Messages file (usually whilst
330 fiddling/writing new commands) you can have them take effect during a
331 cluster session by executing this command. You need to do this if get
334 unknown message 'xxxx' in lang 'en'
336 === 9^LOAD/PREFIXES^Reload the prefix table
337 Reload the /spider/data/prefix_data.pl file if you have changed it
338 manually whilst the cluster is running.
340 === 5^MERGE <node> [<no spots>/<no wwv>]^Ask for the latest spots and WWV
341 MERGE allows you to bring your spot and wwv database up to date. By default
342 it will request the last 10 spots and 5 WWVs from the node you select. The
343 node must be connected locally.
345 You can request any number of spots or wwv and although they will be appended
346 to your databases they will not duplicate any that have recently been added
347 (the last 2 days for spots and last month for WWV data).
349 === 9^MSG <cmd> <msgno> [data ... ]^Alter various message parameters
350 Alter message parameters like To, From, Subject, whether private or bulletin
351 or return receipt (RR) is required or whether to keep this message from timing
354 MSG TO <msgno> <call> - change TO callsign to <call>
355 MSG FRom <msgno> <call> - change FROM callsign to <call>
356 MSG PRrivate <msgno> - set private flag
357 MSG NOPRrivate <msgno> - unset private flag
358 MSG RR <msgno> - set RR flag
359 MSG NORR <msgno> - unset RR flag
360 MSG KEep <msgno> - set the keep flag (message won't be deleted ever)
361 MSG NOKEep <msgno> - unset the keep flag
362 MSG SUbject <msgno> <new> - change the subject to <new>
363 MSG WAittime <msgno> - remove any waitting time for this message
364 MSG NOREad <msgno> - mark message as unread
365 MSG REad <msgno> - mark message as read
366 MSG QUeue - queue any outstanding bulletins
367 MSG QUeue 1 - queue any outstanding private messages
369 You can look at the status of a message by using:-
373 This will display more information on the message than DIR does.
375 === 8^PC <call> <text>^Send text (eg PC Protocol) to <call>
376 Send some arbitrary text to a locally connected callsign. No
377 processing is done on the text. This command allows you to send PC
378 Protocol to unstick things if problems arise (messages get stuck
381 pc gb7djk PC33^GB7TLH^GB7DJK^400^
383 pc G1TLH Try doing that properly!!!
385 === 1^PING <node>^Send a ping command to another cluster
386 This command is used to estimate the quality of the link to another cluster.
387 The time returned is the length of time taken for a PC51 to go to another
388 cluster and be returned.
390 === 0^KILL <msgno> [<msgno> ...]^Remove or erase a message from the system
391 You can get rid of any message to or originating from your callsign using
392 this command. You can remove more than one message at a time.
394 === 5^KILL <from>-<to>^Remove a range of messages from the system
395 === 5^KILL FROM <call>^Remove all messages from a callsign
396 === 5^KILL TO <call>^Remove all messages to a callsign
397 === 5^KILL FULL <msgno> [<msgno]^Remove a message from the entire cluster
398 Remove this message from the entire cluster system as well as your node.
401 As a sysop you can kill any message on the system.
403 === 8^PC <call> <text>^Send arbitrary text to a connected callsign
404 Send any text you like to the callsign requested. This is used mainly to send
405 PC protocol to connected nodes either for testing or to unstick things.
407 You can also use in the same way as a talk command to a connected user but
408 without any processing, added of "from <blah> to <blah" or whatever.
410 === 1^PING <node call>^Find out the delays an a circuit to another node
411 This command will enable sysops to determine the speed of an inter-cluster
414 Any visible cluster node can be PINGed.
416 === 1^RCMD <node call> <cmd>^Send a command to another DX Cluster
417 This command allows you to send nearly any command to another DX Cluster
418 node that is connected to the system.
420 Whether you get any output is dependant on a) whether the other system knows
421 that the node callsign of this cluster is in fact a node b) whether the
422 other system is allowing RCMDs from this node and c) whether you have
423 permission to send this command at all.
425 === 0^READ^Read the next unread personal message addressed to you
426 === 0^READ <msgno>^Read the specified message
427 You can read any messages that are sent as 'non-personal' and also any
428 message either sent by or sent to your callsign.
431 As a sysop you may read any message on the system
433 === 0^REPLY^Reply (privately) to the last message that you have read
434 === 0^REPLY <msgno>^Reply (privately) to the specified message
435 === 0^REPLY B <msgno>^Reply as a Bulletin to the specified message
436 === 0^REPLY NOPrivate <msgno>^Reply as a Bulletin to the specified message
437 === 0^REPLY RR <msgno>^Reply to the specified message with read receipt
438 You can reply to a message and the subject will automatically have
439 "Re:" inserted in front of it, if it isn't already present.
441 You can also use all the extra qualifiers such as RR, PRIVATE,
442 NOPRIVATE, B that you can use with the SEND command (see SEND
445 === 0^SEND <call> [<call> ...]^Send a message to one or more callsigns
446 === 0^SEND RR <call>^Send a message and ask for a read receipt
447 === 0^SEND COPY <msgno> <call>^Send a copy of a message to someone
448 === 0^SEND PRIVATE <call>^Send a personal message
449 === 0^SEND NOPRIVATE <call>^Send a message to all stations
450 All the SEND commands will create a message which will be sent either to
451 an individual callsign or to one of the 'bulletin' addresses.
453 SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
454 it will mark the message as personal and send it to the cluster node that
455 that callsign is connected to.
457 You can have more than one callsign in all of the SEND commands.
459 You can have multiple qualifiers so that you can have for example:-
461 SEND RR COPY 123 PRIVATE G1TLH G0RDI
463 which should send a copy of message 123 to G1TLH and G0RDI and you will
464 receive a read receipt when they have read the message.
466 SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
467 SP is an alias for SEND PRIVATE
469 === 0^SET/ADDRESS <your address>^Record your postal address
471 === 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal
472 === 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal
474 === 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
476 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
477 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
479 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
481 === 9^SET/DEBUG <name>^Add a debug level to the debug set
482 === 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
484 === 0^SET/DX^Allow DX messages to come out on your terminal
485 === 0^UNSET/DX^Stop DX messages coming out on your terminal
487 === 0^SET/DXGRID^Allow Grid Squares on the end of DX announcements
488 === 0^UNSET/DXGRID^Stop Grid Squares on the end of DX announcements
489 A standard feature which is enabled in version 1.43 and above is
490 that if the spotter's grid square is known it is output on the end
491 of a DX announcement (there is just enough room). Some user programs
492 cannot cope with this. You can use this command to reset (or set)
495 === 5^SET/DXNET <call> [<call>..]^Make the callsign an DXNet node
497 === 0^SET/ECHO^Make the cluster echo your input
498 === 0^UNSET/ECHO^Stop the cluster echoing your input
499 If you are connected via a telnet session, different implimentations
500 of telnet handle echo differently depending on whether you are
501 connected via port 23 or some other port. You can use this command
502 to change the setting appropriately.
504 The setting is stored in your user profile.
506 YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
508 === 0^SET/HERE^Tell the system you are present at your terminal
509 === 0^UNSET/HERE^Tell the system you are absent from your terminal
511 === 0^SET/HOMENODE <node> ^Set your normal cluster callsign
512 Tell the cluster system where you normally connect to. Any Messages sent
513 to you will normally find their way there should you not be connected.
517 === 9^SET/ISOLATE^Isolate a node from the rest of the network
518 Connect a node to your system in such a way that you are a full protocol
519 member of its network and can see all spots on it, but nothing either leaks
520 out from it nor goes back into from the rest of the nodes connected to you.
522 You can potentially connect several nodes in this way.
524 === 9^UNSET/ISOLATE^Stop Isolation of a node from the rest of the network
525 Remove isolation from a node - SET/ISOLATE
527 === 0^SET/LANGUAGE <lang>^Set the language you want to use
528 You can select the language that you want the cluster to use. Currently
529 the languages available are en (english) and nl (dutch).
531 === 0^SET/LOCATION <lat & long>^Set your latitude and longitude
532 === 9^SET/SYS_LOCATION <lat & long>^Set your cluster latitude and longitude
533 In order to get accurate headings and such like you must tell the system
534 what your latitude and longitude is. If you have not yet done a SET/QRA
535 then this command will set your QRA locator for you. For example:-
536 SET/LOCATION 52 22 N 0 57 E
538 === 0^SET/LOGININFO^Inform when a station logs in locally
539 === 0^UNSET/LOGININFO^Inform when a station logs out locally
541 === 9^SET/LOCKOUT <call>^Stop a callsign connecting to the cluster
542 === 9^UNSET/LOCKOUT <call>^Allow a callsign to connect to the cluster
544 === 0^SET/NAME <your name>^Set your name
545 Tell the system what your name is eg:-
548 === 5^SET/NODE <call> [<call>..]^Make the callsign an AK1A cluster
549 Tell the system that the call(s) are to be treated as AK1A cluster and
550 fed PC Protocol rather normal user commands.
552 === 8^SET/OBSCOUNT <count> <nodecall>^Set the 'pump-up' obscelence counter
553 From 1.35 onwards neighbouring nodes are pinged at regular intervals (see
554 SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'
555 counter which is decremented on every outgoing ping and then reset to
556 the 'obscount' value on every incoming ping. The default value of this
559 What this means is that a neighbouring node will be pinged twice at
560 (default) 300 second intervals and if no reply has been heard just before
561 what would be the third attempt, that node is disconnected.
563 If a ping is heard then the obscount is reset to the full value. Using
564 default values, if a node has not responded to a ping within 15 minutes,
567 === 0^SET/PAGE <lines per page>^Set the lines per page
568 Tell the system how many lines you wish on a page when the number of line
569 of output from a command is more than this. The default is 20. Setting it
570 explicitly to 0 will disable paging.
574 The setting is stored in your user profile.
576 === 9^SET/PINGINTERVAL <time> <nodecall>^Set ping time to neighbouring nodes
577 As from release 1.35 all neighbouring nodes are pinged at regular intervals
578 in order to determine the rolling quality of the link and, in future, to
579 affect routing decisions. The default interval is 300 secs or 5 minutes.
581 You can use this command to set a different interval. Please don't.
583 But if you do the value you enter is treated as minutes up 60 and seconds
584 for numbers greater than that.
586 This is used also to help determine when a link is down at the far end
587 (as certain cluster software doesn't always notice), see SET/OBSCOUNT
588 for more information.
590 === 9^SET/PRIVILEGE <n> <call> [<call..]^Set privilege level on a call
591 Set the privilege level on a callsign. The privilege levels that pertain
592 to commands are as default:-
594 1 - allow remote nodes normal user RCMDs
595 5 - various privileged commands (including shutdown, but not disc-
596 connect), the normal level for another node.
597 8 - more privileged commands (including disconnect)
598 9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
600 If you are a sysop and you come in as a normal user on a remote connection
601 your privilege will automatically be set to 0.
603 === 9^SET/PASSWORD <callsign> <string>^Set a users password
604 The password for a user can only be set by a full sysop. The string
605 can contain any characters but any spaces are removed (you can type in
606 spaces - but they won't appear in the password). You can see the
607 result with STAT/USER.
609 === 5^SET/SPIDER <call> [<call>..]^Make the callsign an DXSpider node
610 Tell the system that the call(s) are to be treated as DXSpider node and
611 fed new style DX Protocol rather normal user commands.
613 === 9^SET/SYS_QRA <locator>^Set your cluster QRA locator
614 === 0^SET/QRA <locator>^Set your QRA locator
615 Tell the system what your QRA (or Maidenhead) locator is. If you have not
616 done a SET/LOCATION then your latitude and longitude will be set roughly
617 correctly (assuming your locator is correct ;-). For example:-
620 === 0^SET/QTH <your qth>^Set your QTH
621 Tell the system where you are. For example:-
622 SET/QTH East Dereham, Norfolk
624 === 0^SET/TALK^Allow TALK messages to come out on your terminal
625 === 0^UNSET/TALK^Stop TALK messages coming out on your terminal
627 === 0^SET/WCY^Allow WCY messages to come out on your terminal
628 === 0^UNSET/WCY^Stop WCY messages coming out on your terminal
630 === 0^SET/WWV^Allow WWV messages to come out on your terminal
631 === 0^UNSET/WWV^Stop WWV messages coming out on your terminal
633 === 0^SET/WX^Allow WX messages to come out on your terminal
634 === 0^UNSET/WX^Stop WX messages coming out on your terminal
636 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
637 This is very nearly the same as SHOW/TIME, the only difference the format
638 of the date string if no arguments are given.
640 If no prefixes or callsigns are given then this command returns the local
641 time and UTC as the computer has it right now. If you give some prefixes
642 then it will show UTC and UTC + the local offset (not including DST) at
643 the prefixes or callsigns that you specify.
645 === 0^SHOW/DX^Interrogate the spot database
646 If you just type SHOW/DX you will get the last so many spots
647 (sysop configurable, but usually 10).
649 In addition you can add any number of these commands in very nearly
650 any order to the basic SHOW/DX command, they are:-
652 on <band> - eg 160m 20m 2m 23cm 6mm
653 on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
655 <number> - the number of spots you want
656 <from>-<to> - <from> spot no <to> spot no in the selected list
658 <prefix> - for a spotted callsign beginning with <prefix>
659 *<suffix> - for a spotted callsign ending in <suffix>
660 *<string>* - for a spotted callsign containing <string>
662 day <number> - starting <number> days ago
663 day <from>-<to> - <from> days <to> days ago
665 info <text> - any spots containing <text> in the info or remarks
667 by <call> - any spots spotted by <call> (spotter <call> is the
670 qsl - this automatically looks for any qsl info on the call
671 held in the spot database.
673 iota [<iota>] - If the iota island number is missing it will look for
674 the string iota and anything which looks like an iota
675 island number. If you specify then it will look for
678 qra [<locator>] - this will look for the specific locator if you specify
679 one or else anything that looks like a locator.
684 SH/DX on 20m info iota
685 SH/DX 9a on vhf day 30
691 === 0^SHOW/DXCC <prefix>^Interrogate the spot database by country
692 This command takes the <prefix> (which can be a full or partial
693 callsign if desired), looks up which internal country number it is
694 and then displays all the spots as per SH/DX for that country.
696 The options for SHOW/DX also apply to this command.
700 SH/DXCC W on 20m info iota
702 === 0^SHOW/FILES [<filearea> [<string>]]^List the contents of a filearea
703 SHOW/FILES on its own will show you a list of the various fileareas
704 available on the system. To see the contents of a particular file
707 where <filearea> is the name of the filearea you want to see the
710 You can also use shell globbing characters like '*' and '?' in a
711 string to see a selection of files in a filearea eg:-
712 SH/FILES bulletins arld*
714 See also TYPE - to see the contents of a file.
716 === 1^SHOW/ISOLATE^Show list of ISOLATED nodes
718 === 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
720 === 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
721 Show the Moon rise and set times for a (list of) prefixes or callsigns,
722 together with the azimuth and elevation of the sun currently at those
725 If you don't specify any prefixes or callsigns, it will show the times for
726 your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
727 together with the current azimuth and elevation.
729 In addition, it will show the gain or loss dB relative to the nominal
730 distance of 385,000Km due to the ellipsoidal nature of the orbit.
732 If all else fails it will show the Moonrise and set times for the node
733 that you are connected to.
740 === 0^SHOW/MUF <prefix> [<hours>][long]^Show the likely propagation to a prefix
741 This command allow you to estimate the likelihood of you contacting
742 a station with the prefix you have specified. The output assumes a modest
743 power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)
745 The result predicts the most likely operating frequencies and signal
746 levels for high frequency (shortwave) radio propagation paths on
747 specified days of the year and hours of the day. It is most useful for
748 paths between 250 km and 6000 km, but can be used with reduced accuracy
749 for paths shorter or longer than this.
751 The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and
752 used to predict the MUF given the predicted flux, day of the year,
753 hour of the day and geographic coordinates of the transmitter and
754 receiver. This routine is reasonably accurate for the purposes here,
755 with a claimed RMS error of 3.8 MHz, but much smaller and less complex
756 than the programs used by major shortwave broadcasting organizations,
757 such as the Voice of America.
759 The command will display some header information detailing its
760 assumptions, together with the locations, latitude and longitudes and
761 bearings. It will then show UTC (UT), local time at the other end
762 (LT), calculate the MUFs, Sun zenith angle at the midpoint of the path
763 (Zen) and the likely signal strengths. Then for each frequency for which
764 the system thinks there is a likelihood of a circuit it prints a value.
766 The value is currently a likely S meter reading based on the conventional
767 6dB / S point scale. If the value has a '+' appended it means that it is
768 1/2 an S point stronger. If the value is preceeded by an 'm' it means that
769 there is likely to be much fading and by an 's' that the signal is likely
772 By default SHOW/MUF will show the next two hours worth of data. You
773 can specify anything up to 24 hours worth of data by appending the no of
774 hours required after the prefix. For example:-
780 RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
781 Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
782 Location Lat / Long Azim
783 East Dereham, Norfolk 52 41 N 0 57 E 47
784 United-States-W 43 0 N 87 54 W 299
785 UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
786 18 23 11.5 -35 mS0+ mS2 S3
787 19 0 11.2 -41 mS0+ mS2 S3
789 indicating that you will have weak, fading circuits on top band and
790 80m but usable signals on 40m (about S3).
796 will get you the above display, but with the next 24 hours worth of
802 Gives you an estimate of the long path propagation characterics. It
803 should be noted that the figures will probably not be very useful, nor
804 terrible accurate, but it is included for completeness.
806 === 1^SHOW/NODE [<callsign> ...]^Show the type and version number of nodes
807 Show the type and version (if connected) of the nodes specified on the
808 command line. If no callsigns are specified then a sorted list of all
809 the non-user callsigns known to the system will be displayed.
811 === 0^SHOW/PREFIX <callsign>^Interrogate the prefix database
812 This command takes the <callsign> (which can be a full or partial
813 callsign or a prefix), looks up which internal country number
814 it is and then displays all the relevant prefixes for that country
815 together with the internal country no, the CQ and ITU regions.
819 === 5^SHOW/PROGRAM^Show the locations of all the included program modules
820 Show the name and location where every program module was load from. This
821 is useful for checking where you think you have loaded a .pm file from.
823 === 0^SHOW/QRA <locator> [<locator>]^Show distance between locators
824 === 0^SHOW/QRA <lat> <long>^Convert latitude and longitude to a locator
825 This is a multipurpose command that allows you either to calculate the
826 distance and bearing between two locators or (if only one locator is
827 given on the command line) the distance and beraing from your station
828 to the locator. For example:-
833 The first example will show the distance and bearing to the locator from
834 yourself, the second example will calculate the distance and bearing from
835 the first locator to the second. You can use 4 or 6 character locators.
837 It is also possible to convert a latitude and longitude to a locator by
838 using this command with a latitude and longitude as an argument, for
841 SH/QRA 52 41 N 0 58 E
843 === 0^SHOW/SATELLITE <name> [<hours> <interval>]^Show tracking data
844 Show the tracking data from your location to the satellite of your choice
845 from now on for the next few hours.
847 If you use this command without a satellite name it will display a list
848 of all the satellites known currently to the system.
850 If you give a name then you can obtain tracking data of all the passes
851 that start and finish 5 degrees below the horizon. As default it will
852 give information for the next three hours for every five minute period.
854 You can alter the number of hours and the step size, within certain
857 Each pass in a period is separated with a row of '-----' characters
864 === 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
865 Show the sun rise and set times for a (list of) prefixes or callsigns,
866 together with the azimuth and elevation of the sun currently at those
869 If you don't specify any prefixes or callsigns, it will show the times for
870 your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
871 together with the current azimuth and elevation.
873 If all else fails it will show the sunrise and set times for the node
874 that you are connected to.
881 === 0^SHOW/TIME [<prefix>|<callsign>]^Show the local time
882 If no prefixes or callsigns are given then this command returns the local
883 time and UTC as the computer has it right now. If you give some prefixes
884 then it will show UTC and UTC + the local offset (not including DST) at
885 the prefixes or callsigns that you specify.
887 === 0^SHOW/WCY^Show last 10 WCY broadcasts
888 === 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
889 Display the most recent WCY information that has been received by the system
891 === 0^SHOW/WWV^Show last 10 WWV broadcasts
892 === 0^SHOW/WWV <n>^Show last <n> WWV broadcasts
893 Display the most recent WWV information that has been received by the system
895 === 5^SHUTDOWN^Shutdown the cluster
896 Shutdown the cluster and disconnect all the users
898 === 9^SPOOF <call> <command>^Do a command as though you are another user
899 This command is provided so that sysops can set a user's parameters without
900 me having to write a special 'sysop' version for every user command. It
901 allows you to pretend that you are doing the command as the user you specify.
905 SPOOF G1TLH set/name Dirk
906 SPOOF G1TLH set/qra JO02LQ
908 === 5^STAT/DB <dbname>^Show the status of a database
909 Show the internal status of a database descriptor.
911 Depending on your privilege level you will see more or less information.
912 This command is unlikely to be of much use to anyone other than a sysop.
914 === 5^STAT/CHANNEL [<callsign>]^Show the status of a channel on the cluster
915 Show the internal status of the channel object either for the channel that
916 you are on or else for the callsign that you asked for.
918 Only the fields that are defined (in perl term) will be displayed.
920 === 5^STAT/MSG <msgno>^Show the status of a message
921 This command shows the internal status of a message and includes information
922 such as to whom it has been forwarded, its size, origin etc etc.
924 === 5^STAT/USER [<callsign>]^Show the full status of a user
925 Shows the full contents of a user record including all the secret flags
928 Only the fields that are defined (in perl term) will be displayed.
930 === 0^SYSOP^Regain your privileges if you login remotely
931 The system automatically reduces your privilege level to that of a
932 normal user if you login in remotely. This command allows you to
933 regain your normal privilege level. It uses the normal system: five
934 numbers are returned that are indexes into the character array that is
935 your assigned password (see SET/PASSWORD). The indexes start from
938 You are expected to return a string which contains the characters
939 required in the correct order. You may intersperse those characters
940 with others to obscure your reply for any watchers. For example (and
941 these values are for explanation :-):
943 password = 012345678901234567890123456789
947 aa2bbbb0ccc5ddd7xxx3n
951 They will all match. If there is no password you will still be offered
952 numbers but nothing will happen when you input a string. Any match is
955 === 0^TALK <call> [<text>]^Send a text message to another station
956 === 0^TALK <call> > <node> [<text>]^Send a text message to another station via a node
957 Send a short message to any other station that is visible on the cluster
958 system. You can send it to anyone you can see with a SHOW/CONFIGURATION
959 command, they don't have to be connected locally.
961 The second form of TALK is used when other cluster nodes are connected
962 with restricted information. This usually means that they don't send
963 the user information usually associated with logging on and off the cluster.
965 If you know that G3JNB is likely to be present on GB7TLH, but you can only
966 see GB7TLH in the SH/C list but with no users, then you would use the
967 second form of the talk message.
969 If you want to have a ragchew with someone you can leave the text message
970 out and the system will go into 'Talk' mode. What this means is that a
971 short message is sent to the recipient telling them that you are in a
972 'Talking' frame of mind and then you just type - everything you send will
973 go to the station that you asked for.
975 All the usual announcements, spots and so on will still come out on your
978 If you want to do something (such as send a spot) you preceed the normal
979 command with a '/' character, eg:-
981 /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
984 To leave talk mode type:
988 === 0^TYPE <filearea>/<name>^Look at the contents of a file in one of the fileareas
989 Type out the contents of a file in a filearea. So, for example, in
990 filearea 'bulletins' you want to look at file 'arld051' you would
992 TYPE bulletins/arld051
994 See also SHOW/FILES to see what fileareas are available and a
997 === 0^WHO^Show who is physically connected
998 This is a quick listing that shows which callsigns are connected and
999 what sort of connection they have
1001 === 0^WX <text>^Send a weather message to local users
1002 === 0^WX FULL <text>^Send a weather message to all cluster users
1003 === 5^WX SYSOP <text>^Send a weather message to other clusters only
1004 Weather messages can sometimes be useful if you are experiencing an extreme
1005 that may indicate enhanced conditions