3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 badnode1 => '$_[0] is now a bad node',
18 badnode2 => '$_[0] is now a good node',
19 badnode3 => 'List of Bad Nodes:-',
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
21 bbs => 'Your BBS Address is now \"$_[0]\"',
22 beepoff => 'Beeps are now off',
23 beepon => 'Beeps are now on',
24 call1 => 'Callsign lookup via $_[0]:',
25 conother => 'Sorry $_[0] you are connected on another port',
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster',
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
28 confail => 'connection to $_[0] failed ($_[1])',
29 constart => 'connection to $_[0] started',
30 disc1 => 'Disconnected by $_[0]',
31 disc2 => '$_[0] disconnected',
32 db1 => 'This database is hosted at $_[0]',
33 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
34 db3 => 'Sorry, database $_[0] doesn\'t exist here',
35 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
36 db5 => 'Accessing remote database on $_[0]...standby...',
37 db6 => 'Database $_[0] already exists, delete it first',
38 db7 => 'Database $_[0] created for remote node $_[1]',
39 db8 => 'Database $_[0] created locally',
40 db9 => 'Database $_[0] removed',
41 db10 => '$_[0] records imported into $_[1]',
42 db11 => 'Sending your request(s) to $_[0], please stand by...',
43 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
44 dup => 'Sorry, this is a duplicate',
45 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
46 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
47 dxs => 'DX Spots flag set on $_[0]',
48 dxu => 'DX Spots flag unset on $_[0]',
49 e1 => 'Invalid command',
51 e3 => '$_[0]: $_[1] not found',
52 e4 => 'Need at least a prefix or callsign',
54 e6 => '*** No station specified ***',
55 e7 => 'callsign $_[0] not visible on the cluster',
56 e8 => 'Need a callsign and some text',
57 e9 => 'Need at least some text',
58 e10 => '$_[0] not connected locally',
59 e11 => 'Can\'t use $main:mycall as target',
60 e12 => 'Need a node callsign',
61 e13 => '$_[0] is not a node',
62 e14 => 'First argument must be numeric and > 0',
63 e15 => 'invalid qualifier \"$_[0]\"',
64 e16 => 'File \"$_[0]\" exists',
65 e17 => 'Please don\'t use the words: @_ on here',
66 e18 => 'Cannot connect to $_[0] ($!)',
67 e19 => 'Invalid character in line',
68 e20 => 'token $_[0] not recognised',
69 e21 => '$_[0] not numeric',
70 e22 => '$_[0] not a callsign',
71 e23 => '$_[0] not a range (eg 0/30000)',
72 e24 => 'Sorry, Internet access is not enabled',
73 e25 => 'Sorry the value must be between $_[0] and $_[1]',
75 echoon => 'Echoing enabled',
76 echooff => 'Echoing disabled',
77 echow => '*Echoing is currently disabled, set/echo to enable',
78 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
79 emaila => 'Your E-Mail Address is now \"$_[0]\"',
80 email => 'E-mail address set to: $_[0]',
81 export1 => 'usage: export <msgno> <filename>',
82 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
83 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
84 filter1 => 'Filter $_[0] updated for $_[1]',
85 filter2 => 'Need a value for $_[0]',
86 filter3 => 'No filters defined for $_[0]',
87 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
88 filter5 => 'need some filter commands...',
89 filter6 => '$_[0]$_[1] Filter for $[2] not found',
90 grids => 'DX Grid flag set on $_[0]',
91 gridu => 'DX Grid flag unset on $_[0]',
92 hasha => '$_[0] already exists in $_[1]',
93 hashb => '$_[0] added to $_[1]',
94 hashc => '$_[0] removed from $_[1]',
95 hashd => '$_[0] not in $_[1]',
96 hashe => '$_[0] set on $_[1]',
97 helpe1 => 'Help system unavailable, tell sysop',
98 helpe2 => 'No help available on $_[0]',
99 heres => 'Here set on $_[0]',
100 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
101 hereu => 'Here unset on $_[0]',
102 homebbs => 'Home BBS set to: $_[0]',
103 homenode => 'Home Node set to: $_[0]',
104 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
105 hnodee2 => 'Failed to set homenode on $_[0]',
106 hnode => 'Your Homenode is now \"$_[0]\"',
107 init1 => 'sent initialisation message to $_[0]',
108 iso => '$_[0] Isolated',
109 isou => '$_[0] UnIsolated',
110 isoc => '$_[0] created and Isolated',
111 l1 => 'Sorry $_[0], you are already logged on on another channel',
112 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
113 lang => 'Language is now $_[0]',
114 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
115 lange2 => 'failed to set language on $_[0]',
116 lh1 => '$main::data/hop_table.pl doesn\'t exist',
117 loce1 => 'Please enter your location,, set/location <latitude longitude>',
118 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
119 loc => 'Your Lat/Long is now \"$_[0]\"',
120 lockout => '$_[0] Locked out',
121 lockoutc => '$_[0] Created and Locked out',
122 lockoutun => '$_[0] Unlocked',
123 loginu => 'User $_[0] has logged in',
124 logoutu => 'User $_[0] has logged out',
125 loginn => 'Node $_[0] has logged in',
126 logoutn => 'Node $_[0] has logged out',
127 m1 => 'Enter Subject (30 characters):',
128 m2 => 'Copy of msg $_[0] sent to $_[1]',
129 m3 => 'Sorry, $_[0] is an unacceptable TO address',
130 m4 => 'Sorry, can\'t access message $_[0]',
131 m5 => 'Sorry, I need a message number',
132 m6 => 'Reply to: $_[0]',
133 m7 => 'Subject : $_[0]',
134 m8 => 'Enter Message /EX to send or /ABORT to exit',
135 m9 => 'New mail has arrived for you',
136 m10 => 'Message Aborted',
137 m11 => 'Message no $_[0] saved and directed to $_[1]',
138 m12 => 'Message no $_[0] deleted',
139 m13 => 'Message no $_[0] missing',
140 m14 => 'Message no $_[0] marked as sent to $_[1]',
141 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
142 m16 => 'Need a Message number',
143 m17 => 'Sorry, cannot send messages in $_[0] mode',
144 msg1 => 'Bulletin Messages Queued',
145 msg2 => 'Private Messages Queued',
146 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
147 msgu => 'usage: msg <cmd> <msgno> data...',
148 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
149 moon => 'Location Rise Set Azim Elev RGain dB',
150 namee1 => 'Please enter your name, set/name <your name>',
151 namee2 => 'Can\'t find user $_[0]!',
152 name => 'Your name is now \"$_[0]\"',
153 nodea => '$_[0] set as AK1A style Node',
154 nodeac => '$_[0] created as AK1A style Node',
155 nodec => '$_[0] set as CLX style Node',
156 nodecc => '$_[0] created as CLX style Node',
157 noder => '$_[0] set as AR-Cluster style Node',
158 noderc => '$_[0] created as AR-Cluster style Node',
159 nodes => '$_[0] set as DXSpider style Node',
160 nodesc => '$_[0] created as DXSpider style Node',
161 nodex => '$_[0] set as DXNET style Node',
162 nodexc => '$_[0] created as DXNET style Node',
163 nodeu => '$_[0] set back as a User',
164 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
165 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
166 ok => 'Operation successful',
167 outconn => 'Outstanding connect to $_[0]',
168 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
169 pagelth => 'Page Length is now $_[0]',
170 passerr => 'Please use: SET/PASS <password> <callsign>',
171 password => 'Password set or changed for $_[0]',
172 pingo => 'Ping Started to $_[0]',
173 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
174 pinge1 => 'Cannot ping yourself!',
175 pingint => 'Ping interval on $_[0] set to $_[1] secs',
176 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
177 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
178 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
179 priv => 'Privilege level changed on $_[0]',
180 prx => '$main::mycall >',
181 qll => 'Please enter your location with set/location or set/qra',
182 qthe1 => 'Please enter your QTH, set/qth <your qth>',
183 qth => 'Your QTH is now \"$_[0]\"',
184 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
185 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
186 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
187 qra => 'Your QRA Locator is now \"$_[0]\"',
188 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
189 rec => '$_[0] records',
190 read1 => 'Sorry, no new messages for you',
191 read2 => 'Msg $_[0] not found',
192 read3 => 'Msg $_[0] not available',
193 route => '$_[0] on $_[1] via $_[2]',
194 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
195 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
196 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
197 sat4 => 'Satellites available:-',
198 satnf => 'Satellite $_[0] unknown',
200 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
201 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
202 sethop3 => 'No hops set for $_[0]',
203 shutting => '$main::mycall shutting down...',
204 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
205 snode1 => 'Node Call Sort Version',
206 snode2 => '$_[0] $_[1] $_[2]',
207 snode3 => '$_[0] Unknown Call',
208 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
210 spf1 => 'spoof: creating new user $_[0]',
211 sun => 'Location Rise Set Azim Elev',
212 suser1 => 'usage: callsign user_field_name value',
213 suser2 => 'User $_[0] not found',
214 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
215 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
216 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
217 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
218 time3 => '$_[0] $_[1]',
219 talks => 'Talk flag set on $_[0]',
220 talku => 'Talk flag unset on $_[0]',
221 talkend => 'Finished talking to you',
222 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
223 talkprompt => 'Talk ($_[0])>',
224 talkstart => 'Starting talking to you',
225 usernf => '*** User record for $_[0] not found ***',
226 wwvs => 'WWV flag set on $_[0]',
227 wwvu => 'WWV flag unset on $_[0]',
228 wxs => 'WX flag set on $_[0]',
229 wxu => 'WX flag unset on $_[0]',
232 addr => 'Addres gezet op: $_[0]',
233 already => '$_[0] reeds geconnect',
234 anns => 'Announce berichten AAN gezet voor $_[0]',
235 annu => 'Announce berichten UIT gezet voor $_[0]',
236 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
237 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
238 beepoff => 'De beep staat nu UIT',
239 beepon => 'De beep staat nu AAN',
240 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
241 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
242 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
243 confail => 'Verbinding met $_[0] mislukt ($_[1])',
244 constart => 'Verbinding met $_[0] gestart',
245 disc1 => 'Gedisconnect door $_[0]',
246 disc2 => '$_[0] gedisconnect',
247 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
248 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
249 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
250 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
251 e1 => 'Ongeldige opdracht',
253 e3 => '$_[0]: $_[1] niet gevonden',
254 e4 => 'Minimaal een prefix of een call nodig',
255 e5 => 'Niet toegestaan',
256 e6 => '*** Geen station gespecifiseerd ***',
257 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
258 e8 => 'Ik heb een call en tekst nodig',
259 e9 => 'Ik heb wel tekst nodig voor een announce!',
260 e10 => '$_[0] is niet lokaal verbonden',
261 e12 => 'Ik heb een node call nodig',
262 e13 => '$_[0] is geen node',
263 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
264 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
265 email => 'E-mail addres gezet op: $_[0]',
266 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
267 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
268 heres => 'Aanwezigheid AAN gezet voor $_[0]',
269 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
270 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
271 homebbs => 'Uw Home mailbox is nu $_[0]',
272 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
273 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
274 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
275 iso => '$_[0] is geisoleerd (Isolated)',
276 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
277 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
278 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
279 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
280 lh1 => '$main::data/hop_table.pl bestaat niet',
281 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
282 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
283 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
284 lockout => '$_[0] heeft geen toegang meer (Locked out)',
285 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
286 m2 => '$_[0] Informatie: $_[1]',
287 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
288 msgnew => 'Er is nieuwe post gearriveerd voor u',
289 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
290 namee2 => 'Gebruiker $_[0] niet te vinden!',
291 name => 'Uw naam is gezet op \"$_[0]\"',
292 node => '$_[0] gezet als een AK1A stijl DX-cluster',
293 nodeu => '$_[0] teruggezet naar gebruiker status',
294 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
295 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
296 ok => 'Opdracht succesvol uitgevoerd',
297 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
298 pagelth => 'Paginalengte gezet op ($_[0]) regels',
299 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
300 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
301 pingo => 'Ping gestart naar $_[0]',
302 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
303 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
304 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
305 priv => 'Privilege level gewijzigd op $_[0]',
306 prx => '$main::mycall >',
307 qll => 'Geef uw locator met set/location of set/qra',
308 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
309 qth => 'Uw QTH is nu \"$_[0]\"',
310 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
311 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
312 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
313 qra => 'Uw QRA Locator is nu \"$_[0]\"',
314 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
315 read1 => 'Sorry, geen berichten voor u',
316 read2 => 'Bericht $_[0] niet gevonden',
317 read3 => 'Bericht $_[0] niet beschikbaar',
318 shutting => '$main::mycall gaat QRT...',
319 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
320 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
321 talks => 'Talk berichten AAN gezet voor $_[0]',
322 talku => 'Talk berichten UIT gezet voor $_[0]',
323 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
324 wwvs => 'WWV berichten AAN gezet voor $_[0]',
325 wwvu => 'WWV berichten UIT gezet voor $_[0]',
326 wxs => 'WX berichten AAN gezet voor $_[0]',
327 wxu => 'WX berichten UIT gezet voor $_[0]',
projects / spider.git / blob