3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 annts => 'AnnTalk flag set on $_[0]',
18 anntu => 'AnnTalk flag unset on $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots flag set on $_[0]',
56 dxu => 'DX Spots flag unset on $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
87 echoon => 'Echoing enabled',
88 echooff => 'Echoing disabled',
89 echow => '*Echoing is currently disabled, set/echo to enable',
90 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
91 emaila => 'Your E-Mail Address is now \"$_[0]\"',
92 email => 'E-mail address set to: $_[0]',
93 export1 => 'usage: export <msgno> <filename>',
94 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
95 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
96 filter1 => 'Filter $_[0] updated for $_[1]',
97 filter2 => 'Unknown filter keyword $_[0]',
98 filter3 => 'No filters defined for $_[0]',
99 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
100 filter5 => 'need some filter commands...',
101 filter6 => '$_[0]$_[1] Filter for $[2] not found',
102 grids => 'DX Grid flag set on $_[0]',
103 gridu => 'DX Grid flag unset on $_[0]',
104 illcall => 'Sorry, $_[0] is an invalid callsign',
105 hasha => '$_[0] already exists in $_[1]',
106 hashb => '$_[0] added to $_[1]',
107 hashc => '$_[0] removed from $_[1]',
108 hashd => '$_[0] not in $_[1]',
109 hashe => '$_[0] set on $_[1]',
110 helpe1 => 'Help system unavailable, tell sysop',
111 helpe2 => 'No help available on $_[0]',
112 heres => 'Here set on $_[0]',
113 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
114 hereu => 'Here unset on $_[0]',
115 homebbs => 'Home BBS set to: $_[0]',
116 homenode => 'Home Node set to: $_[0]',
117 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
118 hnodee2 => 'Failed to set homenode on $_[0]',
119 hnode => 'Your Homenode is now \"$_[0]\"',
120 init1 => 'sent initialisation message to $_[0]',
121 iso => '$_[0] Isolated',
122 isou => '$_[0] UnIsolated',
123 isoc => '$_[0] created and Isolated',
124 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
125 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
126 isow => '$_[0] is isolated; unset/isolate $_[0] first',
127 l1 => 'Sorry $_[0], you are already logged on on another channel',
128 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
129 lang => 'Language is now $_[0]',
130 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
131 lange2 => 'failed to set language on $_[0]',
132 lh1 => '$main::data/hop_table.pl doesn\'t exist',
133 loce1 => 'Please enter your location,, set/location <latitude longitude>',
134 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
135 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
136 loc => 'Your Lat/Long is now \"$_[0]\"',
137 lockout => '$_[0] Locked out',
138 lockoutc => '$_[0] Created and Locked out',
139 lockoutun => '$_[0] Unlocked',
140 lockoutuse => 'usage: sh/lockout <call>|ALL',
141 loginu => 'User $_[0] has logged in',
142 logoutu => 'User $_[0] has logged out',
143 loginn => 'Node $_[0] has logged in',
144 logoutn => 'Node $_[0] has logged out',
145 m1 => 'Enter Subject (30 characters):',
146 m2 => 'Copy of msg $_[0] sent to $_[1]',
147 m3 => 'Sorry, $_[0] is an unacceptable TO address',
148 m4 => 'Sorry, can\'t access message $_[0]',
149 m5 => 'Sorry, I need a message number',
150 m6 => 'Reply to: $_[0]',
151 m7 => 'Subject : $_[0]',
152 m8 => 'Enter Message /EX to send or /ABORT to exit',
153 m9 => 'New mail has arrived for you',
154 m10 => 'Message Aborted',
155 m11 => 'Message no $_[0] saved and directed to $_[1]',
156 m12 => 'Message no $_[0] deleted',
157 m13 => 'Message no $_[0] missing',
158 m14 => 'Message no $_[0] marked as sent to $_[1]',
159 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
160 m16 => 'Need a Message number',
161 m17 => 'Sorry, cannot send messages in $_[0] mode',
162 msg1 => 'Bulletin Messages Queued',
163 msg2 => 'Private Messages Queued',
164 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
165 msgu => 'usage: msg <cmd> <msgno> data...',
166 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
167 moon => 'Location dd/mm/yyyy Rise Set',
168 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
169 mond => 'Monitoring Disabled',
170 mone => 'Monitoring Enabled',
171 namee1 => 'Please enter your name, set/name <your name>',
172 namee2 => 'Can\'t find user $_[0]!',
173 name => 'Your name is now \"$_[0]\"',
174 nodea => '$_[0] set as AK1A style Node',
175 nodeac => '$_[0] created as AK1A style Node',
176 nodeb => '$_[0] set as BBS',
177 nodebc => '$_[0] created as BBS',
178 nodec => '$_[0] set as CLX style Node',
179 nodecc => '$_[0] created as CLX style Node',
180 noder => '$_[0] set as AR-Cluster style Node',
181 noderc => '$_[0] created as AR-Cluster style Node',
182 nodes => '$_[0] set as DXSpider style Node',
183 nodesc => '$_[0] created as DXSpider style Node',
184 nodex => '$_[0] set as DXNET style Node',
185 nodexc => '$_[0] created as DXNET style Node',
186 nodeu => '$_[0] set back as a User',
187 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
188 notdone => 'NOT Done',
189 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
190 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
191 ok => 'Operation successful',
192 outconn => 'Outstanding connect to $_[0]',
193 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
194 pagelth => 'Page Length is now $_[0]',
195 passerr => 'Please use: SET/PASS <password> <callsign>',
196 password => 'Password set or changed for $_[0]',
197 passwordu => 'Password removed for $_[0]',
198 pingo => 'Ping Started to $_[0]',
199 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
200 pinge1 => 'Cannot ping yourself!',
201 pingint => 'Ping interval on $_[0] set to $_[1] secs',
202 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
203 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
204 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
205 priv => 'Privilege level changed on $_[0]',
206 prx => '$main::mycall >',
207 pw0 => 'Enter old password: ',
208 pw1 => 'Enter new password: ',
209 pw2 => 'Re-enter new password: ',
210 pw3 => 'Password changed',
211 pw4 => 'Passwords differ, password NOT changed',
212 qll => 'Please enter your location with set/location or set/qra',
213 qthe1 => 'Please enter your QTH, set/qth <your qth>',
214 qth => 'Your QTH is now \"$_[0]\"',
215 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
216 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
217 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
218 qra => 'Your QRA Locator is now \"$_[0]\"',
219 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
220 read1 => 'Sorry, no new messages for you',
221 read2 => 'Msg $_[0] not found',
222 read3 => 'Msg $_[0] not available',
223 rec => '$_[0] records',
224 reg => '$_[0] registered',
225 regc => '$_[0] created and registered',
226 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
227 regun => '$_[0] unregistered',
228 route => '$_[0] on $_[1] via $_[2]',
229 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
230 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
231 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
232 sat4 => 'Satellites available:-',
233 satnf => 'Satellite $_[0] unknown',
235 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
236 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
237 sethop3 => 'No hops set for $_[0]',
238 shutting => '$main::mycall shutting down...',
239 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
240 snode1 => 'Node Call Sort Version',
241 snode2 => '$_[0] $_[1] $_[2]',
242 snode3 => '$_[0] Unknown Call',
243 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
245 spf1 => 'spoof: creating new user $_[0]',
246 stathf => 'HF DX Spot Stats, last 31 days',
247 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
248 statvhf => 'VHF+ DX Spot Stats, last 31 days',
249 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
250 statdx => 'Total DX Spots last 31 days',
251 sun => 'Location dd/mm/yyyy Rise Set',
252 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
253 suser1 => 'usage: callsign user_field_name value',
254 suser2 => 'User $_[0] not found',
255 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
256 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
257 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
258 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
259 time3 => '$_[0] $_[1]',
260 talks => 'Talk flag set on $_[0]',
261 talku => 'Talk flag unset on $_[0]',
262 talkend => 'Finished talking to you',
263 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
264 talknh => 'Sorry $_[0] is not online at the moment',
265 talkprompt => 'Talk ($_[0])>',
266 talkstart => 'Starting talking to you',
267 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
268 unsethop2 => 'hops unset on $_[1] for $_[0]',
269 usernf => '*** User record for $_[0] not found ***',
270 wcy1 => '$_[0] is missing or out of range',
271 wcy2 => 'Duplicate WCY',
272 wwvs => 'WWV flag set on $_[0]',
273 wwvu => 'WWV flag unset on $_[0]',
274 wxs => 'WX flag set on $_[0]',
275 wxu => 'WX flag unset on $_[0]',
278 addr => 'Addres gezet op: $_[0]',
279 already => '$_[0] reeds geconnect',
280 anns => 'Announce berichten AAN gezet voor $_[0]',
281 annu => 'Announce berichten UIT gezet voor $_[0]',
282 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
283 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
284 beepoff => 'De beep staat nu UIT',
285 beepon => 'De beep staat nu AAN',
286 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
287 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
288 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
289 confail => 'Verbinding met $_[0] mislukt ($_[1])',
290 constart => 'Verbinding met $_[0] gestart',
291 disc1 => 'Gedisconnect door $_[0]',
292 disc2 => '$_[0] gedisconnect',
293 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
294 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
295 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
296 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
297 e1 => 'Ongeldige opdracht',
299 e3 => '$_[0]: $_[1] niet gevonden',
300 e4 => 'Minimaal een prefix of een call nodig',
301 e5 => 'Niet toegestaan',
302 e6 => '*** Geen station gespecifiseerd ***',
303 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
304 e8 => 'Ik heb een call en tekst nodig',
305 e9 => 'Ik heb wel tekst nodig voor een announce!',
306 e10 => '$_[0] is niet lokaal verbonden',
307 e12 => 'Ik heb een node call nodig',
308 e13 => '$_[0] is geen node',
309 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
310 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
311 email => 'E-mail addres gezet op: $_[0]',
312 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
313 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
314 heres => 'Aanwezigheid AAN gezet voor $_[0]',
315 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
316 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
317 homebbs => 'Uw Home mailbox is nu $_[0]',
318 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
319 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
320 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
321 iso => '$_[0] is geisoleerd (Isolated)',
322 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
323 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
324 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
325 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
326 lh1 => '$main::data/hop_table.pl bestaat niet',
327 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
328 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
329 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
330 lockout => '$_[0] heeft geen toegang meer (Locked out)',
331 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
332 m2 => '$_[0] Informatie: $_[1]',
333 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
334 msgnew => 'Er is nieuwe post gearriveerd voor u',
335 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
336 namee2 => 'Gebruiker $_[0] niet te vinden!',
337 name => 'Uw naam is gezet op \"$_[0]\"',
338 node => '$_[0] gezet als een AK1A stijl DX-cluster',
339 nodeu => '$_[0] teruggezet naar gebruiker status',
340 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
341 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
342 ok => 'Opdracht succesvol uitgevoerd',
343 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
344 pagelth => 'Paginalengte gezet op ($_[0]) regels',
345 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
346 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
347 pingo => 'Ping gestart naar $_[0]',
348 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
349 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
350 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
351 priv => 'Privilege level gewijzigd op $_[0]',
352 prx => '$main::mycall >',
353 qll => 'Geef uw locator met set/location of set/qra',
354 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
355 qth => 'Uw QTH is nu \"$_[0]\"',
356 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
357 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
358 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
359 qra => 'Uw QRA Locator is nu \"$_[0]\"',
360 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
361 read1 => 'Sorry, geen berichten voor u',
362 read2 => 'Bericht $_[0] niet gevonden',
363 read3 => 'Bericht $_[0] niet beschikbaar',
364 shutting => '$main::mycall gaat QRT...',
365 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
366 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
367 talks => 'Talk berichten AAN gezet voor $_[0]',
368 talku => 'Talk berichten UIT gezet voor $_[0]',
369 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
370 wwvs => 'WWV berichten AAN gezet voor $_[0]',
371 wwvu => 'WWV berichten UIT gezet voor $_[0]',
372 wxs => 'WX berichten AAN gezet voor $_[0]',
373 wxu => 'WX berichten UIT gezet voor $_[0]',
378 addr => 'Dirección es ahora: $_[0]',
379 already => '$_[0] ya esta conectado',
380 anns => 'Anuncios activados $_[0]',
381 annu => 'Anuncios desactivados $_[0]',
382 annts => 'AnnTalk activados $_[0]',
383 anntu => 'AnnTalk desactivados $_[0]',
384 badnode1 => '$_[0] es ahora un nodo indeseado',
385 badnode2 => '$_[0] es ahora un nodo normal',
386 badnode3 => 'Lista de nodos indeseados:-',
387 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
388 bbs => 'Tu BBS es ahora \"$_[0]\"',
389 beepoff => 'Beeps desactivados',
390 beepon => 'Beeps activados',
391 call1 => 'Callsign lookup via $_[0]:',
392 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
393 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
394 conscript => 'no hay ningún script que se llame \"$_[0]\" en $main::root/connect',
395 confail => 'conexión con $_[0] fallida ($_[1])',
396 constart => 'conexión con $_[0] ha comenzado',
397 deluser =>'El usuario $_[0] ha sido borrado',
398 db1 => 'Esta base de datos está en $_[0]',
399 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
400 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
401 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
402 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
403 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
404 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
405 db8 => 'Base de datos $_[0] creada localmente',
406 db9 => 'Base de datos $_[0] borrada',
407 db10 => '$_[0] registros importados para $_[1]',
408 db11 => 'Petición enviada a $_[0], por favor espera...',
409 dfreq1 => 'Frecuencia inválida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
410 dir1 => 'No se encontró el mensage',
411 disc1 => 'Desconectado por $_[0]',
412 disc2 => '$_[0] desconectado',
413 disc3 => 'No Channel, but connection $_[0] disconnected',
414 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
416 dup => 'Lo siento, esto es un duplicado',
417 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
418 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
419 dx3 => 'El indicativo o la frecuencia es incorrecta',
420 dxs => 'DX Spots activado $_[0]',
421 dxu => 'DX Spots desactivado $_[0]',
422 e1 => 'Comando inválido',
423 e2 => 'Error: $_[0]',
424 e3 => '$_[0]: $_[1] no encontrado',
425 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
426 e5 => 'No permitido',
427 e6 => '*** No se ha especificado una estación ***',
428 e7 => 'indicativo $_[0] no visible en el cluster',
429 e8 => 'Se necesita un indicativo y algo de texto',
430 e9 => 'Se necesita al menos algo de texto',
431 e10 => '$_[0] no conectado en local',
432 e11 => 'Can\'t use $main:mycall as target',
433 e12 => 'Se necesita el indicativo del nodo',
434 e13 => '$_[0] no es un nodo',
435 e14 => 'El primer argumento debe de ser mumérico y > 0',
436 e15 => 'cualificador no válido \"$_[0]\"',
437 e16 => 'El fichero \"$_[0]\" ya existe',
438 e17 => 'Por favor no uses la palabra: @_ aqui',
439 e18 => 'No se puede conectar con $_[0] ($!)',
440 e19 => 'Caracter inválido en la linea',
441 e20 => 'señal $_[0] no reconocido',
442 e21 => '$_[0] no numérico',
443 e22 => '$_[0] no es un indicativo',
444 e23 => '$_[0] fuera de rango (ej: 0/30000)',
445 e24 => 'Lo siento, el acceso a internet no está habilitado',
446 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
447 e26 => 'Demasiados errores, serás desconectado',
448 e27 => '$_[0] no es un numero o un prefijo',
449 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
450 e29 => 'Necesitas password',
452 echoon => 'Habilitado eco',
453 echooff => 'Deshabilitado eco',
454 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
455 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
456 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
457 email => 'E-mail es ahora: $_[0]',
458 export1 => 'usa: export <msgno> <filename>',
459 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
460 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
461 filter1 => 'Filtro $_[0] actualizado para $_[1]',
462 filter2 => 'Necesito un valor para $_[0]',
463 filter3 => 'No hay filtros definidos para $_[0]',
464 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
465 filter5 => 'necesito algunos camandos para el filtro...',
466 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
467 grids => 'DX Grid está activado $_[0]',
468 gridu => 'DX Grid está desavtivado $_[0]',
469 illcall => 'Lo siento,$_[0] no es un indicativo válido',
470 hasha => '$_[0] ya existe en $_[1]',
471 hashb => '$_[0] añadido a $_[1]',
472 hashc => '$_[0] eliminado desde $_[1]',
473 hashd => '$_[0] no en $_[1]',
474 hashe => '$_[0] activado $_[1]',
475 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
476 helpe2 => 'No hay ayuda disponible en $_[0]',
477 heres => 'Estás presente $_[0]',
478 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
479 hereu => 'Estás ausente $_[0]',
480 homebbs => 'Tu BBS es ahora: $_[0]',
481 homenode => 'Tu Nodo habitual es ahora: $_[0]',
482 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
483 hnodee2 => 'Fallo al poner homenode en $_[0]',
484 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
485 init1 => 'enviando mensaje de inicialización a $_[0]',
486 iso => '$_[0] Aislado',
487 isou => '$_[0] en red',
488 isoc => '$_[0] creado y aislado',
489 isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero',
490 isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero',
491 isow => '$_[0] está aislado; unset/isolate $_[0] primero',
492 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
493 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
494 lang => 'El idioma es ahora $_[0]',
495 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
496 lange2 => 'fallo al poner idioma en $_[0]',
497 lh1 => '$main::data/hop_table.pl no existe',
498 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
499 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
500 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
501 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
502 lockout => '$_[0] Boloqueado',
503 lockoutc => '$_[0] Creado y bloqueado',
504 lockoutun => '$_[0] Desbloqueado',
505 lockoutuse => 'usa: sh/lockout <call>|ALL',
506 loginu => 'Usuario $_[0] conectado',
507 logoutu => 'Usuario $_[0] desconectado',
508 loginn => 'Nodo $_[0] conectado',
509 logoutn => 'Nodo $_[0] desconectado',
510 m1 => 'Introduce título (30 caracteres):',
511 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
512 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
513 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
514 m5 => 'Lo siento, se necesita un número de mensaje',
515 m6 => 'Reenviado a: $_[0]',
516 m7 => 'Título : $_[0]',
517 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
518 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
519 m10 => 'mensaje interrumpido',
520 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
521 m12 => 'mensaje nr $_[0] borrado',
522 m13 => 'mensaje nr $_[0] no encontrado',
523 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
524 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
525 m16 => 'Necesito un número de mensaje',
526 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
527 msg1 => 'Bulletin Messages Queued',
528 msg2 => 'Private Messages Queued',
529 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
530 msgu => 'usa: msg <cmd> <msgno> data...',
531 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
532 moon => 'QTH dd/mm/yyyy Salida Puesta',
533 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
534 mond => 'Monitorado deshabilitado',
535 mone => 'Monitorado habilitado',
536 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
537 namee2 => 'No se encuentra el usuario $_[0]!',
538 name => 'Tu nombre es ahora \"$_[0]\"',
539 nodea => '$_[0] fijado como nodo AK1A ',
540 nodeac => '$_[0] creado como nodo AK1A ',
541 nodeb => '$_[0] fijado como BBS',
542 nodebc => '$_[0] creado como BBS',
543 nodec => '$_[0] fijado como nodo CLX ',
544 nodecc => '$_[0] creado como nodo CLX ',
545 noder => '$_[0] fijado como nodo AR-Cluster ',
546 noderc => '$_[0] creado como nodo AR-Cluster ',
547 nodes => '$_[0] fijado como nodo DXSpider ',
548 nodesc => '$_[0] creado como nodo DXSpider ',
549 nodex => '$_[0] fijado como nodo DXNET ',
550 nodexc => '$_[0] creado como nodo DXNET ',
551 nodeu => '$_[0] es ahora un usuario',
552 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
553 notdone => 'NO se pudo hacer',
554 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
555 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
556 ok => 'Operación realizada',
557 outconn => 'Iniciando conexion con $_[0]',
558 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
559 pagelth => 'La longitud de las páginas es ahora $_[0]',
560 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
561 password => 'Password ajustado o cambiado para $_[0]',
562 pingo => 'Iniciado el ping a $_[0]',
563 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
564 pinge1 => 'No puedes enviarte un ping a ti mismo!',
565 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
566 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
567 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
568 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
569 priv => 'Nivel de privilegios en $_[0]',
570 prx => '$main::mycall >',
571 pw0 => 'Teclea el password antiguo: ',
572 pw1 => 'Teclea el password nuevo: ',
573 pw2 => 'Teclea otra vez el password nuevo: ',
574 pw3 => 'Password cambiado',
575 pw4 => 'Los passwords no coinciden, NO se han cambiado',
576 qll => 'Por favor introduce tu locator con set/location o set/qra',
577 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
578 qth => 'Tu QTH es ahora \"$_[0]\"',
579 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
580 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
581 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
582 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
583 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
584 read1 => 'Lo siento, no hay mensajes nuevos para ti',
585 read2 => 'Msg $_[0] no encontrado',
586 read3 => 'Msg $_[0] no disponible',
587 rec => '$_[0] registros',
588 reg => '$_[0] registrado',
589 regc => '$_[0] creado y registrado',
590 reginac => 'El registro no está activ (set/var \$main::regreq = 1 para activarlo)',
591 regun => '$_[0] borrado',
592 route => '$_[0] en $_[1] via $_[2]',
593 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
594 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
595 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
596 sat4 => 'Satélites disponibles:-',
597 satnf => 'Satélite $_[0] desconocido',
599 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
600 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
601 sethop3 => 'No hay hops definidos para $_[0]',
602 shutting => '$main::mycall shutting down...',
603 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
604 snode1 => 'Nodo Call Sort Version',
605 snode2 => '$_[0] $_[1] $_[2]',
606 snode3 => '$_[0] Indicativo desconocido',
607 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
608 sorry => 'Lo siento',
609 spf1 => 'spoof: creando nuevo usuario $_[0]',
610 stathf => 'Estadísticas de spots en HF de los últimos 31 dias',
611 stathft => 'Estadísticas de spots en HF de los últimos 31 dias para DXCC $_[0]',
612 statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias',
613 statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
614 statdx => 'Total DX Spots ultimos 31 dias',
615 sun => 'QTH dd/mm/yyyy Salida Puesta',
616 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
617 suser1 => 'usa: indicativo user_field_name value',
618 suser2 => 'Usuario $_[0] no encontrado',
619 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
620 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
621 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
622 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
623 time3 => '$_[0] $_[1]',
624 talks => 'Talk activado $_[0]',
625 talku => 'Talk desactivado $_[0]',
626 talkend => 'Finalizado modo talk contigo',
627 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
628 talknh => 'Lo siento $_[0] no est conectado en este momento',
629 talkprompt => 'Talk ($_[0])>',
630 talkstart => 'Iniciando modo talk contigo',
631 usernf => '*** User record for $_[0] no encontrado ***',
632 wwvs => 'WWV activado $_[0]',
633 wwvu => 'WWV desactivado $_[0]',
634 wxs => 'WX activado $_[0]',
635 wxu => 'WX desactivado $_[0]',
638 addr => 'Adresse gesetzt auf: $_[0]',
639 already => '$_[0] bereits connnected',
640 anns => 'Announce flag gesetzt auf $_[0]',
641 annu => 'Announce flag zurueckgesetzt auf $_[0]',
642 annts => 'AnnTalk flag gesetzt auf $_[0]',
643 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
644 badnode1 => '$_[0] ist nun ein bad node',
645 badnode2 => '$_[0] ist nun ein good node',
646 badnode3 => 'Liste der Bad Nodes:-',
647 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
648 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
649 beepoff => 'Beeps sind nun aus',
650 beepon => 'Beeps sind nun eingeschaltet',
651 call1 => 'Callsign lookup via $_[0]:',
652 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
653 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
654 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
655 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
656 constart => 'Verbindung zu $_[0] gestartet',
657 deluser => 'User $_[0] wurde geloescht',
658 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
659 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
660 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
661 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
662 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
663 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
664 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
665 db8 => 'Datenbank $_[0] lokal angelegt',
666 db9 => 'Datenbank $_[0] entfernt',
667 db10 => '$_[0] Datensaetze importiert in $_[1]',
668 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
669 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
670 dir1 => 'Keine Nachricht gefunden',
671 disc1 => 'Disconnected von $_[0]',
672 disc2 => 'Kanal $_[0] disconnected',
673 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
674 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
676 dup => 'Sorry, dies ist ein Duplikat',
677 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
678 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
679 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
680 dxs => 'DX Spots flag gesetzt auf $_[0]',
681 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
682 e1 => 'Ungueltiger Befehl',
683 e2 => 'Fehler: $_[0]',
684 e3 => '$_[0]: $_[1] nicht gefunden',
685 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
686 e5 => 'Nicht erlaubt',
687 e6 => '*** Keine Station angegeben ***',
688 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
689 e8 => 'Brauche ein Rufzeichen und etwas Text',
690 e9 => 'Brauche wenigstens etwas Text',
691 e10 => '$_[0] nicht lokal connected',
692 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
693 e12 => 'Brauche ein Node Rufzeichen',
694 e13 => '$_[0] ist kein Node',
695 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
696 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
697 e16 => 'Datei \"$_[0]\" existiert',
698 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
699 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
700 e19 => 'Ungueltiger Character in der Zeile',
701 e20 => 'Kuerzel $_[0] nicht erkannt',
702 e21 => '$_[0] nicht numerisch',
703 e22 => '$_[0] kein Rufzeichen',
704 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
705 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
707 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
708 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
709 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
710 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
711 e29 => 'Brauche eine Passwort',
712 echoon => 'Echo enabled',
713 echooff => 'Echo disabled',
714 echow => '*Echo ist im moment disabled, set/echo to enable',
715 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
716 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
717 email => 'E-mail Adresse gesetzt auf: $_[0]',
718 export1 => 'Gebrauch: export <msgno> <dateiname>',
719 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
720 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
721 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
722 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
723 filter3 => 'Keine Filter definiert fuer $_[0]',
724 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
725 filter5 => 'brauche ein paar Filter Kommandos...',
726 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
727 grids => 'DX Grid flag gesetzt auf $_[0]',
728 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
729 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
730 hasha => '$_[0] existiert bereits in $_[1]',
731 hashb => '$_[0] zugefuegt zu $_[1]',
732 hashc => '$_[0] entfernt von $_[1]',
733 hashd => '$_[0] nicht in $_[1]',
734 hashe => '$_[0] gesetzt auf $_[1]',
735 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
736 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
737 heres => 'Hier gesetzt auf $_[0]',
738 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
739 hereu => 'Here zurueckgesetzt auf $_[0]',
740 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
741 homenode => 'Heimat Node gesetzt auf: $_[0]',
742 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
743 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
744 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
745 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
746 iso => '$_[0] Isoliert',
747 isou => '$_[0] UnIsoliert',
748 isoc => '$_[0] erstellt und Isoliert',
749 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
750 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
751 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
752 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
753 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
754 lang => 'Sprache ist jetzt $_[0]',
755 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
756 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
757 lh1 => '$main::data/hop_table.pl existiert nicht',
758 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
759 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
760 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
761 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
762 lockout => '$_[0] ausgesperrt',
763 lockoutc => '$_[0] erstellt und ausgesperrt',
764 lockoutun => '$_[0] Aussperrung aufgehoben',
765 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
766 loginu => 'User $_[0] hat eingeloggt',
767 logoutu => 'User $_[0] hat ausgeloggt',
768 loginn => 'Node $_[0] hat eingeloggt',
769 logoutn => 'Node $_[0] hat ausgeloggt',
770 m1 => 'Subjekt eingeben (30 Zeichen):',
771 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
772 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
773 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
774 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
775 m6 => 'Reply to: $_[0]',
776 m7 => 'Subject : $_[0]',
777 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
778 m9 => 'Neue Nachricht(en) fuer Dich',
779 m10 => 'Nachricht abgebrochen',
780 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
781 m12 => 'Nachricht Nr. $_[0] geloescht',
782 m13 => 'Nachricht Nr. $_[0] fehlt',
783 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
784 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
785 m16 => 'Brauche eine Nachrichten Nummer',
786 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
787 msg1 => 'Bulletin Nachrichten aufgeschoben',
788 msg2 => 'Private Nachrichten aufgeschoben',
789 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
790 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
791 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
792 moon => 'Standort dd/mm/yyyy Rise Set',
793 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
794 mond => 'Ueberwachung Disabled',
795 mone => 'Ueberwachung Enabled',
796 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
797 namee2 => 'Kann User $_[0]nicht finden!',
798 name => 'Dein Name ist jetzt \"$_[0]\"',
799 nodea => '$_[0] gesetzt als AK1A style Node',
800 nodeac => '$_[0] erstellt als AK1A style Node',
801 nodeb => '$_[0] gesetzt als BBS',
802 nodebc => '$_[0] erstellt als BBS',
803 nodec => '$_[0] gesetzt als CLX style Node',
804 nodecc => '$_[0] erstellt als CLX style Node',
805 noder => '$_[0] gesetzt als AR-Cluster style Node',
806 noderc => '$_[0] erstellt als AR-Cluster style Node',
807 nodes => '$_[0] gesetzt als DXSpider style Node',
808 nodesc => '$_[0] erstellt als DXSpider style Node',
809 nodex => '$_[0] gesetzt als DXNET style Node',
810 nodexc => '$_[0] erstellt als DXNET style Node',
811 nodeu => '$_[0] zurueckgesetzt als ein User',
812 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
813 notdone => 'Nicht ausgefuehrt',
814 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
815 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
816 ok => 'Operation erfolgreich',
817 outconn => 'Outstanding connect to $_[0]',
818 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
819 pagelth => 'Seitenlaenge ist nun $_[0]',
820 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
821 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
822 passwordu => 'Passwort geloescht fuer $_[0]',
823 pingo => 'Ping Started to $_[0]',
824 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
825 pinge1 => 'Cannot ping yourself!',
826 pingint => 'Ping interval on $_[0] set to $_[1] secs',
827 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
828 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
829 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
830 priv => 'Priviligierten Level geaendert auf $_[0]',
831 prx => '$main::mycall >',
832 pw0 => 'Altes Passwort eingeben: ',
833 pw1 => 'Neues Passwort eingeben: ',
834 pw2 => 'Wiederhole neues Passwort: ',
835 pw3 => 'Passwort geaendert',
836 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
837 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
838 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
839 qth => 'Dein QTH ist nun \"$_[0]\"',
840 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
841 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
842 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
843 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
844 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
845 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
846 read2 => 'Msg $_[0] nicht gefunden',
847 read3 => 'Msg $_[0] nicht verfuegbar',
848 rec => '$_[0] records',
849 reg => '$_[0] registriert',
850 regc => '$_[0] erstellt und registriert',
851 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
852 regun => '$_[0] unregistriert',
853 route => '$_[0] auf $_[1] via $_[2]',
854 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
855 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
856 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
857 sat4 => 'Satelliten verfuegbar:-',
858 satnf => 'Satellit $_[0] unbekannt',
860 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
861 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
862 sethop3 => 'Keine hops gesetzt fuer $_[0]',
863 shutting => '$main::mycall shutting down...',
864 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
865 snode1 => 'Node Call Sort Version',
866 snode2 => '$_[0] $_[1] $_[2]',
867 snode3 => '$_[0] Unbekanntes Rufzeichen',
868 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
870 spf1 => 'spoof: erzeuge neuen User $_[0]',
871 stathf => 'HF DX Spot Stats, letzte 31 Tage',
872 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
873 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
874 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
875 statdx => 'Total DX Spots letzte 31 Tage',
876 sun => 'Location dd/mm/yyyy Rise Set',
877 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
878 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
879 suser2 => 'User $_[0] nicht gefunden',
880 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
881 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
882 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
883 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
884 time3 => '$_[0] $_[1]',
885 talks => 'Talk flag gesetzt auf $_[0]',
886 talku => 'Talk flag zurueckgesetzt auf $_[0]',
887 talkend => 'Beendet Talk zu Dir',
888 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
889 talknh => 'Sorry $_[0] ist im moment nicht online',
890 talkprompt => 'Talk ($_[0])>',
891 talkstart => 'Startet Talkmode zu Dir',
892 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
893 wwvs => 'WWV flag gesetzt auf $_[0]',
894 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
895 wxs => 'WX flag gesetzt auf $_[0]',
896 wxu => 'WX flag zurueckgesetzt auf $_[0]',
projects / spider.git / blob