3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 badnode1 => '$_[0] is now a bad node',
18 badnode2 => '$_[0] is now a good node',
19 badnode3 => 'List of Bad Nodes:-',
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
21 bbs => 'Your BBS Address is now \"$_[0]\"',
22 beepoff => 'Beeps are now off',
23 beepon => 'Beeps are now on',
24 call1 => 'Callsign lookup via $_[0]:',
25 conother => 'Sorry $_[0] you are connected on another port',
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster',
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
28 confail => 'connection to $_[0] failed ($_[1])',
29 constart => 'connection to $_[0] started',
30 disc1 => 'Disconnected by $_[0]',
31 disc2 => '$_[0] disconnected',
32 db1 => 'This database is hosted at $_[0]',
33 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
34 db3 => 'Sorry, database $_[0] doesn\'t exist here',
35 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
36 db5 => 'Accessing remote database on $_[0]...standby...',
37 db6 => 'Database $_[0] already exists, delete it first',
38 db7 => 'Database $_[0] created for remote node $_[1]',
39 db8 => 'Database $_[0] created locally',
40 db9 => 'Database $_[0] removed',
41 db10 => '$_[0] records imported into $_[1]',
42 db11 => 'Sending your request(s) to $_[0], please stand by...',
43 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
44 dup => 'Sorry, this is a duplicate',
45 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
46 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
47 dxs => 'DX Spots flag set on $_[0]',
48 dxu => 'DX Spots flag unset on $_[0]',
49 e1 => 'Invalid command',
51 e3 => '$_[0]: $_[1] not found',
52 e4 => 'Need at least a prefix or callsign',
54 e6 => '*** No station specified ***',
55 e7 => 'callsign $_[0] not visible on the cluster',
56 e8 => 'Need a callsign and some text',
57 e9 => 'Need at least some text',
58 e10 => '$_[0] not connected locally',
59 e11 => 'Can\'t use $main:mycall as target',
60 e12 => 'Need a node callsign',
61 e13 => '$_[0] is not a node',
62 e14 => 'First argument must be numeric and > 0',
63 e15 => 'invalid qualifier \"$_[0]\"',
64 e16 => 'File \"$_[0]\" exists',
65 e17 => 'Please don\'t use the words: @_ on here',
66 e18 => 'Cannot connect to $_[0] ($!)',
67 e19 => 'Invalid character in line',
68 e20 => 'token $_[0] not recognised',
69 e21 => '$_[0] not numeric',
70 e22 => '$_[0] not a callsign',
71 e23 => '$_[0] not a range (eg 0/30000)',
72 e24 => 'Sorry, Internet access is not enabled',
74 echoon => 'Echoing enabled',
75 echooff => 'Echoing disabled',
76 echow => '*Echoing is currently disabled, set/echo to enable',
77 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
78 emaila => 'Your E-Mail Address is now \"$_[0]\"',
79 email => 'E-mail address set to: $_[0]',
80 export1 => 'usage: export <msgno> <filename>',
81 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
82 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
83 filter1 => 'Filter $_[0] updated for $_[1]',
84 filter2 => 'Need a value for $_[0]',
85 filter3 => 'No filters defined for $_[0]',
86 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
87 filter5 => 'need some filter commands...',
88 filter6 => '$_[0]$_[1] Filter for $[2] not found',
89 grids => 'DX Grid flag set on $_[0]',
90 gridu => 'DX Grid flag unset on $_[0]',
91 helpe1 => 'Help system unavailable, tell sysop',
92 helpe2 => 'No help available on $_[0]',
93 heres => 'Here set on $_[0]',
94 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
95 hereu => 'Here unset on $_[0]',
96 homebbs => 'Home BBS set to: $_[0]',
97 homenode => 'Home Node set to: $_[0]',
98 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
99 hnodee2 => 'Failed to set homenode on $_[0]',
100 hnode => 'Your Homenode is now \"$_[0]\"',
101 init1 => 'sent initialisation message to $_[0]',
102 iso => '$_[0] Isolated',
103 isou => '$_[0] UnIsolated',
104 isoc => '$_[0] created and Isolated',
105 l1 => 'Sorry $_[0], you are already logged on on another channel',
106 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
107 lang => 'Language is now $_[0]',
108 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
109 lange2 => 'failed to set language on $_[0]',
110 lh1 => '$main::data/hop_table.pl doesn\'t exist',
111 loce1 => 'Please enter your location,, set/location <latitude longitude>',
112 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
113 loc => 'Your Lat/Long is now \"$_[0]\"',
114 lockout => '$_[0] Locked out',
115 lockoutc => '$_[0] Created and Locked out',
116 lockoutun => '$_[0] Unlocked',
117 loginu => 'User $_[0] has logged in',
118 logoutu => 'User $_[0] has logged out',
119 loginn => 'Node $_[0] has logged in',
120 logoutn => 'Node $_[0] has logged out',
121 m1 => 'Enter Subject (30 characters):',
122 m2 => 'Copy of msg $_[0] sent to $_[1]',
123 m3 => 'Sorry, $_[0] is an unacceptable TO address',
124 m4 => 'Sorry, can\'t access message $_[0]',
125 m5 => 'Sorry, I need a message number',
126 m6 => 'Reply to: $_[0]',
127 m7 => 'Subject : $_[0]',
128 m8 => 'Enter Message /EX to send or /ABORT to exit',
129 m9 => 'New mail has arrived for you',
130 m10 => 'Message Aborted',
131 m11 => 'Message no $_[0] saved and directed to $_[1]',
132 m12 => 'Message no $_[0] deleted',
133 m13 => 'Message no $_[0] missing',
134 m14 => 'Message no $_[0] marked as sent to $_[1]',
135 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
136 m16 => 'Need a Message number',
137 m17 => 'Sorry, cannot send messages in $_[0] mode',
138 msg1 => 'Bulletin Messages Queued',
139 msg2 => 'Private Messages Queued',
140 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
141 msgu => 'usage: msg <cmd> <msgno> data...',
142 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
143 moon => 'Location Rise Set Azim Elev RGain dB',
144 namee1 => 'Please enter your name, set/name <your name>',
145 namee2 => 'Can\'t find user $_[0]!',
146 name => 'Your name is now \"$_[0]\"',
147 nodea => '$_[0] set as AK1A style Node',
148 nodeac => '$_[0] created as AK1A style Node',
149 nodec => '$_[0] set as CLX style Node',
150 nodecc => '$_[0] created as CLX style Node',
151 noder => '$_[0] set as AR-Cluster style Node',
152 noderc => '$_[0] created as AR-Cluster style Node',
153 nodes => '$_[0] set as DXSpider style Node',
154 nodesc => '$_[0] created as DXSpider style Node',
155 nodex => '$_[0] set as DXNET style Node',
156 nodexc => '$_[0] created as DXNET style Node',
157 nodeu => '$_[0] set back as a User',
158 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
159 ok => 'Operation successful',
160 outconn => 'Outstanding connect to $_[0]',
161 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
162 pagelth => 'Page Length is now $_[0]',
163 passerr => 'Please use: SET/PASS <password> <callsign>',
164 password => 'Password set or changed for $_[0]',
165 pingo => 'Ping Started to $_[0]',
166 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
167 pinge1 => 'Cannot ping yourself!',
168 pingint => 'Ping interval on $_[0] set to $_[1] secs',
169 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
170 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
171 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
172 priv => 'Privilege level changed on $_[0]',
173 prx => '$main::mycall >',
174 qll => 'Please enter your location with set/location or set/qra',
175 qthe1 => 'Please enter your QTH, set/qth <your qth>',
176 qth => 'Your QTH is now \"$_[0]\"',
177 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
178 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
179 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
180 qra => 'Your QRA Locator is now \"$_[0]\"',
181 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
182 rec => '$_[0] records',
183 read1 => 'Sorry, no new messages for you',
184 read2 => 'Msg $_[0] not found',
185 read3 => 'Msg $_[0] not available',
186 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
187 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
188 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
189 sat4 => 'Satellites available:-',
190 satnf => 'Satellite $_[0] unknown',
192 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
193 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
194 sethop3 => 'No hops set for $_[0]',
195 shutting => '$main::mycall shutting down...',
196 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
197 snode1 => 'Node Call Sort Version',
198 snode2 => '$_[0] $_[1] $_[2]',
199 snode3 => '$_[0] Unknown Call',
200 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
202 spf1 => 'spoof: creating new user $_[0]',
203 sun => 'Location Rise Set Azim Elev',
204 suser1 => 'usage: callsign user_field_name value',
205 suser2 => 'User $_[0] not found',
206 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
207 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
208 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
209 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
210 time3 => '$_[0] $_[1]',
211 talks => 'Talk flag set on $_[0]',
212 talku => 'Talk flag unset on $_[0]',
213 talkend => 'Finished talking to you',
214 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
215 talkprompt => 'Talk ($_[0])>',
216 talkstart => 'Starting talking to you',
217 usernf => '*** User record for $_[0] not found ***',
218 wwvs => 'WWV flag set on $_[0]',
219 wwvu => 'WWV flag unset on $_[0]',
220 wxs => 'WX flag set on $_[0]',
221 wxu => 'WX flag unset on $_[0]',
224 addr => 'Addres gezet op: $_[0]',
225 already => '$_[0] reeds geconnect',
226 anns => 'Announce berichten AAN gezet voor $_[0]',
227 annu => 'Announce berichten UIT gezet voor $_[0]',
228 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
229 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
230 beepoff => 'De beep staat nu UIT',
231 beepon => 'De beep staat nu AAN',
232 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
233 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
234 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
235 confail => 'Verbinding met $_[0] mislukt ($_[1])',
236 constart => 'Verbinding met $_[0] gestart',
237 disc1 => 'Gedisconnect door $_[0]',
238 disc2 => '$_[0] gedisconnect',
239 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
240 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
241 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
242 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
243 e1 => 'Ongeldige opdracht',
245 e3 => '$_[0]: $_[1] niet gevonden',
246 e4 => 'Minimaal een prefix of een call nodig',
247 e5 => 'Niet toegestaan',
248 e6 => '*** Geen station gespecifiseerd ***',
249 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
250 e8 => 'Ik heb een call en tekst nodig',
251 e9 => 'Ik heb wel tekst nodig voor een announce!',
252 e10 => '$_[0] is niet lokaal verbonden',
253 e12 => 'Ik heb een node call nodig',
254 e13 => '$_[0] is geen node',
255 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
256 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
257 email => 'E-mail addres gezet op: $_[0]',
258 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
259 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
260 heres => 'Aanwezigheid AAN gezet voor $_[0]',
261 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
262 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
263 homebbs => 'Uw Home mailbox is nu $_[0]',
264 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
265 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
266 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
267 iso => '$_[0] is geisoleerd (Isolated)',
268 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
269 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
270 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
271 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
272 lh1 => '$main::data/hop_table.pl bestaat niet',
273 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
274 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
275 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
276 lockout => '$_[0] heeft geen toegang meer (Locked out)',
277 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
278 m2 => '$_[0] Informatie: $_[1]',
279 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
280 msgnew => 'Er is nieuwe post gearriveerd voor u',
281 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
282 namee2 => 'Gebruiker $_[0] niet te vinden!',
283 name => 'Uw naam is gezet op \"$_[0]\"',
284 node => '$_[0] gezet als een AK1A stijl DX-cluster',
285 nodeu => '$_[0] teruggezet naar gebruiker status',
286 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
287 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
288 ok => 'Opdracht succesvol uitgevoerd',
289 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
290 pagelth => 'Paginalengte gezet op ($_[0]) regels',
291 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
292 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
293 pingo => 'Ping gestart naar $_[0]',
294 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
295 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
296 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
297 priv => 'Privilege level gewijzigd op $_[0]',
298 prx => '$main::mycall >',
299 qll => 'Geef uw locator met set/location of set/qra',
300 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
301 qth => 'Uw QTH is nu \"$_[0]\"',
302 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
303 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
304 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
305 qra => 'Uw QRA Locator is nu \"$_[0]\"',
306 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
307 read1 => 'Sorry, geen berichten voor u',
308 read2 => 'Bericht $_[0] niet gevonden',
309 read3 => 'Bericht $_[0] niet beschikbaar',
310 shutting => '$main::mycall gaat QRT...',
311 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
312 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
313 talks => 'Talk berichten AAN gezet voor $_[0]',
314 talku => 'Talk berichten UIT gezet voor $_[0]',
315 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
316 wwvs => 'WWV berichten AAN gezet voor $_[0]',
317 wwvu => 'WWV berichten UIT gezet voor $_[0]',
318 wxs => 'WX berichten AAN gezet voor $_[0]',
319 wxu => 'WX berichten UIT gezet voor $_[0]',
projects / spider.git / blob