3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 annts => 'AnnTalk flag set on $_[0]',
18 anntu => 'AnnTalk flag unset on $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots flag set on $_[0]',
56 dxu => 'DX Spots flag unset on $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
87 echoon => 'Echoing enabled',
88 echooff => 'Echoing disabled',
89 echow => '*Echoing is currently disabled, set/echo to enable',
90 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
91 emaila => 'Your E-Mail Address is now \"$_[0]\"',
92 email => 'E-mail address set to: $_[0]',
93 export1 => 'usage: export <msgno> <filename>',
94 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
95 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
96 filter1 => 'Filter $_[0] updated for $_[1]',
97 filter2 => 'Unknown filter keyword $_[0]',
98 filter3 => 'No filters defined for $_[0]',
99 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
100 filter5 => 'need some filter commands...',
101 filter6 => '$_[0]$_[1] Filter for $[2] not found',
102 grids => 'DX Grid flag set on $_[0]',
103 gridu => 'DX Grid flag unset on $_[0]',
104 illcall => 'Sorry, $_[0] is an invalid callsign',
105 hasha => '$_[0] already exists in $_[1]',
106 hashb => '$_[0] added to $_[1]',
107 hashc => '$_[0] removed from $_[1]',
108 hashd => '$_[0] not in $_[1]',
109 hashe => '$_[0] set on $_[1]',
110 helpe1 => 'Help system unavailable, tell sysop',
111 helpe2 => 'No help available on $_[0]',
112 heres => 'Here set on $_[0]',
113 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
114 hereu => 'Here unset on $_[0]',
115 homebbs => 'Home BBS set to: $_[0]',
116 homenode => 'Home Node set to: $_[0]',
117 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
118 hnodee2 => 'Failed to set homenode on $_[0]',
119 hnode => 'Your Homenode is now \"$_[0]\"',
120 init1 => 'sent initialisation message to $_[0]',
121 iso => '$_[0] Isolated',
122 isou => '$_[0] UnIsolated',
123 isoc => '$_[0] created and Isolated',
124 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
125 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
126 isow => '$_[0] is isolated; unset/isolate $_[0] first',
127 l1 => 'Sorry $_[0], you are already logged on on another channel',
128 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
129 lang => 'Language is now $_[0]',
130 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
131 lange2 => 'failed to set language on $_[0]',
132 lh1 => '$main::data/hop_table.pl doesn\'t exist',
133 loce1 => 'Please enter your location,, set/location <latitude longitude>',
134 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
135 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
136 loc => 'Your Lat/Long is now \"$_[0]\"',
137 lockout => '$_[0] Locked out',
138 lockoutc => '$_[0] Created and Locked out',
139 lockoutun => '$_[0] Unlocked',
140 lockoutuse => 'usage: sh/lockout <call>|ALL',
141 loginu => 'User $_[0] has logged in',
142 logoutu => 'User $_[0] has logged out',
143 loginn => 'Node $_[0] has logged in',
144 logoutn => 'Node $_[0] has logged out',
145 m1 => 'Enter Subject (30 characters):',
146 m2 => 'Copy of msg $_[0] sent to $_[1]',
147 m3 => 'Sorry, $_[0] is an unacceptable TO address',
148 m4 => 'Sorry, can\'t access message $_[0]',
149 m5 => 'Sorry, I need a message number',
150 m6 => 'Reply to: $_[0]',
151 m7 => 'Subject : $_[0]',
152 m8 => 'Enter Message /EX to send or /ABORT to exit',
153 m9 => 'New mail has arrived for you',
154 m10 => 'Message Aborted',
155 m11 => 'Message no $_[0] saved and directed to $_[1]',
156 m12 => 'Message no $_[0] deleted',
157 m13 => 'Message no $_[0] missing',
158 m14 => 'Message no $_[0] marked as sent to $_[1]',
159 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
160 m16 => 'Need a Message number',
161 m17 => 'Sorry, cannot send messages in $_[0] mode',
162 msg1 => 'Bulletin Messages Queued',
163 msg2 => 'Private Messages Queued',
164 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
165 msgu => 'usage: msg <cmd> <msgno> data...',
166 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
167 moon => 'Location dd/mm/yyyy Rise Set',
168 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
169 mond => 'Monitoring Disabled',
170 mone => 'Monitoring Enabled',
171 namee1 => 'Please enter your name, set/name <your name>',
172 namee2 => 'Can\'t find user $_[0]!',
173 name => 'Your name is now \"$_[0]\"',
174 nodea => '$_[0] set as AK1A style Node',
175 nodeac => '$_[0] created as AK1A style Node',
176 nodeb => '$_[0] set as BBS',
177 nodebc => '$_[0] created as BBS',
178 nodec => '$_[0] set as CLX style Node',
179 nodecc => '$_[0] created as CLX style Node',
180 noder => '$_[0] set as AR-Cluster style Node',
181 noderc => '$_[0] created as AR-Cluster style Node',
182 nodes => '$_[0] set as DXSpider style Node',
183 nodesc => '$_[0] created as DXSpider style Node',
184 nodex => '$_[0] set as DXNET style Node',
185 nodexc => '$_[0] created as DXNET style Node',
186 nodeu => '$_[0] set back as a User',
187 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
188 notdone => 'NOT Done',
189 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
190 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
191 ok => 'Operation successful',
192 outconn => 'Outstanding connect to $_[0]',
193 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
194 pagelth => 'Page Length is now $_[0]',
195 passerr => 'Please use: SET/PASS <password> <callsign>',
196 password => 'Password set or changed for $_[0]',
197 pingo => 'Ping Started to $_[0]',
198 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
199 pinge1 => 'Cannot ping yourself!',
200 pingint => 'Ping interval on $_[0] set to $_[1] secs',
201 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
202 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
203 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
204 priv => 'Privilege level changed on $_[0]',
205 prx => '$main::mycall >',
206 pw0 => 'Enter old password: ',
207 pw1 => 'Enter new password: ',
208 pw2 => 'Re-enter new password: ',
209 pw3 => 'Password changed',
210 pw4 => 'Passwords differ, password NOT changed',
211 qll => 'Please enter your location with set/location or set/qra',
212 qthe1 => 'Please enter your QTH, set/qth <your qth>',
213 qth => 'Your QTH is now \"$_[0]\"',
214 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
215 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
216 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
217 qra => 'Your QRA Locator is now \"$_[0]\"',
218 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
219 read1 => 'Sorry, no new messages for you',
220 read2 => 'Msg $_[0] not found',
221 read3 => 'Msg $_[0] not available',
222 rec => '$_[0] records',
223 reg => '$_[0] registered',
224 regc => '$_[0] created and registered',
225 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
226 regun => '$_[0] unregistered',
227 route => '$_[0] on $_[1] via $_[2]',
228 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
229 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
230 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
231 sat4 => 'Satellites available:-',
232 satnf => 'Satellite $_[0] unknown',
234 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
235 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
236 sethop3 => 'No hops set for $_[0]',
237 shutting => '$main::mycall shutting down...',
238 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
239 snode1 => 'Node Call Sort Version',
240 snode2 => '$_[0] $_[1] $_[2]',
241 snode3 => '$_[0] Unknown Call',
242 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
244 spf1 => 'spoof: creating new user $_[0]',
245 stathf => 'HF DX Spot Stats, last 31 days',
246 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
247 statvhf => 'VHF+ DX Spot Stats, last 31 days',
248 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
249 statdx => 'Total DX Spots last 31 days',
250 sun => 'Location dd/mm/yyyy Rise Set',
251 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
252 suser1 => 'usage: callsign user_field_name value',
253 suser2 => 'User $_[0] not found',
254 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
255 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
256 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
257 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
258 time3 => '$_[0] $_[1]',
259 talks => 'Talk flag set on $_[0]',
260 talku => 'Talk flag unset on $_[0]',
261 talkend => 'Finished talking to you',
262 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
263 talknh => 'Sorry $_[0] is not online at the moment',
264 talkprompt => 'Talk ($_[0])>',
265 talkstart => 'Starting talking to you',
266 usernf => '*** User record for $_[0] not found ***',
267 wwvs => 'WWV flag set on $_[0]',
268 wwvu => 'WWV flag unset on $_[0]',
269 wxs => 'WX flag set on $_[0]',
270 wxu => 'WX flag unset on $_[0]',
273 addr => 'Addres gezet op: $_[0]',
274 already => '$_[0] reeds geconnect',
275 anns => 'Announce berichten AAN gezet voor $_[0]',
276 annu => 'Announce berichten UIT gezet voor $_[0]',
277 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
278 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
279 beepoff => 'De beep staat nu UIT',
280 beepon => 'De beep staat nu AAN',
281 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
282 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
283 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
284 confail => 'Verbinding met $_[0] mislukt ($_[1])',
285 constart => 'Verbinding met $_[0] gestart',
286 disc1 => 'Gedisconnect door $_[0]',
287 disc2 => '$_[0] gedisconnect',
288 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
289 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
290 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
291 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
292 e1 => 'Ongeldige opdracht',
294 e3 => '$_[0]: $_[1] niet gevonden',
295 e4 => 'Minimaal een prefix of een call nodig',
296 e5 => 'Niet toegestaan',
297 e6 => '*** Geen station gespecifiseerd ***',
298 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
299 e8 => 'Ik heb een call en tekst nodig',
300 e9 => 'Ik heb wel tekst nodig voor een announce!',
301 e10 => '$_[0] is niet lokaal verbonden',
302 e12 => 'Ik heb een node call nodig',
303 e13 => '$_[0] is geen node',
304 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
305 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
306 email => 'E-mail addres gezet op: $_[0]',
307 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
308 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
309 heres => 'Aanwezigheid AAN gezet voor $_[0]',
310 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
311 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
312 homebbs => 'Uw Home mailbox is nu $_[0]',
313 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
314 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
315 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
316 iso => '$_[0] is geisoleerd (Isolated)',
317 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
318 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
319 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
320 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
321 lh1 => '$main::data/hop_table.pl bestaat niet',
322 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
323 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
324 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
325 lockout => '$_[0] heeft geen toegang meer (Locked out)',
326 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
327 m2 => '$_[0] Informatie: $_[1]',
328 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
329 msgnew => 'Er is nieuwe post gearriveerd voor u',
330 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
331 namee2 => 'Gebruiker $_[0] niet te vinden!',
332 name => 'Uw naam is gezet op \"$_[0]\"',
333 node => '$_[0] gezet als een AK1A stijl DX-cluster',
334 nodeu => '$_[0] teruggezet naar gebruiker status',
335 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
336 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
337 ok => 'Opdracht succesvol uitgevoerd',
338 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
339 pagelth => 'Paginalengte gezet op ($_[0]) regels',
340 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
341 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
342 pingo => 'Ping gestart naar $_[0]',
343 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
344 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
345 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
346 priv => 'Privilege level gewijzigd op $_[0]',
347 prx => '$main::mycall >',
348 qll => 'Geef uw locator met set/location of set/qra',
349 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
350 qth => 'Uw QTH is nu \"$_[0]\"',
351 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
352 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
353 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
354 qra => 'Uw QRA Locator is nu \"$_[0]\"',
355 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
356 read1 => 'Sorry, geen berichten voor u',
357 read2 => 'Bericht $_[0] niet gevonden',
358 read3 => 'Bericht $_[0] niet beschikbaar',
359 shutting => '$main::mycall gaat QRT...',
360 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
361 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
362 talks => 'Talk berichten AAN gezet voor $_[0]',
363 talku => 'Talk berichten UIT gezet voor $_[0]',
364 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
365 wwvs => 'WWV berichten AAN gezet voor $_[0]',
366 wwvu => 'WWV berichten UIT gezet voor $_[0]',
367 wxs => 'WX berichten AAN gezet voor $_[0]',
368 wxu => 'WX berichten UIT gezet voor $_[0]',
375 addr => 'Dirección es ahora: $_[0]',
376 already => '$_[0] ya esta conectado',
377 anns => 'Anuncios activados $_[0]',
378 annu => 'Anuncios desactivados $_[0]',
379 annts => 'AnnTalk activados $_[0]',
380 anntu => 'AnnTalk desactivados $_[0]',
381 badnode1 => '$_[0] es ahora un nodo indeseado',
382 badnode2 => '$_[0] es ahora un nodo normal',
383 badnode3 => 'Lista de nodos indeseados:-',
384 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
385 bbs => 'Tu BBS es ahora \"$_[0]\"',
386 beepoff => 'Beeps desactivados',
387 beepon => 'Beeps activados',
388 call1 => 'Callsign lookup via $_[0]:',
389 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
390 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
391 conscript => 'no hay ningun script que se llame \"$_[0]\" en $main::root/connect',
392 confail => 'conexión con $_[0] fallida ($_[1])',
393 constart => 'conexión con $_[0] ha comenzado',
394 deluser =>'El usuario $_[0] ha sido borrado',
395 db1 => 'Esta base de datos está en $_[0]',
396 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
397 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
398 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
399 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
400 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
401 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
402 db8 => 'Base de datos $_[0] creada localmente',
403 db9 => 'Base de datos $_[0] borrada',
404 db10 => '$_[0] records imported into $_[1]',
405 db11 => 'Petición enviada a $_[0], por favor espera...',
406 dfreq1 => 'Frecuencia invalida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
407 disc1 => 'Desconectado por $_[0]',
408 disc2 => '$_[0] desconectado',
409 disc3 => 'No Channel, but connection $_[0] disconnected',
410 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
412 dup => 'Lo siento, esto es un duplicado',
413 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
414 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
415 dx3 => 'El indicativo o la frecuencia es incorrecta',
416 dxs => 'DX Spots activado $_[0]',
417 dxu => 'DX Spots desactivado $_[0]',
418 e1 => 'Comando inválido',
419 e2 => 'Error: $_[0]',
420 e3 => '$_[0]: $_[1] no encontrado',
421 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
422 e5 => 'No permitido',
423 e6 => '*** No se ha especificado una estación ***',
424 e7 => 'indicativo $_[0] no visible en el cluster',
425 e8 => 'Se necesita un indicativo y algo de texto',
426 e9 => 'Se necesita al menos algo de texto',
427 e10 => '$_[0] no conectado en local',
428 e11 => 'Can\'t use $main:mycall as target',
429 e12 => 'Se necesita el indicativo del nodo',
430 e13 => '$_[0] no es un nodo',
431 e14 => 'El primer argumento debe de ser mumérico y > 0',
432 e15 => 'cualificador no válido \"$_[0]\"',
433 e16 => 'El fichero \"$_[0]\" ya existe',
434 e17 => 'Por favor no uses la palabra: @_ aqui',
435 e18 => 'No se puede conectar con $_[0] ($!)',
436 e19 => 'Caracter inválido en la linea',
437 e20 => 'señal $_[0] no reconocido',
438 e21 => '$_[0] no numérico',
439 e22 => '$_[0] no es un indicativo',
440 e23 => '$_[0] fuera de rango (ej: 0/30000)',
441 e24 => 'Lo siento, el acceso a internet no está habilitado',
442 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
443 e26 => 'Demasiados errores, seras desconectado',
444 e27 => '$_[0] no es un numero o un prefijo',
445 echoon => 'Habilitado eco',
446 echooff => 'Deshabilitado eco',
447 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
448 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
449 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
450 email => 'E-mail es ahora: $_[0]',
451 export1 => 'usa: export <msgno> <filename>',
452 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
453 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
454 filter1 => 'Filtro $_[0] actualizado para $_[1]',
455 filter2 => 'Necesito un valor para $_[0]',
456 filter3 => 'No hay filtros definidos para $_[0]',
457 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
458 filter5 => 'necesito algunos camandos para el filtro...',
459 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
460 grids => 'DX Grid está activado $_[0]',
461 gridu => 'DX Grid está desavtivado $_[0]',
462 illcall => 'Lo siento,$_[0] no es un indicativo valido',
463 hasha => '$_[0] ya existe en $_[1]',
464 hashb => '$_[0] añadido a $_[1]',
465 hashc => '$_[0] eliminado desde $_[1]',
466 hashd => '$_[0] no en $_[1]',
467 hashe => '$_[0] activado $_[1]',
468 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
469 helpe2 => 'No hay ayuda disponible en $_[0]',
470 heres => 'Estas presente $_[0]',
471 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
472 hereu => 'Estas ausente $_[0]',
473 homebbs => 'Tu BBS es ahora: $_[0]',
474 homenode => 'Tu Nodo habitual es ahora: $_[0]',
475 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
476 hnodee2 => 'Fallo al poner homenode en $_[0]',
477 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
478 init1 => 'enviando mensaje de inicialización a $_[0]',
479 iso => '$_[0] Aislado',
480 isou => '$_[0] en red',
481 isoc => '$_[0] creado y aislado',
482 isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero',
483 isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero',
484 isow => '$_[0] esta aislado; unset/isolate $_[0] primero',
485 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
486 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
487 lang => 'El idioma es ahora $_[0]',
488 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
489 lange2 => 'fallo al poner idioma en $_[0]',
490 lh1 => '$main::data/hop_table.pl no existe',
491 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
492 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
493 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
494 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
495 lockout => '$_[0] Boloqueado',
496 lockoutc => '$_[0] Creado y bloqueado',
497 lockoutun => '$_[0] Desbloqueado',
498 loginu => 'Usuario $_[0] conectado',
499 logoutu => 'Usuario $_[0] desconectado',
500 loginn => 'Nodo $_[0] conectado',
501 logoutn => 'Nodo $_[0] desconectado',
502 m1 => 'Introduce título (30 caracteres):',
503 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
504 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
505 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
506 m5 => 'Lo siento, se necesita un número de mensaje',
507 m6 => 'Reenviado a: $_[0]',
508 m7 => 'Título : $_[0]',
509 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
510 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
511 m10 => 'mensaje interrumpido',
512 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
513 m12 => 'mensaje nr $_[0] borrado',
514 m13 => 'mensaje nr $_[0] no encontrado',
515 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
516 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
517 m16 => 'Necesito un número de mensaje',
518 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
519 msg1 => 'Bulletin Messages Queued',
520 msg2 => 'Private Messages Queued',
521 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
522 msgu => 'usa: msg <cmd> <msgno> data...',
523 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
524 moon => 'QTH dd/mm/yyyy Salida Puesta',
525 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
526 mond => 'Monitorado deshabilitado',
527 mone => 'Monitorado habilitado',
528 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
529 namee2 => 'No se encuentra el usuario $_[0]!',
530 name => 'Tu nombre es ahora \"$_[0]\"',
531 nodea => '$_[0] fijado como nodo AK1A ',
532 nodeac => '$_[0] creado como nodo AK1A ',
533 nodeb => '$_[0] fijado como BBS',
534 nodebc => '$_[0] creado como BBS',
535 nodec => '$_[0] fijado como nodo CLX ',
536 nodecc => '$_[0] creado como nodo CLX ',
537 noder => '$_[0] fijado como nodo AR-Cluster ',
538 noderc => '$_[0] creado como nodo AR-Cluster ',
539 nodes => '$_[0] fijado como nodo DXSpider ',
540 nodesc => '$_[0] creado como nodo DXSpider ',
541 nodex => '$_[0] fijado como nodo DXNET ',
542 nodexc => '$_[0] creado como nodo DXNET ',
543 nodeu => '$_[0] es ahora un usuario',
544 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
545 notdone => 'NO se pudo hacer',
546 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
547 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
548 ok => 'Operación realizada',
549 outconn => 'Iniciando conexion con $_[0]',
550 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
551 pagelth => 'La longitud de las páginas es ahora $_[0]',
552 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
553 password => 'Password ajustado o cambiado para $_[0]',
554 pingo => 'Iniciado el ping a $_[0]',
555 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
556 pinge1 => 'No puedes enviarte un ping a ti mismo!',
557 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
558 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
559 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
560 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
561 priv => 'Nivel de privilegios en $_[0]',
562 prx => '$main::mycall >',
563 qll => 'Por favor introduce tu locator con set/location o set/qra',
564 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
565 qth => 'Tu QTH es ahora \"$_[0]\"',
566 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
567 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
568 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
569 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
570 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
571 rec => '$_[0] records',
572 read1 => 'Lo siento, no hay mensajes nuevos para ti',
573 read2 => 'Msg $_[0] no encontrado',
574 read3 => 'Msg $_[0] no disponible',
575 route => '$_[0] en $_[1] via $_[2]',
576 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
577 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
578 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
579 sat4 => 'Satélites disponibles:-',
580 satnf => 'Satélite $_[0] desconocido',
582 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
583 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
584 sethop3 => 'No hay hops definidos para $_[0]',
585 shutting => '$main::mycall shutting down...',
586 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
587 snode1 => 'Nodo Call Sort Version',
588 snode2 => '$_[0] $_[1] $_[2]',
589 snode3 => '$_[0] Indicativo desconocido',
590 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
591 sorry => 'Lo siento',
592 spf1 => 'spoof: creando nuevo usuario $_[0]',
593 stathf => 'HF DX Spot Stats, ultimos 31 dias',
594 stathft => 'HF DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
595 statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias',
596 statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
597 statdx => 'Total DX Spots ultimos 31 dias',
598 sun => 'QTH dd/mm/yyyy Salida Puesta',
599 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
600 suser1 => 'usa: indicativo user_field_name value',
601 suser2 => 'Usuario $_[0] no encontrado',
602 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
603 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
604 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
605 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
606 time3 => '$_[0] $_[1]',
607 talks => 'Talk activado $_[0]',
608 talku => 'Talk desactivado $_[0]',
609 talkend => 'Finalizado modo talk contigo',
610 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
611 talkprompt => 'Talk ($_[0])>',
612 talkstart => 'Iniciando modo talk contigo',
613 usernf => '*** User record for $_[0] no encontrado ***',
614 wwvs => 'WWV activado $_[0]',
615 wwvu => 'WWV desactivado $_[0]',
616 wxs => 'WX activado $_[0]',
617 wxu => 'WX desactivado $_[0]',
projects / spider.git / blob