3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announces enabled for $_[0]',
16 annu => 'Announces disabled for $_[0]',
17 annts => 'AnnTalk enabled for $_[0]',
18 anntu => 'AnnTalk disabled for $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dupspot => 'Sorry, this is a duplicate (wait a minute and try again)',
53 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
54 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
55 dx3 => 'The callsign or frequency is invalid',
56 dxs => 'DX Spots enabled for $_[0]',
57 dxu => 'DX Spots disabled for $_[0]',
58 e1 => 'Invalid command',
60 e3 => '$_[0]: $_[1] not found',
61 e4 => 'Need at least a prefix or callsign',
63 e6 => '*** No station specified ***',
64 e7 => 'callsign $_[0] not visible on the cluster',
65 e8 => 'Need a callsign and some text',
66 e9 => 'Need at least some text',
67 e10 => '$_[0] not connected locally',
68 e11 => 'Can\'t use $main:mycall as target',
69 e12 => 'Need a node callsign',
70 e13 => '$_[0] is not a node',
71 e14 => 'First argument must be numeric and > 0',
72 e15 => 'invalid qualifier \"$_[0]\"',
73 e16 => 'File \"$_[0]\" exists',
74 e17 => 'Please don\'t use the words: @_ on here',
75 e18 => 'Cannot connect to $_[0] ($!)',
76 e19 => 'Invalid character in line',
77 e20 => 'token $_[0] not recognised',
78 e21 => '$_[0] not numeric',
79 e22 => '$_[0] not a callsign',
80 e23 => '$_[0] not a range (eg 0/30000)',
81 e24 => 'Sorry, Internet access is not enabled',
82 e25 => 'Sorry the value must be between $_[0] and $_[1]',
83 e26 => 'Too many concurrent errors, you are being disconnected',
84 e27 => '$_[0] not a numeric or a callsign prefix',
85 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
86 e29 => 'Need a password',
87 e30 => 'Cannot Open $_[0] $!',
88 e31 => '$_[0] is not a user',
89 e32 => 'Need a passphrase',
91 echoon => 'Echoing enabled',
92 echooff => 'Echoing disabled',
93 echow => '*Echoing is currently disabled, set/echo to enable',
94 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
95 emaila => 'Your E-Mail Address is now \"$_[0]\"',
96 email => 'E-mail address set to: $_[0]',
97 export1 => 'usage: export <msgno> <filename>',
98 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
99 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
100 filter1 => 'Filter $_[0] updated for $_[1]',
101 filter2 => 'Unknown filter keyword $_[0]',
102 filter3 => 'No filters defined for $_[0]',
103 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
104 filter5 => 'need some filter commands...',
105 filter6 => '$_[0]$_[1] Filter for $[2] not found',
106 grids => 'DX Grid enabled for $_[0]',
107 gridu => 'DX Grid disabled for $_[0]',
108 illcall => 'Sorry, $_[0] is an invalid callsign',
109 hasha => '$_[0] already exists in $_[1]',
110 hashb => '$_[0] added to $_[1]',
111 hashc => '$_[0] removed from $_[1]',
112 hashd => '$_[0] not in $_[1]',
113 hashe => '$_[0] set on $_[1]',
114 helpe1 => 'Help system unavailable, tell sysop',
115 helpe2 => 'No help available on $_[0]',
116 heres => 'Here set on $_[0]',
117 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
118 hereu => 'Here unset on $_[0]',
119 homebbs => 'Home BBS set to: $_[0]',
120 homenode => 'Home Node set to: $_[0]',
121 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
122 hnodee2 => 'Failed to set homenode on $_[0]',
123 hnode => 'Your Homenode is now \"$_[0]\"',
124 init1 => 'sent initialisation message to $_[0]',
125 iso => '$_[0] Isolated',
126 isou => '$_[0] UnIsolated',
127 isoc => '$_[0] created and Isolated',
128 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
129 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
130 isow => '$_[0] is isolated; unset/isolate $_[0] first',
131 l1 => 'Sorry $_[0], you are already logged on on another channel',
132 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
133 lang => 'Language is now English',
134 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
135 lange2 => 'failed to set language on $_[0]',
136 lh1 => '$main::data/hop_table.pl doesn\'t exist',
137 loce1 => 'Please enter your location,, set/location <latitude longitude>',
138 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
139 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
140 loc => 'Your Lat/Long is now \"$_[0]\"',
141 lockout => '$_[0] Locked out',
142 lockoutc => '$_[0] Created and Locked out',
143 lockoutun => '$_[0] Unlocked',
144 lockoutuse => 'usage: sh/lockout <call>|ALL',
145 loginu => 'User $_[0] has logged in',
146 logoutu => 'User $_[0] has logged out',
147 loginn => 'Node $_[0] has logged in',
148 logoutn => 'Node $_[0] has logged out',
149 m1 => 'Enter Subject (30 characters):',
150 m2 => 'Copy of msg $_[0] sent to $_[1]',
151 m3 => 'Sorry, $_[0] is an unacceptable TO address',
152 m4 => 'Sorry, can\'t access message $_[0]',
153 m5 => 'Sorry, I need a message number',
154 m6 => 'Reply to: $_[0]',
155 m7 => 'Subject : $_[0]',
156 m8 => 'Enter Message /EX to send or /ABORT to exit',
157 m9 => 'New mail has arrived for you',
158 m10 => 'Message Aborted',
159 m11 => 'Message no $_[0] saved and directed to $_[1]',
160 m12 => 'Message no $_[0] deleted',
161 m13 => 'Message no $_[0] missing',
162 m14 => 'Message no $_[0] marked as sent to $_[1]',
163 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
164 m16 => 'Need a Message number',
165 m17 => 'Sorry, cannot send messages in $_[0] mode',
166 msg1 => 'Bulletin Messages Queued',
167 msg2 => 'Private Messages Queued',
168 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
169 msgu => 'usage: msg <cmd> <msgno> data...',
170 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
171 moon => 'Location dd/mm/yyyy Rise Set',
172 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
173 mond => 'Monitoring Disabled',
174 mone => 'Monitoring Enabled',
175 namee1 => 'Please enter your name, set/name <your name>',
176 namee2 => 'Can\'t find user $_[0]!',
177 name => 'Your name is now \"$_[0]\"',
178 nodea => '$_[0] set as AK1A style Node',
179 nodeac => '$_[0] created as AK1A style Node',
180 nodeb => '$_[0] set as BBS',
181 nodebc => '$_[0] created as BBS',
182 nodec => '$_[0] set as CLX style Node',
183 nodecc => '$_[0] created as CLX style Node',
184 noder => '$_[0] set as AR-Cluster style Node',
185 noderc => '$_[0] created as AR-Cluster style Node',
186 nodes => '$_[0] set as DXSpider style Node',
187 nodesc => '$_[0] created as DXSpider style Node',
188 nodex => '$_[0] set as DXNET style Node',
189 nodexc => '$_[0] created as DXNET style Node',
190 nodeu => '$_[0] set back as a User',
191 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
192 notdone => 'NOT Done',
193 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
194 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
195 ok => 'Operation successful',
196 outconn => 'Outstanding connect to $_[0]',
197 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
198 pagelth => 'Page Length is now $_[0]',
199 passerr => 'Please use: SET/PASS <password> <callsign>',
200 passphrase => 'Passphrase set or changed for $_[0]',
201 passphraseu => 'Passphrase removed for $_[0]',
202 password => 'Password set or changed for $_[0]',
203 passwordu => 'Password removed for $_[0]',
204 pc90s => 'PC90 enabled for $_[0]',
205 pc90u => 'PC90 disabled $_[0]',
206 pingo => 'Ping Started to $_[0]',
207 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
208 pinge1 => 'Cannot ping yourself!',
209 pingint => 'Ping interval on $_[0] set to $_[1] secs',
210 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
211 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
212 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
213 prs => 'Prompt now set to \"$_[0]\"',
214 pru => 'Prompt now set back to default',
215 priv => 'Privilege level changed on $_[0]',
216 prx => '$main::mycall >',
217 pw0 => 'Enter old password: ',
218 pw1 => 'Enter new password: ',
219 pw2 => 'Re-enter new password: ',
220 pw3 => 'Password changed',
221 pw4 => 'Passwords differ, password NOT changed',
222 qll => 'Please enter your location with set/location or set/qra',
223 qthe1 => 'Please enter your QTH, set/qth <your qth>',
224 qth => 'Your QTH is now \"$_[0]\"',
225 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
226 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
227 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
228 qra => 'Your QRA Locator is now \"$_[0]\"',
229 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
230 read1 => 'Sorry, no new messages for you',
231 read2 => 'Msg $_[0] not found',
232 read3 => 'Msg $_[0] not available',
233 rec => '$_[0] records',
234 reg => '$_[0] registered',
235 regc => '$_[0] created and registered',
236 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
237 regun => '$_[0] unregistered',
238 route => '$_[0] on $_[1] via $_[2]',
239 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
240 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
241 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
242 sat4 => 'Satellites available/Age of Keps (days):-',
243 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
244 satnf => 'Satellite $_[0] unknown',
246 set => '$_[0] enabled for $_[1]',
247 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
248 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
249 sethop3 => 'No hops set for $_[0]',
250 shu => '\"SHU\" is not enough! you need to type at least \"SHUT\" to shutdown the node',
251 shutting => '$main::mycall shutting down...',
252 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
253 snode1 => 'Node Call Sort Version',
254 snode2 => '$_[0] $_[1] $_[2]',
255 snode3 => '$_[0] Unknown Call',
256 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
258 spf1 => 'spoof: creating new user $_[0]',
259 stathf => 'HF DX Spot Stats, last 31 days from $_[0]',
260 stathft => 'HF DX Spot Stats, last 31 days from $_[1] for DXCC $_[0]',
261 statvhf => 'VHF+ DX Spot Stats, last 31 days from $_[0]',
262 statvhft => 'VHF+ DX Spot Stats, last 31 days from $_[1] for DXCC $_[0]',
263 statdx => 'Total DX Spots last 31 days',
264 sun => 'Location dd/mm/yyyy Rise Set',
265 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
266 susdb1 => 'usage: callsign state city',
267 susdb2 => 'USDB $_[0] was $_[1], $_[2]',
268 susdb3 => 'USDB $_[0] now $_[1], $_[2]',
269 susdb4 => 'USDB $_[0] deleted',
270 suser1 => 'usage: callsign user_field_name value',
271 suser2 => 'User $_[0] not found',
272 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
273 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
274 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
275 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
276 time3 => '$_[0] $_[1]',
277 talks => 'Talk enabled for $_[0]',
278 talku => 'Talk disabled for $_[0]',
279 talkend => 'Finished talking to you',
280 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
281 talknh => 'Sorry $_[0] is not online at the moment',
282 talkprompt => 'Talk ($_[0])>',
283 talkstart => 'Starting talking to you',
284 unset => '$_[0] disabled for $_[1]',
285 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
286 unsethop2 => 'hops unset on $_[1] for $_[0]',
287 usernf => '*** User record for $_[0] not found ***',
288 wpc16s => 'Want PC16 enabled for $_[0]',
289 wpc16u => 'Want PC16 disabled for $_[0]',
290 wspc16s => 'Send PC16 enabled for $_[0]',
291 wspc16u => 'Send PC16 disabled for $_[0]',
292 wcy1 => '$_[0] is missing or out of range',
293 wcy2 => 'Duplicate WCY',
294 wcys => 'WCY enabled for $_[0]',
295 wcyu => 'WCY disabled for $_[0]',
296 wwv1 => '$_[0] is missing or out of range',
297 wwv2 => 'Duplicate WWV',
298 wwvs => 'WWV enabled for $_[0]',
299 wwvu => 'WWV disabled $_[0]',
300 wxs => 'WX enabled for $_[0]',
301 wxu => 'WX disabled for $_[0]',
304 addr => 'Addres gezet op: $_[0]',
305 already => '$_[0] reeds geconnect',
306 anns => 'Announce berichten AAN gezet voor $_[0]',
307 annu => 'Announce berichten UIT gezet voor $_[0]',
308 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
309 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
310 beepoff => 'De beep staat nu UIT',
311 beepon => 'De beep staat nu AAN',
312 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
313 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
314 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
315 confail => 'Verbinding met $_[0] mislukt ($_[1])',
316 constart => 'Verbinding met $_[0] gestart',
317 disc1 => 'Gedisconnect door $_[0]',
318 disc2 => '$_[0] gedisconnect',
319 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
320 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
321 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
322 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
323 e1 => 'Ongeldige opdracht',
325 e3 => '$_[0]: $_[1] niet gevonden',
326 e4 => 'Minimaal een prefix of een call nodig',
327 e5 => 'Niet toegestaan',
328 e6 => '*** Geen station gespecifiseerd ***',
329 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
330 e8 => 'Ik heb een call en tekst nodig',
331 e9 => 'Ik heb wel tekst nodig voor een announce!',
332 e10 => '$_[0] is niet lokaal verbonden',
333 e12 => 'Ik heb een node call nodig',
334 e13 => '$_[0] is geen node',
335 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
336 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
337 email => 'E-mail addres gezet op: $_[0]',
338 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
339 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
340 heres => 'Aanwezigheid AAN gezet voor $_[0]',
341 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
342 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
343 homebbs => 'Uw Home mailbox is nu $_[0]',
344 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
345 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
346 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
347 iso => '$_[0] is geisoleerd (Isolated)',
348 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
349 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
350 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
351 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
352 lang => 'De taal zijn nu Nederlandse',
353 lh1 => '$main::data/hop_table.pl bestaat niet',
354 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
355 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
356 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
357 lockout => '$_[0] heeft geen toegang meer (Locked out)',
358 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
359 m2 => '$_[0] Informatie: $_[1]',
360 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
361 msgnew => 'Er is nieuwe post gearriveerd voor u',
362 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
363 namee2 => 'Gebruiker $_[0] niet te vinden!',
364 name => 'Uw naam is gezet op \"$_[0]\"',
365 node => '$_[0] gezet als een AK1A stijl DX-cluster',
366 nodeu => '$_[0] teruggezet naar gebruiker status',
367 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
368 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
369 ok => 'Opdracht succesvol uitgevoerd',
370 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
371 pagelth => 'Paginalengte gezet op ($_[0]) regels',
372 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
373 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
374 pingo => 'Ping gestart naar $_[0]',
375 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
376 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
377 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
378 priv => 'Privilege level gewijzigd op $_[0]',
379 prx => '$main::mycall >',
380 qll => 'Geef uw locator met set/location of set/qra',
381 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
382 qth => 'Uw QTH is nu \"$_[0]\"',
383 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
384 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
385 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
386 qra => 'Uw QRA Locator is nu \"$_[0]\"',
387 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
388 read1 => 'Sorry, geen berichten voor u',
389 read2 => 'Bericht $_[0] niet gevonden',
390 read3 => 'Bericht $_[0] niet beschikbaar',
391 shutting => '$main::mycall gaat QRT...',
392 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
393 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
394 talks => 'Talk berichten AAN gezet voor $_[0]',
395 talku => 'Talk berichten UIT gezet voor $_[0]',
396 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
397 wwvs => 'WWV berichten AAN gezet voor $_[0]',
398 wwvu => 'WWV berichten UIT gezet voor $_[0]',
399 wxs => 'WX berichten AAN gezet voor $_[0]',
400 wxu => 'WX berichten UIT gezet voor $_[0]',
405 addr => 'La dirección es ahora: $_[0]',
406 already => '$_[0] ya está conectado',
407 anns => 'Activada la recepción de anuncios para $_[0]',
408 annu => 'Desactivada la recepción de anuncios para $_[0]',
409 annts => 'Modo AnnTalk activado para $_[0]',
410 anntu => 'Modo AnnTalk desactivado para $_[0]',
411 badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
412 badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
413 badnode3 => 'Lista de nodos rechazados:',
414 bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
415 bbs => 'Tu BBS es ahora \"$_[0]\"',
416 beepoff => 'Avisos sonoros desactivados',
417 beepon => 'Avisos sonoros activados',
418 call1 => 'Se encontró el indicativo vía $_[0]:',
419 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
420 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
421 conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
422 confail => 'La conexión con $_[0] ha fallado ($_[1])',
423 constart => 'Se inicia la conexión a $_[0]',
424 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
425 db1 => 'Esta base de datos está en $_[0]',
426 db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
427 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
428 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
429 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
430 db6 => 'La base de datos $_[0] ya existe, bórrala primero',
431 db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
432 db8 => 'Base de datos $_[0] creada localmente',
433 db9 => 'La base de datos $_[0] ha sido eliminada',
434 db10 => '$_[0] registros importados para la base de datos $_[1]',
435 db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
436 dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
437 dir1 => 'No hay mensajes nuevos',
438 disc1 => 'Desconectado por $_[0]',
439 disc2 => 'Canal $_[0] desconectado',
440 disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
441 disc4 => 'No existía el canal o la conexión, $_[0] se elimina',
443 dup => 'Lo siento, esto es un duplicado',
444 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
445 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
446 dx3 => 'El indicativo o la frecuencia es incorrecta',
447 dxs => 'Activada la recepción de spots de DX para $_[0]',
448 dxu => 'Desactivada la recepción de spots de DX para $_[0]',
449 e1 => 'Este comando no es válido',
450 e2 => 'Error: $_[0]',
451 e3 => '$_[0]: $_[1] no encontrado',
452 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
453 e5 => 'No estás autorizado',
454 e6 => '*** No se ha especificado una estación ***',
455 e7 => 'El indicativo $_[0] no es visible en el cluster',
456 e8 => 'Se necesita un indicativo y algún texto',
457 e9 => 'Se necesita al menos algún texto',
458 e10 => '$_[0] no se encuentra conectado',
459 e11 => 'No puedes usar tu propio $main:mycall como destino',
460 e12 => 'Se necesita el indicativo del nodo',
461 e13 => '$_[0] no es un nodo',
462 e14 => 'El primer argumento debe de ser numérico y > 0',
463 e15 => 'calificador no válido \"$_[0]\"',
464 e16 => 'El fichero \"$_[0]\" ya existe',
465 e17 => 'Por favor no uses la palabra: @_ aquí',
466 e18 => 'No se puede conectar con $_[0] ($!)',
467 e19 => 'Carácter no válido en la línea',
468 e20 => 'Símbolo $_[0] no reconocido',
469 e21 => '$_[0] no es numérico',
470 e22 => '$_[0] no es un indicativo',
471 e23 => '$_[0] fuera de rango (ej: 0/30000)',
472 e24 => 'Lo siento, el acceso a internet no está habilitado',
473 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
474 e26 => 'Demasiados errores, serás desconectado',
475 e27 => '$_[0] no es un numero o un prefijo',
476 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
477 e29 => 'Necesitas password',
478 echoon => 'Eco local activado',
479 echooff => 'Eco local desactivado',
480 echow => '*Eco local desactivado, set/echo para activarlo',
481 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
482 emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
483 email => 'La dirección E-mail es ahora: $_[0]',
484 export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
485 export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
486 export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
487 filter1 => 'Filtro $_[0] actualizado para $_[1]',
488 filter2 => 'Es necesario un valor para $_[0]',
489 filter3 => 'No hay filtros definidos para $_[0]',
490 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
491 filter5 => 'Se necesitan algunos comandos para el filtro...',
492 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
493 grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
494 gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
495 illcall => 'Lo siento, $_[0] no es un indicativo válido',
496 hasha => '$_[0] ya existe en $_[1]',
497 hashb => '$_[0] añadido a $_[1]',
498 hashc => '$_[0] eliminado desde $_[1]',
499 hashd => '$_[0] no en $_[1]',
500 hashe => '$_[0] activado $_[1]',
501 helpe1 => 'La ayuda no está disponible, comunícaselo al sysop',
502 helpe2 => 'No hay ayuda disponible para $_[0]',
503 heres => 'Se informa a la red: $_[0] está presente',
504 heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
505 hereu => 'Se informa a la red: $_[0] está ausente',
506 homebbs => 'Tu BBS es ahora: $_[0]',
507 homenode => 'Tu cluster habitual es ahora: $_[0]',
508 hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
509 hnodee2 => 'Error al definir homenode en $_[0]',
510 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
511 init1 => 'Enviado mensaje de inicialización a $_[0]',
512 iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
513 isou => 'El cluster $_[0] se pone en modo activo',
514 isoc => '$_[0] creado y definido como pasivo (Aislado)',
515 isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
516 isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
517 isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
518 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
519 l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
520 lang => 'El idioma es ahora Español',
521 lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
522 lange2 => 'fallo al seleccionar idioma en $_[0]',
523 lh1 => '$main::data/hop_table.pl no existe',
524 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
525 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
526 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
527 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
528 lockout => '$_[0] Excluido del sistema',
529 lockoutc => '$_[0] Creado y excluido del sistema',
530 lockoutun => '$_[0] autorizado para conectar',
531 lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
532 loginu => '$_[0] conecta',
533 logoutu => '$_[0] se desconecta',
534 loginn => '$_[0] conecta',
535 logoutn => '$_[0] se desconecta',
536 m1 => 'Introduce el título (máx. 30 caractéres):',
538 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
539 m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
540 m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
541 m5 => 'Lo siento, se necesita un número de mensaje',
542 m6 => 'Reenviado a: $_[0]',
543 m7 => 'Título : $_[0]',
544 m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
545 m9 => 'Hay correo nuevo para ti. Bórralo una vez leído.',
546 m10 => 'mensaje interrumpido',
547 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
548 m12 => 'mensaje nr $_[0] borrado',
549 m13 => 'mensaje nr $_[0] no encontrado',
550 m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
551 m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
552 m16 => 'Se necesita un número de mensaje',
553 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
554 msg1 => 'Cola de mensajes tipo Boletín',
555 msg2 => 'Cola de mensajes tipo Privados',
556 msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
557 msgu => 'uso: msg <cmd> <msgno> data...',
558 merge1 => 'Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]',
559 moon => 'QTH dd/mm/yyyy Salida Puesta',
560 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
561 mond => 'Activado modo monitor',
562 mone => 'Desactivado modo monitor',
563 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
564 namee2 => 'No se encuentra el usuario $_[0]!',
565 name => 'Tu nombre es \"$_[0]\"',
566 nodea => '$_[0] definido como nodo AK1A ',
567 nodeac => '$_[0] creado como nodo AK1A ',
568 nodeb => '$_[0] definido como BBS',
569 nodebc => '$_[0] creado como BBS',
570 nodec => '$_[0] definido como nodo CLX ',
571 nodecc => '$_[0] creado como nodo CLX ',
572 noder => '$_[0] definido como nodo AR-Cluster ',
573 noderc => '$_[0] creado como nodo AR-Cluster ',
574 nodes => '$_[0] definido como nodo DXSpider ',
575 nodesc => '$_[0] creado como nodo DXSpider ',
576 nodex => '$_[0] definido como nodo DXNET ',
577 nodexc => '$_[0] creado como nodo DXNET ',
578 nodeu => '$_[0] es ahora un usuario',
579 nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
580 notdone => 'No se pudo hacer',
581 nothere => 'Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde',
582 obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
583 ok => 'Operación realizada',
584 outconn => 'Iniciando conexión con $_[0]',
585 page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >',
586 pagelth => 'La longitud de las páginas es ahora $_[0]',
587 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
588 password => 'El Password ha sido definido o cambiado para $_[0]',
589 pingo => 'Iniciado el ping a $_[0]',
590 pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
591 pinge1 => 'No puedes enviarte un ping a ti mismo!',
592 pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
593 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
594 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
595 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
596 prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
597 pru => 'El Prompt vuelve a ser el normal por defecto',
598 priv => 'Nivel de privilegios está en $_[0]',
599 prx => '$main::mycall >',
600 pw0 => 'Escribe el password antiguo: ',
601 pw1 => 'Escribe el nuevo password: ',
602 pw2 => 'Confirma el nuevo password: ',
603 pw3 => 'El Password ha sido cambiado',
604 pw4 => 'Los passwords no coinciden, NO se han cambiado',
605 qll => 'Por favor introduce tu locator con set/location o set/qra',
606 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
607 qth => 'Tu QTH es ahora \"$_[0]\"',
608 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
609 qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
610 qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
611 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
612 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
613 read1 => 'Lo siento, no hay mensajes nuevos para ti',
614 read2 => 'Mensaje $_[0] no encontrado',
615 read3 => 'Mensaje $_[0] no disponible',
616 rec => '$_[0] registros',
617 reg => '$_[0] registrado',
618 regc => '$_[0] creado y registrado',
619 reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
620 regun => '$_[0] borrado',
621 route => '$_[0] en $_[1] vía $_[2]',
622 sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
623 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
624 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
625 sat4 => 'Satélites disponibles:',
626 sat5 => 'Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje',
627 satnf => 'Satélite $_[0] desconocido',
629 sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
630 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
631 sethop3 => 'No hay hops definidos para $_[0]',
632 shutting => '$main::mycall shutting down...',
633 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
634 snode1 => 'Nodo Call Sort Versión',
635 snode2 => '$_[0] $_[1] $_[2]',
636 snode3 => '$_[0] Indicativo desconocido',
637 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
638 sorry => 'Lo siento',
639 spf1 => 'spoof: creando nuevo usuario $_[0]',
640 stathf => 'Estadísticas de spots en HF de los últimos 31 días',
641 stathft => 'Estadísticas de spots en HF de los últimos 31 días para DXCC $_[0]',
642 statvhf => 'VHF+ DX Spot Stats, últimos 31 días',
643 statvhft => 'VHF+ DX Spot Stats, últimos 31 días para DXCC $_[0]',
644 statdx => 'Total DX Spots últimos 31 días',
645 sun => 'QTH dd/mm/yyyy Salida Puesta',
646 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
647 suser1 => 'uso: indicativo user_field_name valor',
648 suser2 => 'Usuario $_[0] no encontrado',
649 suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
650 suser4 => 'User field name \'$_[0]\' no existe',
651 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
652 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
653 time3 => '$_[0] $_[1]',
654 talks => 'Recepción de mensajes Talk activado para $_[0]',
655 talku => 'Recepción de mensajes Talk desactivado para $_[0]',
656 talkend => 'Finalizado modo talk contigo',
657 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
658 talknh => 'Lo siento $_[0] no está conectado en este momento',
659 talkprompt => 'Talk ($_[0])>',
660 talkstart => 'Iniciando modo talk contigo',
661 unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
662 unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
663 usernf => '*** Registro de usuario $_[0] no encontrado ***',
664 wwvs => 'Activada recepción de anuncios WWV para $_[0]',
665 wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
666 wxs => 'Activada recepción de anuncios WX para $_[0]',
667 wxu => 'Desactivada recepción de anuncios WX para $_[0]',
670 addr => 'Adresse gesetzt auf: $_[0]',
671 already => '$_[0] bereits connnected',
672 anns => 'Announce flag gesetzt auf $_[0]',
673 annu => 'Announce flag zurueckgesetzt auf $_[0]',
674 annts => 'AnnTalk flag gesetzt auf $_[0]',
675 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
676 badnode1 => '$_[0] ist nun ein bad node',
677 badnode2 => '$_[0] ist nun ein good node',
678 badnode3 => 'Liste der Bad Nodes:-',
679 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
680 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
681 beepoff => 'Beeps sind nun aus',
682 beepon => 'Beeps sind nun eingeschaltet',
683 call1 => 'Callsign lookup via $_[0]:',
684 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
685 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
686 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
687 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
688 constart => 'Verbindung zu $_[0] gestartet',
689 deluser => 'User $_[0] wurde geloescht',
690 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
691 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
692 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
693 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
694 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
695 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
696 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
697 db8 => 'Datenbank $_[0] lokal angelegt',
698 db9 => 'Datenbank $_[0] entfernt',
699 db10 => '$_[0] Datensaetze importiert in $_[1]',
700 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
701 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
702 dir1 => 'Keine Nachricht gefunden',
703 disc1 => 'Disconnected von $_[0]',
704 disc2 => 'Kanal $_[0] disconnected',
705 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
706 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
708 dup => 'Sorry, dies ist ein Duplikat',
709 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
710 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
711 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
712 dxs => 'DX Spots flag gesetzt auf $_[0]',
713 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
714 e1 => 'Ungueltiger Befehl',
715 e2 => 'Fehler: $_[0]',
716 e3 => '$_[0]: $_[1] nicht gefunden',
717 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
718 e5 => 'Nicht erlaubt',
719 e6 => '*** Keine Station angegeben ***',
720 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
721 e8 => 'Brauche ein Rufzeichen und etwas Text',
722 e9 => 'Brauche wenigstens etwas Text',
723 e10 => '$_[0] nicht lokal connected',
724 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
725 e12 => 'Brauche ein Node Rufzeichen',
726 e13 => '$_[0] ist kein Node',
727 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
728 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
729 e16 => 'Datei \"$_[0]\" existiert',
730 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
731 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
732 e19 => 'Ungueltiger Character in der Zeile',
733 e20 => 'Kuerzel $_[0] nicht erkannt',
734 e21 => '$_[0] nicht numerisch',
735 e22 => '$_[0] kein Rufzeichen',
736 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
737 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
739 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
740 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
741 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
742 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
743 e29 => 'Brauche eine Passwort',
744 echoon => 'Echo enabled',
745 echooff => 'Echo disabled',
746 echow => '*Echo ist im moment disabled, set/echo to enable',
747 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
748 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
749 email => 'E-mail Adresse gesetzt auf: $_[0]',
750 export1 => 'Gebrauch: export <msgno> <dateiname>',
751 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
752 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
753 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
754 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
755 filter3 => 'Keine Filter definiert fuer $_[0]',
756 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
757 filter5 => 'brauche ein paar Filter Kommandos...',
758 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
759 grids => 'DX Grid flag gesetzt auf $_[0]',
760 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
761 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
762 hasha => '$_[0] existiert bereits in $_[1]',
763 hashb => '$_[0] zugefuegt zu $_[1]',
764 hashc => '$_[0] entfernt von $_[1]',
765 hashd => '$_[0] nicht in $_[1]',
766 hashe => '$_[0] gesetzt auf $_[1]',
767 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
768 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
769 heres => 'Hier gesetzt auf $_[0]',
770 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
771 hereu => 'Here zurueckgesetzt auf $_[0]',
772 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
773 homenode => 'Heimat Node gesetzt auf: $_[0]',
774 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
775 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
776 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
777 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
778 iso => '$_[0] Isoliert',
779 isou => '$_[0] UnIsoliert',
780 isoc => '$_[0] erstellt und Isoliert',
781 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
782 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
783 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
784 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
785 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
786 lang => 'Sprache ist jetzt Deutch',
787 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
788 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
789 lh1 => '$main::data/hop_table.pl existiert nicht',
790 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
791 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
792 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
793 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
794 lockout => '$_[0] ausgesperrt',
795 lockoutc => '$_[0] erstellt und ausgesperrt',
796 lockoutun => '$_[0] Aussperrung aufgehoben',
797 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
798 loginu => 'User $_[0] hat eingeloggt',
799 logoutu => 'User $_[0] hat ausgeloggt',
800 loginn => 'Node $_[0] hat eingeloggt',
801 logoutn => 'Node $_[0] hat ausgeloggt',
802 m1 => 'Subjekt eingeben (30 Zeichen):',
803 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
804 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
805 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
806 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
807 m6 => 'Reply to: $_[0]',
808 m7 => 'Subject : $_[0]',
809 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
810 m9 => 'Neue Nachricht(en) fuer Dich',
811 m10 => 'Nachricht abgebrochen',
812 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
813 m12 => 'Nachricht Nr. $_[0] geloescht',
814 m13 => 'Nachricht Nr. $_[0] fehlt',
815 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
816 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
817 m16 => 'Brauche eine Nachrichten Nummer',
818 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
819 msg1 => 'Bulletin Nachrichten aufgeschoben',
820 msg2 => 'Private Nachrichten aufgeschoben',
821 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
822 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
823 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
824 moon => 'Standort dd/mm/yyyy Rise Set',
825 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
826 mond => 'Ueberwachung Disabled',
827 mone => 'Ueberwachung Enabled',
828 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
829 namee2 => 'Kann User $_[0]nicht finden!',
830 name => 'Dein Name ist jetzt \"$_[0]\"',
831 nodea => '$_[0] gesetzt als AK1A style Node',
832 nodeac => '$_[0] erstellt als AK1A style Node',
833 nodeb => '$_[0] gesetzt als BBS',
834 nodebc => '$_[0] erstellt als BBS',
835 nodec => '$_[0] gesetzt als CLX style Node',
836 nodecc => '$_[0] erstellt als CLX style Node',
837 noder => '$_[0] gesetzt als AR-Cluster style Node',
838 noderc => '$_[0] erstellt als AR-Cluster style Node',
839 nodes => '$_[0] gesetzt als DXSpider style Node',
840 nodesc => '$_[0] erstellt als DXSpider style Node',
841 nodex => '$_[0] gesetzt als DXNET style Node',
842 nodexc => '$_[0] erstellt als DXNET style Node',
843 nodeu => '$_[0] zurueckgesetzt als ein User',
844 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
845 notdone => 'Nicht ausgefuehrt',
846 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
847 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
848 ok => 'Operation erfolgreich',
849 outconn => 'Outstanding connect to $_[0]',
850 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
851 pagelth => 'Seitenlaenge ist nun $_[0]',
852 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
853 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
854 passwordu => 'Passwort geloescht fuer $_[0]',
855 pingo => 'Ping Started to $_[0]',
856 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
857 pinge1 => 'Cannot ping yourself!',
858 pingint => 'Ping interval on $_[0] set to $_[1] secs',
859 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
860 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
861 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
862 priv => 'Priviligierten Level geaendert auf $_[0]',
863 prx => '$main::mycall >',
864 pw0 => 'Altes Passwort eingeben: ',
865 pw1 => 'Neues Passwort eingeben: ',
866 pw2 => 'Wiederhole neues Passwort: ',
867 pw3 => 'Passwort geaendert',
868 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
869 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
870 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
871 qth => 'Dein QTH ist nun \"$_[0]\"',
872 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
873 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
874 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
875 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
876 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
877 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
878 read2 => 'Msg $_[0] nicht gefunden',
879 read3 => 'Msg $_[0] nicht verfuegbar',
880 rec => '$_[0] records',
881 reg => '$_[0] registriert',
882 regc => '$_[0] erstellt und registriert',
883 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
884 regun => '$_[0] unregistriert',
885 route => '$_[0] auf $_[1] via $_[2]',
886 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
887 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
888 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
889 sat4 => 'Satelliten verfuegbar:-',
890 satnf => 'Satellit $_[0] unbekannt',
892 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
893 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
894 sethop3 => 'Keine hops gesetzt fuer $_[0]',
895 shutting => '$main::mycall shutting down...',
896 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
897 snode1 => 'Node Call Sort Version',
898 snode2 => '$_[0] $_[1] $_[2]',
899 snode3 => '$_[0] Unbekanntes Rufzeichen',
900 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
902 spf1 => 'spoof: erzeuge neuen User $_[0]',
903 stathf => 'HF DX Spot Stats, letzte 31 Tage',
904 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
905 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
906 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
907 statdx => 'Total DX Spots letzte 31 Tage',
908 sun => 'Location dd/mm/yyyy Rise Set',
909 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
910 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
911 suser2 => 'User $_[0] nicht gefunden',
912 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
913 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
914 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
915 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
916 time3 => '$_[0] $_[1]',
917 talks => 'Talk flag gesetzt auf $_[0]',
918 talku => 'Talk flag zurueckgesetzt auf $_[0]',
919 talkend => 'Beendet Talk zu Dir',
920 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
921 talknh => 'Sorry $_[0] ist im moment nicht online',
922 talkprompt => 'Talk ($_[0])>',
923 talkstart => 'Startet Talkmode zu Dir',
924 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
925 wwvs => 'WWV flag gesetzt auf $_[0]',
926 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
927 wxs => 'WX flag gesetzt auf $_[0]',
928 wxu => 'WX flag zurueckgesetzt auf $_[0]',
931 addr => 'Indirizzo impostato a: $_[0]',
932 already => '$_[0] e\' connesso',
933 anns => 'Annunci attivati alle_[0]',
934 annu => 'Annunci disattivati alle $_[0]',
935 annts => 'Talk attivato alle $_[0]',
936 anntu => 'Talk disattivato alle $_[0]',
937 badnode1 => '$_[0] e\' un nodo disabilitato',
938 badnode2 => '$_[0] e\' un nodo attivo',
939 badnode3 => 'Lista dei nodi disabilitati:-',
940 bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
941 bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
942 beepoff => 'I beep sono disattivati',
943 beepon => 'I beep sono attivati',
944 call1 => 'Ricerca del nominativo via $_[0]:',
945 conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
946 concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
947 conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
948 confail => 'connessione a $_[0] fallita ($_[1])',
949 constart => 'connessione a $_[0] iniziata',
950 deluser => 'L\'utente $_[0] e\' stato eliminato',
951 db1 => 'Questo database e\' presso $_[0]',
952 db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
953 db3 => 'Spiacente, il database $_[0] non esiste qui',
954 db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
955 db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
956 db6 => 'Il database $_[0] esiste già, cancellalo prima',
957 db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
958 db8 => 'Il database $_[0] e\' stato creato localmente',
959 db9 => 'Il database $_[0] e\' stato eliminato',
960 db10 => '$_[0] record importati in $_[1]',
961 db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
962 dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
963 dir1 => 'Nessun messaggio trovato',
964 disc1 => 'Disconnesso da $_[0]',
965 disc2 => 'Canalew $_[0] disconnesso',
966 disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
967 disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
969 dup => 'Spiacente, questo e\' un doppione',
970 dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
971 dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
972 dx3 => 'Il nominativo o la frequenza sono errati',
973 dxs => 'DX Spots attivati alle $_[0]',
974 dxu => 'DX Spots disattivati alle $_[0]',
975 e1 => 'Comando errato',
976 e2 => 'Errore: $_[0]',
977 e3 => '$_[0]: $_[1] non trovato',
978 e4 => 'Inserire un prefisso o un nominativo',
979 e5 => 'Non permesso',
980 e6 => '*** Nessuna stazione specificata ***',
981 e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
982 e8 => 'Inserire un nominativo o del testo',
983 e9 => 'Inserire del testo',
984 e10 => '$_[0] non connesso localmente',
985 e11 => 'Impossibile usare $main:mycall come destinazione',
986 e12 => 'Inserire il nominativo di un nodo',
987 e13 => '$_[0] non e\' un nodo',
988 e14 => 'Il primo argomento deve essere numerico e > 0',
989 e15 => 'qualificatore non valido \"$_[0]\"',
990 e16 => 'Il file \"$_[0]\" esiste',
991 e17 => 'Non usare le parole: @_ qui',
992 e18 => 'Impossibile connettere $_[0] ($!)',
993 e19 => 'Carattere non valido nella linea',
994 e20 => 'separatore $_[0] non riconosciuto',
995 e21 => '$_[0] non e\' numerico',
996 e22 => '$_[0] non e\' un nominativo',
997 e23 => '$_[0] non e\' un intervallo (es 0/30000)',
998 e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
999 e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
1000 e26 => 'Troppi errori, stai per essere disconnesso',
1001 e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
1002 e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
1003 e29 => 'E\' necessaria una password',
1005 echoon => 'Echo abilitato',
1006 echooff => 'Echo disabilitato',
1007 echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
1008 emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
1009 emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
1010 email => 'Indirizzo email impostato a: $_[0]',
1011 export1 => 'sintassi: export <num_mess> <nome_file>',
1012 export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
1013 export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
1014 filter1 => 'Filtro $_[0] aggiornato per $_[1]',
1015 filter2 => 'Chiave sconosciuta per il filtro $_[0]',
1016 filter3 => 'Nessun filtro definito per $_[0]',
1017 filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
1018 filter5 => 'necessito qualche comando per i filtri...',
1019 filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
1020 grids => 'DX Grid attivato alle $_[0]',
1021 gridu => 'DX Grid disattivato alle $_[0]',
1022 illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
1023 hasha => '$_[0] già esiste $_[1]',
1024 hashb => '$_[0] aggiunto a $_[1]',
1025 hashc => '$_[0] rimosso da $_[1]',
1026 hashd => '$_[0] non in $_[1]',
1027 hashe => '$_[0] impostato a $_[1]',
1028 helpe1 => 'Aiuto non disponibile, contatta il sysop',
1029 helpe2 => 'Nessun aiuto per $_[0]',
1030 heres => 'Here abilitato per $_[0]',
1031 heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
1032 hereu => 'Here disattivato per $_[0]',
1033 homebbs => 'Home BBS impostata a: $_[0]',
1034 homenode => 'Home Node impostato a: $_[0]',
1035 hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
1036 hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
1037 hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
1038 init1 => 'inizializzaione inviata a $_[0]',
1039 iso => '$_[0] Isolato',
1040 isou => '$_[0] non Isolato',
1041 isoc => '$_[0] creato ed isolato',
1042 isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
1043 isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
1044 isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
1045 l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
1046 l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
1047 lang => 'La lingua selezionata e\' adesso Italiano',
1048 lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
1049 lange2 => 'impostazione lingua fallita per $_[0]',
1050 lh1 => '$main::data/hop_table.pl non esiste',
1051 loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
1052 loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
1053 loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
1054 loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
1055 lockout => '$_[0] Bloccato',
1056 lockoutc => '$_[0] Creato e bloccato',
1057 lockoutun => '$_[0] Sbloccato',
1058 lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
1059 loginu => 'L\'utente $_[0] e\' entrato nel cluster',
1060 logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
1061 loginn => 'Il nodo $_[0] si e\' connesso',
1062 logoutn => 'Il nodo $_[0] si e\' disconnesso',
1063 m1 => 'Inserisci il Soggetto (30 caratteri):',
1064 m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
1065 m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
1066 m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
1067 m5 => 'Spiacente, ho bisogno del numero di un messaggio',
1068 m6 => 'Rispondi a: $_[0]',
1069 m7 => 'Soggetto : $_[0]',
1070 m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
1071 m9 => 'Nuovi messaggi sono arrivati per te',
1072 m10 => 'Messaggio abortito',
1073 m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
1074 m12 => 'Il messaggio $_[0] e\' stato cancellato',
1075 m13 => 'Il messaggio $_[0] non esiste',
1076 m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
1077 m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
1078 m16 => 'Specificare il numero del messaggio',
1079 m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
1080 msg1 => 'Bollettino messo in coda',
1081 msg2 => 'Messaggio messo in coda',
1082 msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
1083 msgu => 'sintassi: msg <comando> <num_mess> dati...',
1084 merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
1085 moon => 'Localita gg/mm/aaaa Alba Tramonto',
1086 moon_with_azel => 'Località
1087 gg/mm/aaaa Alba Tramonto Azim Elev',
1088 mond => 'Monitor disabilitato',
1089 mone => 'Monitor abilitato',
1090 namee1 => 'Per favore inserisci con set/name <nome>',
1091 namee2 => 'Impossibile trovare l\'utente $_[0]!',
1092 name => 'Il tuo nome ora e\' \"$_[0]\"',
1093 nodea => '$_[0] impostato come nodo stile AK1A',
1094 nodeac => '$_[0] creato come nodo stile AK1A',
1095 nodeb => '$_[0] impostato come BBS',
1096 nodebc => '$_[0] creato come BBS',
1097 nodec => '$_[0] impostato come nodo stile CLX',
1098 nodecc => '$_[0] creato come nodo stile CLX',
1099 noder => '$_[0] impostato come nodo stile AR-Cluster',
1100 noderc => '$_[0] creato come nodo stile AR-Cluster',
1101 nodes => '$_[0] impostato come nodo stile DXSpider',
1102 nodesc => '$_[0] creato come nodo stile DXSpider',
1103 nodex => '$_[0] impostato come nodo stile DXNET',
1104 nodexc => '$_[0] creato come nodo stile DXNET',
1105 nodeu => '$_[0] impostato come utente',
1106 nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
1107 notdone => 'Non eseguito',
1108 nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
1109 obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
1110 ok => 'Operazione eseguita con successo',
1111 outconn => 'Connessione in corso per $_[0]',
1112 page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
1113 pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
1114 passerr => 'sintassi: SET/PASS <password> <nominativo>',
1115 password => 'Password impostata o cambiata per $_[0]',
1116 passwordu => 'Password rimossa per $_[0]',
1117 pingo => 'Ping mandato a $_[0]',
1118 pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
1119 pinge1 => 'Non puoi far un ping su te stesso!',
1120 pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
1121 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
1122 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1123 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1124 priv => 'Privilegi cambiati per $_[0]',
1125 prs => 'Prompt impostato a \"$_[0]\"',
1126 pru => 'Prompt reimpostato al predefinito',
1127 prx => '$main::mycall >',
1128 pw0 => 'Inserisci la vecchia password: ',
1129 pw1 => 'Inserisci la nuova password: ',
1130 pw2 => 'Reinserisci la nuova password: ',
1131 pw3 => 'Password modificata',
1132 pw4 => 'Le password sono differenti, password NON cambiata',
1133 qll => 'Per favore inserisci la tua località con set/location o set/qra',
1134 qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
1135 qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
1136 qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
1137 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
1138 qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
1139 qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
1140 rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
1141 rec => '$_[0] records',
1142 read1 => 'Spiacente, non ci sono nuovi messaggi per te',
1143 read2 => 'Messaggio $_[0] non trovato',
1144 read3 => 'Messaggio $_[0] non disponibile',
1145 rec => '$_[0] records',
1146 reg => '$_[0] registrato',
1147 regc => '$_[0] creato e registrato',
1148 reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
1149 regun => '$_[0] deregistrato',
1150 route => '$_[0] su $_[1] via $_[2]',
1151 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
1152 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
1153 sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
1154 sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
1155 sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
1156 satnf => 'Satellite $_[0] sconosciuto',
1158 sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
1159 sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
1160 sethop3 => 'Nessun salto impostato per $_[0]',
1161 shutting => '$main::mycall si sta arrestando...',
1162 sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
1163 snode1 => 'Nodo Nominativo Ordine Versione',
1164 snode2 => '$_[0] $_[1] $_[2]',
1165 snode3 => '$_[0] Nominativo sconosciuto',
1166 sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
1167 sorry => 'Spiacente',
1168 spf1 => 'spoof: sto creando il nuovo utente $_[0]',
1169 stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
1170 stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
1171 statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
1172 statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
1173 statdx => 'Totale DX Spots degli ultimi 31 giorni',
1174 sun => 'Località gg/mm/aaaa Alba Tramonto',
1175 sun_with_azel => 'Località
1176 gg/mm/aaaa Alba Tramonto Azim Elev',
1178 suser1 => 'sintassi: nominatio campo_utente valore',
1179 suser2 => 'Utente $_[0] non trovato',
1180 suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
1181 suser4 => 'Il campo utente \'$_[0]\' non esiste',
1182 time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
1183 time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
1184 time3 => '$_[0] $_[1]',
1185 talks => 'Talk abilitato per $_[0]',
1186 talku => 'Talk disabilitato per $_[0]',
1187 talkend => 'Chiude il la conversazione con te',
1188 talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
1189 talknh => 'Spiaente $_[0] non e\' collegato al momento',
1190 talkprompt => 'Talk ($_[0])>',
1191 talkstart => 'Inizia una conversazione con te',
1192 unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
1193 unsethop2 => 'salti eliminati su $_[1] per $_[0]',
1194 usernf => '*** Record utente per $_[0] non trovato ***',
1195 wcy1 => '$_[0] manca o e\' fuori limite',
1196 wcy2 => 'WCY duplicato',
1197 wwv1 => '$_[0] manca o e\' fuori limite',
1198 wwv2 => 'WWV duplicato',
1199 wwvs => 'WWV abilitati per $_[0]',
1200 wwvu => 'WWV disabilitati per $_[0]',
1201 wxs => 'WX abilitati per $_[0]',
1202 wxu => 'WX disabilitati per $_[0]',
projects / spider.git / blob