3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announces enabled for $_[0]',
16 annu => 'Announces disabled for $_[0]',
17 annts => 'AnnTalk enabled for $_[0]',
18 anntu => 'AnnTalk disabled for $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots enabled for $_[0]',
56 dxu => 'DX Spots disabled for $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
86 e30 => 'Cannot Open $_[0] $!',
87 e31 => '$_[0] is not a user',
89 echoon => 'Echoing enabled',
90 echooff => 'Echoing disabled',
91 echow => '*Echoing is currently disabled, set/echo to enable',
92 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
93 emaila => 'Your E-Mail Address is now \"$_[0]\"',
94 email => 'E-mail address set to: $_[0]',
95 export1 => 'usage: export <msgno> <filename>',
96 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
97 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
98 filter1 => 'Filter $_[0] updated for $_[1]',
99 filter2 => 'Unknown filter keyword $_[0]',
100 filter3 => 'No filters defined for $_[0]',
101 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
102 filter5 => 'need some filter commands...',
103 filter6 => '$_[0]$_[1] Filter for $[2] not found',
104 grids => 'DX Grid enabled for $_[0]',
105 gridu => 'DX Grid disabled for $_[0]',
106 illcall => 'Sorry, $_[0] is an invalid callsign',
107 hasha => '$_[0] already exists in $_[1]',
108 hashb => '$_[0] added to $_[1]',
109 hashc => '$_[0] removed from $_[1]',
110 hashd => '$_[0] not in $_[1]',
111 hashe => '$_[0] set on $_[1]',
112 helpe1 => 'Help system unavailable, tell sysop',
113 helpe2 => 'No help available on $_[0]',
114 heres => 'Here set on $_[0]',
115 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
116 hereu => 'Here unset on $_[0]',
117 homebbs => 'Home BBS set to: $_[0]',
118 homenode => 'Home Node set to: $_[0]',
119 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
120 hnodee2 => 'Failed to set homenode on $_[0]',
121 hnode => 'Your Homenode is now \"$_[0]\"',
122 init1 => 'sent initialisation message to $_[0]',
123 iso => '$_[0] Isolated',
124 isou => '$_[0] UnIsolated',
125 isoc => '$_[0] created and Isolated',
126 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
127 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
128 isow => '$_[0] is isolated; unset/isolate $_[0] first',
129 l1 => 'Sorry $_[0], you are already logged on on another channel',
130 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
131 lang => 'Language is now English',
132 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
133 lange2 => 'failed to set language on $_[0]',
134 lh1 => '$main::data/hop_table.pl doesn\'t exist',
135 loce1 => 'Please enter your location,, set/location <latitude longitude>',
136 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
137 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
138 loc => 'Your Lat/Long is now \"$_[0]\"',
139 lockout => '$_[0] Locked out',
140 lockoutc => '$_[0] Created and Locked out',
141 lockoutun => '$_[0] Unlocked',
142 lockoutuse => 'usage: sh/lockout <call>|ALL',
143 loginu => 'User $_[0] has logged in',
144 logoutu => 'User $_[0] has logged out',
145 loginn => 'Node $_[0] has logged in',
146 logoutn => 'Node $_[0] has logged out',
147 m1 => 'Enter Subject (30 characters):',
148 m2 => 'Copy of msg $_[0] sent to $_[1]',
149 m3 => 'Sorry, $_[0] is an unacceptable TO address',
150 m4 => 'Sorry, can\'t access message $_[0]',
151 m5 => 'Sorry, I need a message number',
152 m6 => 'Reply to: $_[0]',
153 m7 => 'Subject : $_[0]',
154 m8 => 'Enter Message /EX to send or /ABORT to exit',
155 m9 => 'New mail has arrived for you',
156 m10 => 'Message Aborted',
157 m11 => 'Message no $_[0] saved and directed to $_[1]',
158 m12 => 'Message no $_[0] deleted',
159 m13 => 'Message no $_[0] missing',
160 m14 => 'Message no $_[0] marked as sent to $_[1]',
161 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
162 m16 => 'Need a Message number',
163 m17 => 'Sorry, cannot send messages in $_[0] mode',
164 msg1 => 'Bulletin Messages Queued',
165 msg2 => 'Private Messages Queued',
166 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
167 msgu => 'usage: msg <cmd> <msgno> data...',
168 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
169 moon => 'Location dd/mm/yyyy Rise Set',
170 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
171 mond => 'Monitoring Disabled',
172 mone => 'Monitoring Enabled',
173 namee1 => 'Please enter your name, set/name <your name>',
174 namee2 => 'Can\'t find user $_[0]!',
175 name => 'Your name is now \"$_[0]\"',
176 nodea => '$_[0] set as AK1A style Node',
177 nodeac => '$_[0] created as AK1A style Node',
178 nodeb => '$_[0] set as BBS',
179 nodebc => '$_[0] created as BBS',
180 nodec => '$_[0] set as CLX style Node',
181 nodecc => '$_[0] created as CLX style Node',
182 noder => '$_[0] set as AR-Cluster style Node',
183 noderc => '$_[0] created as AR-Cluster style Node',
184 nodes => '$_[0] set as DXSpider style Node',
185 nodesc => '$_[0] created as DXSpider style Node',
186 nodex => '$_[0] set as DXNET style Node',
187 nodexc => '$_[0] created as DXNET style Node',
188 nodeu => '$_[0] set back as a User',
189 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
190 notdone => 'NOT Done',
191 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
192 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
193 ok => 'Operation successful',
194 outconn => 'Outstanding connect to $_[0]',
195 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
196 pagelth => 'Page Length is now $_[0]',
197 passerr => 'Please use: SET/PASS <password> <callsign>',
198 password => 'Password set or changed for $_[0]',
199 passwordu => 'Password removed for $_[0]',
200 pingo => 'Ping Started to $_[0]',
201 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
202 pinge1 => 'Cannot ping yourself!',
203 pingint => 'Ping interval on $_[0] set to $_[1] secs',
204 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
205 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
206 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
207 prs => 'Prompt now set to \"$_[0]\"',
208 pru => 'Prompt now set back to default',
209 priv => 'Privilege level changed on $_[0]',
210 prx => '$main::mycall >',
211 pw0 => 'Enter old password: ',
212 pw1 => 'Enter new password: ',
213 pw2 => 'Re-enter new password: ',
214 pw3 => 'Password changed',
215 pw4 => 'Passwords differ, password NOT changed',
216 qll => 'Please enter your location with set/location or set/qra',
217 qthe1 => 'Please enter your QTH, set/qth <your qth>',
218 qth => 'Your QTH is now \"$_[0]\"',
219 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
220 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
221 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
222 qra => 'Your QRA Locator is now \"$_[0]\"',
223 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
224 read1 => 'Sorry, no new messages for you',
225 read2 => 'Msg $_[0] not found',
226 read3 => 'Msg $_[0] not available',
227 rec => '$_[0] records',
228 reg => '$_[0] registered',
229 regc => '$_[0] created and registered',
230 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
231 regun => '$_[0] unregistered',
232 route => '$_[0] on $_[1] via $_[2]',
233 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
234 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
235 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
236 sat4 => 'Satellites available/Age of Keps (days):-',
237 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
238 satnf => 'Satellite $_[0] unknown',
240 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
241 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
242 sethop3 => 'No hops set for $_[0]',
243 shutting => '$main::mycall shutting down...',
244 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
245 snode1 => 'Node Call Sort Version',
246 snode2 => '$_[0] $_[1] $_[2]',
247 snode3 => '$_[0] Unknown Call',
248 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
250 spf1 => 'spoof: creating new user $_[0]',
251 stathf => 'HF DX Spot Stats, last 31 days',
252 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
253 statvhf => 'VHF+ DX Spot Stats, last 31 days',
254 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
255 statdx => 'Total DX Spots last 31 days',
256 sun => 'Location dd/mm/yyyy Rise Set',
257 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
258 suser1 => 'usage: callsign user_field_name value',
259 suser2 => 'User $_[0] not found',
260 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
261 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
262 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
263 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
264 time3 => '$_[0] $_[1]',
265 talks => 'Talk enabled for $_[0]',
266 talku => 'Talk disabled for $_[0]',
267 talkend => 'Finished talking to you',
268 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
269 talknh => 'Sorry $_[0] is not online at the moment',
270 talkprompt => 'Talk ($_[0])>',
271 talkstart => 'Starting talking to you',
272 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
273 unsethop2 => 'hops unset on $_[1] for $_[0]',
274 usernf => '*** User record for $_[0] not found ***',
275 wcy1 => '$_[0] is missing or out of range',
276 wcy2 => 'Duplicate WCY',
277 wcys => 'WCY enabled for $_[0]',
278 wcyu => 'WCY disabled for $_[0]',
279 wwv1 => '$_[0] is missing or out of range',
280 wwv2 => 'Duplicate WWV',
281 wwvs => 'WWV enabled for $_[0]',
282 wwvu => 'WWV disabled $_[0]',
283 wxs => 'WX enabled for $_[0]',
284 wxu => 'WX disabled for $_[0]',
287 addr => 'Addres gezet op: $_[0]',
288 already => '$_[0] reeds geconnect',
289 anns => 'Announce berichten AAN gezet voor $_[0]',
290 annu => 'Announce berichten UIT gezet voor $_[0]',
291 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
292 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
293 beepoff => 'De beep staat nu UIT',
294 beepon => 'De beep staat nu AAN',
295 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
296 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
297 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
298 confail => 'Verbinding met $_[0] mislukt ($_[1])',
299 constart => 'Verbinding met $_[0] gestart',
300 disc1 => 'Gedisconnect door $_[0]',
301 disc2 => '$_[0] gedisconnect',
302 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
303 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
304 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
305 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
306 e1 => 'Ongeldige opdracht',
308 e3 => '$_[0]: $_[1] niet gevonden',
309 e4 => 'Minimaal een prefix of een call nodig',
310 e5 => 'Niet toegestaan',
311 e6 => '*** Geen station gespecifiseerd ***',
312 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
313 e8 => 'Ik heb een call en tekst nodig',
314 e9 => 'Ik heb wel tekst nodig voor een announce!',
315 e10 => '$_[0] is niet lokaal verbonden',
316 e12 => 'Ik heb een node call nodig',
317 e13 => '$_[0] is geen node',
318 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
319 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
320 email => 'E-mail addres gezet op: $_[0]',
321 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
322 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
323 heres => 'Aanwezigheid AAN gezet voor $_[0]',
324 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
325 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
326 homebbs => 'Uw Home mailbox is nu $_[0]',
327 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
328 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
329 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
330 iso => '$_[0] is geisoleerd (Isolated)',
331 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
332 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
333 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
334 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
335 lang => 'De taal zijn nu Nederlandse',
336 lh1 => '$main::data/hop_table.pl bestaat niet',
337 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
338 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
339 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
340 lockout => '$_[0] heeft geen toegang meer (Locked out)',
341 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
342 m2 => '$_[0] Informatie: $_[1]',
343 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
344 msgnew => 'Er is nieuwe post gearriveerd voor u',
345 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
346 namee2 => 'Gebruiker $_[0] niet te vinden!',
347 name => 'Uw naam is gezet op \"$_[0]\"',
348 node => '$_[0] gezet als een AK1A stijl DX-cluster',
349 nodeu => '$_[0] teruggezet naar gebruiker status',
350 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
351 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
352 ok => 'Opdracht succesvol uitgevoerd',
353 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
354 pagelth => 'Paginalengte gezet op ($_[0]) regels',
355 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
356 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
357 pingo => 'Ping gestart naar $_[0]',
358 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
359 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
360 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
361 priv => 'Privilege level gewijzigd op $_[0]',
362 prx => '$main::mycall >',
363 qll => 'Geef uw locator met set/location of set/qra',
364 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
365 qth => 'Uw QTH is nu \"$_[0]\"',
366 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
367 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
368 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
369 qra => 'Uw QRA Locator is nu \"$_[0]\"',
370 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
371 read1 => 'Sorry, geen berichten voor u',
372 read2 => 'Bericht $_[0] niet gevonden',
373 read3 => 'Bericht $_[0] niet beschikbaar',
374 shutting => '$main::mycall gaat QRT...',
375 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
376 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
377 talks => 'Talk berichten AAN gezet voor $_[0]',
378 talku => 'Talk berichten UIT gezet voor $_[0]',
379 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
380 wwvs => 'WWV berichten AAN gezet voor $_[0]',
381 wwvu => 'WWV berichten UIT gezet voor $_[0]',
382 wxs => 'WX berichten AAN gezet voor $_[0]',
383 wxu => 'WX berichten UIT gezet voor $_[0]',
388 addr => 'La dirección es ahora: $_[0]',
389 already => '$_[0] ya está conectado',
390 anns => 'Activada la recepción de anuncios para $_[0]',
391 annu => 'Desactivada la recepción de anuncios para $_[0]',
392 annts => 'Modo AnnTalk activado para $_[0]',
393 anntu => 'Modo AnnTalk desactivado para $_[0]',
394 badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
395 badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
396 badnode3 => 'Lista de nodos rechazados:',
397 bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
398 bbs => 'Tu BBS es ahora \"$_[0]\"',
399 beepoff => 'Avisos sonoros desactivados',
400 beepon => 'Avisos sonoros activados',
401 call1 => 'Se encontró el indicativo vía $_[0]:',
402 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
403 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
404 conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
405 confail => 'La conexión con $_[0] ha fallado ($_[1])',
406 constart => 'Se inicia la conexión a $_[0]',
407 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
408 db1 => 'Esta base de datos está en $_[0]',
409 db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
410 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
411 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
412 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
413 db6 => 'La base de datos $_[0] ya existe, bórrala primero',
414 db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
415 db8 => 'Base de datos $_[0] creada localmente',
416 db9 => 'La base de datos $_[0] ha sido eliminada',
417 db10 => '$_[0] registros importados para la base de datos $_[1]',
418 db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
419 dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
420 dir1 => 'No hay mensajes nuevos',
421 disc1 => 'Desconectado por $_[0]',
422 disc2 => 'Canal $_[0] desconectado',
423 disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
424 disc4 => 'No existía el canal o la conexión, $_[0] se elimina',
426 dup => 'Lo siento, esto es un duplicado',
427 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
428 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
429 dx3 => 'El indicativo o la frecuencia es incorrecta',
430 dxs => 'Activada la recepción de spots de DX para $_[0]',
431 dxu => 'Desactivada la recepción de spots de DX para $_[0]',
432 e1 => 'Este comando no es válido',
433 e2 => 'Error: $_[0]',
434 e3 => '$_[0]: $_[1] no encontrado',
435 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
436 e5 => 'No estás autorizado',
437 e6 => '*** No se ha especificado una estación ***',
438 e7 => 'El indicativo $_[0] no es visible en el cluster',
439 e8 => 'Se necesita un indicativo y algún texto',
440 e9 => 'Se necesita al menos algún texto',
441 e10 => '$_[0] no se encuentra conectado',
442 e11 => 'No puedes usar tu propio $main:mycall como destino',
443 e12 => 'Se necesita el indicativo del nodo',
444 e13 => '$_[0] no es un nodo',
445 e14 => 'El primer argumento debe de ser numérico y > 0',
446 e15 => 'calificador no válido \"$_[0]\"',
447 e16 => 'El fichero \"$_[0]\" ya existe',
448 e17 => 'Por favor no uses la palabra: @_ aquí',
449 e18 => 'No se puede conectar con $_[0] ($!)',
450 e19 => 'Carácter no válido en la línea',
451 e20 => 'Símbolo $_[0] no reconocido',
452 e21 => '$_[0] no es numérico',
453 e22 => '$_[0] no es un indicativo',
454 e23 => '$_[0] fuera de rango (ej: 0/30000)',
455 e24 => 'Lo siento, el acceso a internet no está habilitado',
456 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
457 e26 => 'Demasiados errores, serás desconectado',
458 e27 => '$_[0] no es un numero o un prefijo',
459 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
460 e29 => 'Necesitas password',
461 echoon => 'Eco local activado',
462 echooff => 'Eco local desactivado',
463 echow => '*Eco local desactivado, set/echo para activarlo',
464 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
465 emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
466 email => 'La dirección E-mail es ahora: $_[0]',
467 export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
468 export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
469 export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
470 filter1 => 'Filtro $_[0] actualizado para $_[1]',
471 filter2 => 'Es necesario un valor para $_[0]',
472 filter3 => 'No hay filtros definidos para $_[0]',
473 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
474 filter5 => 'Se necesitan algunos comandos para el filtro...',
475 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
476 grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
477 gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
478 illcall => 'Lo siento, $_[0] no es un indicativo válido',
479 hasha => '$_[0] ya existe en $_[1]',
480 hashb => '$_[0] añadido a $_[1]',
481 hashc => '$_[0] eliminado desde $_[1]',
482 hashd => '$_[0] no en $_[1]',
483 hashe => '$_[0] activado $_[1]',
484 helpe1 => 'La ayuda no está disponible, comunícaselo al sysop',
485 helpe2 => 'No hay ayuda disponible para $_[0]',
486 heres => 'Se informa a la red: $_[0] está presente',
487 heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
488 hereu => 'Se informa a la red: $_[0] está ausente',
489 homebbs => 'Tu BBS es ahora: $_[0]',
490 homenode => 'Tu cluster habitual es ahora: $_[0]',
491 hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
492 hnodee2 => 'Error al definir homenode en $_[0]',
493 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
494 init1 => 'Enviado mensaje de inicialización a $_[0]',
495 iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
496 isou => 'El cluster $_[0] se pone en modo activo',
497 isoc => '$_[0] creado y definido como pasivo (Aislado)',
498 isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
499 isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
500 isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
501 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
502 l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
503 lang => 'El idioma es ahora Español',
504 lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
505 lange2 => 'fallo al seleccionar idioma en $_[0]',
506 lh1 => '$main::data/hop_table.pl no existe',
507 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
508 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
509 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
510 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
511 lockout => '$_[0] Excluido del sistema',
512 lockoutc => '$_[0] Creado y excluido del sistema',
513 lockoutun => '$_[0] autorizado para conectar',
514 lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
515 loginu => '$_[0] conecta',
516 logoutu => '$_[0] se desconecta',
517 loginn => '$_[0] conecta',
518 logoutn => '$_[0] se desconecta',
519 m1 => 'Introduce el título (máx. 30 caractéres):',
521 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
522 m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
523 m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
524 m5 => 'Lo siento, se necesita un número de mensaje',
525 m6 => 'Reenviado a: $_[0]',
526 m7 => 'Título : $_[0]',
527 m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
528 m9 => 'Hay correo nuevo para ti. Bórralo una vez leído.',
529 m10 => 'mensaje interrumpido',
530 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
531 m12 => 'mensaje nr $_[0] borrado',
532 m13 => 'mensaje nr $_[0] no encontrado',
533 m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
534 m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
535 m16 => 'Se necesita un número de mensaje',
536 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
537 msg1 => 'Cola de mensajes tipo Boletín',
538 msg2 => 'Cola de mensajes tipo Privados',
539 msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
540 msgu => 'uso: msg <cmd> <msgno> data...',
541 merge1 => 'Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]',
542 moon => 'QTH dd/mm/yyyy Salida Puesta',
543 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
544 mond => 'Activado modo monitor',
545 mone => 'Desactivado modo monitor',
546 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
547 namee2 => 'No se encuentra el usuario $_[0]!',
548 name => 'Tu nombre es \"$_[0]\"',
549 nodea => '$_[0] definido como nodo AK1A ',
550 nodeac => '$_[0] creado como nodo AK1A ',
551 nodeb => '$_[0] definido como BBS',
552 nodebc => '$_[0] creado como BBS',
553 nodec => '$_[0] definido como nodo CLX ',
554 nodecc => '$_[0] creado como nodo CLX ',
555 noder => '$_[0] definido como nodo AR-Cluster ',
556 noderc => '$_[0] creado como nodo AR-Cluster ',
557 nodes => '$_[0] definido como nodo DXSpider ',
558 nodesc => '$_[0] creado como nodo DXSpider ',
559 nodex => '$_[0] definido como nodo DXNET ',
560 nodexc => '$_[0] creado como nodo DXNET ',
561 nodeu => '$_[0] es ahora un usuario',
562 nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
563 notdone => 'No se pudo hacer',
564 nothere => 'Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde',
565 obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
566 ok => 'Operación realizada',
567 outconn => 'Iniciando conexión con $_[0]',
568 page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >',
569 pagelth => 'La longitud de las páginas es ahora $_[0]',
570 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
571 password => 'El Password ha sido definido o cambiado para $_[0]',
572 pingo => 'Iniciado el ping a $_[0]',
573 pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
574 pinge1 => 'No puedes enviarte un ping a ti mismo!',
575 pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
576 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
577 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
578 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
579 prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
580 pru => 'El Prompt vuelve a ser el normal por defecto',
581 priv => 'Nivel de privilegios está en $_[0]',
582 prx => '$main::mycall >',
583 pw0 => 'Escribe el password antiguo: ',
584 pw1 => 'Escribe el nuevo password: ',
585 pw2 => 'Confirma el nuevo password: ',
586 pw3 => 'El Password ha sido cambiado',
587 pw4 => 'Los passwords no coinciden, NO se han cambiado',
588 qll => 'Por favor introduce tu locator con set/location o set/qra',
589 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
590 qth => 'Tu QTH es ahora \"$_[0]\"',
591 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
592 qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
593 qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
594 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
595 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
596 read1 => 'Lo siento, no hay mensajes nuevos para ti',
597 read2 => 'Mensaje $_[0] no encontrado',
598 read3 => 'Mensaje $_[0] no disponible',
599 rec => '$_[0] registros',
600 reg => '$_[0] registrado',
601 regc => '$_[0] creado y registrado',
602 reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
603 regun => '$_[0] borrado',
604 route => '$_[0] en $_[1] vía $_[2]',
605 sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
606 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
607 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
608 sat4 => 'Satélites disponibles:',
609 sat5 => 'Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje',
610 satnf => 'Satélite $_[0] desconocido',
612 sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
613 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
614 sethop3 => 'No hay hops definidos para $_[0]',
615 shutting => '$main::mycall shutting down...',
616 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
617 snode1 => 'Nodo Call Sort Versión',
618 snode2 => '$_[0] $_[1] $_[2]',
619 snode3 => '$_[0] Indicativo desconocido',
620 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
621 sorry => 'Lo siento',
622 spf1 => 'spoof: creando nuevo usuario $_[0]',
623 stathf => 'Estadísticas de spots en HF de los últimos 31 días',
624 stathft => 'Estadísticas de spots en HF de los últimos 31 días para DXCC $_[0]',
625 statvhf => 'VHF+ DX Spot Stats, últimos 31 días',
626 statvhft => 'VHF+ DX Spot Stats, últimos 31 días para DXCC $_[0]',
627 statdx => 'Total DX Spots últimos 31 días',
628 sun => 'QTH dd/mm/yyyy Salida Puesta',
629 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
630 suser1 => 'uso: indicativo user_field_name valor',
631 suser2 => 'Usuario $_[0] no encontrado',
632 suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
633 suser4 => 'User field name \'$_[0]\' no existe',
634 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
635 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
636 time3 => '$_[0] $_[1]',
637 talks => 'Recepción de mensajes Talk activado para $_[0]',
638 talku => 'Recepción de mensajes Talk desactivado para $_[0]',
639 talkend => 'Finalizado modo talk contigo',
640 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
641 talknh => 'Lo siento $_[0] no está conectado en este momento',
642 talkprompt => 'Talk ($_[0])>',
643 talkstart => 'Iniciando modo talk contigo',
644 unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
645 unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
646 usernf => '*** Registro de usuario $_[0] no encontrado ***',
647 wwvs => 'Activada recepción de anuncios WWV para $_[0]',
648 wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
649 wxs => 'Activada recepción de anuncios WX para $_[0]',
650 wxu => 'Desactivada recepción de anuncios WX para $_[0]',
653 addr => 'Adresse gesetzt auf: $_[0]',
654 already => '$_[0] bereits connnected',
655 anns => 'Announce flag gesetzt auf $_[0]',
656 annu => 'Announce flag zurueckgesetzt auf $_[0]',
657 annts => 'AnnTalk flag gesetzt auf $_[0]',
658 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
659 badnode1 => '$_[0] ist nun ein bad node',
660 badnode2 => '$_[0] ist nun ein good node',
661 badnode3 => 'Liste der Bad Nodes:-',
662 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
663 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
664 beepoff => 'Beeps sind nun aus',
665 beepon => 'Beeps sind nun eingeschaltet',
666 call1 => 'Callsign lookup via $_[0]:',
667 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
668 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
669 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
670 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
671 constart => 'Verbindung zu $_[0] gestartet',
672 deluser => 'User $_[0] wurde geloescht',
673 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
674 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
675 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
676 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
677 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
678 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
679 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
680 db8 => 'Datenbank $_[0] lokal angelegt',
681 db9 => 'Datenbank $_[0] entfernt',
682 db10 => '$_[0] Datensaetze importiert in $_[1]',
683 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
684 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
685 dir1 => 'Keine Nachricht gefunden',
686 disc1 => 'Disconnected von $_[0]',
687 disc2 => 'Kanal $_[0] disconnected',
688 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
689 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
691 dup => 'Sorry, dies ist ein Duplikat',
692 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
693 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
694 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
695 dxs => 'DX Spots flag gesetzt auf $_[0]',
696 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
697 e1 => 'Ungueltiger Befehl',
698 e2 => 'Fehler: $_[0]',
699 e3 => '$_[0]: $_[1] nicht gefunden',
700 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
701 e5 => 'Nicht erlaubt',
702 e6 => '*** Keine Station angegeben ***',
703 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
704 e8 => 'Brauche ein Rufzeichen und etwas Text',
705 e9 => 'Brauche wenigstens etwas Text',
706 e10 => '$_[0] nicht lokal connected',
707 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
708 e12 => 'Brauche ein Node Rufzeichen',
709 e13 => '$_[0] ist kein Node',
710 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
711 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
712 e16 => 'Datei \"$_[0]\" existiert',
713 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
714 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
715 e19 => 'Ungueltiger Character in der Zeile',
716 e20 => 'Kuerzel $_[0] nicht erkannt',
717 e21 => '$_[0] nicht numerisch',
718 e22 => '$_[0] kein Rufzeichen',
719 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
720 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
722 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
723 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
724 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
725 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
726 e29 => 'Brauche eine Passwort',
727 echoon => 'Echo enabled',
728 echooff => 'Echo disabled',
729 echow => '*Echo ist im moment disabled, set/echo to enable',
730 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
731 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
732 email => 'E-mail Adresse gesetzt auf: $_[0]',
733 export1 => 'Gebrauch: export <msgno> <dateiname>',
734 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
735 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
736 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
737 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
738 filter3 => 'Keine Filter definiert fuer $_[0]',
739 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
740 filter5 => 'brauche ein paar Filter Kommandos...',
741 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
742 grids => 'DX Grid flag gesetzt auf $_[0]',
743 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
744 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
745 hasha => '$_[0] existiert bereits in $_[1]',
746 hashb => '$_[0] zugefuegt zu $_[1]',
747 hashc => '$_[0] entfernt von $_[1]',
748 hashd => '$_[0] nicht in $_[1]',
749 hashe => '$_[0] gesetzt auf $_[1]',
750 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
751 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
752 heres => 'Hier gesetzt auf $_[0]',
753 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
754 hereu => 'Here zurueckgesetzt auf $_[0]',
755 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
756 homenode => 'Heimat Node gesetzt auf: $_[0]',
757 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
758 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
759 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
760 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
761 iso => '$_[0] Isoliert',
762 isou => '$_[0] UnIsoliert',
763 isoc => '$_[0] erstellt und Isoliert',
764 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
765 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
766 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
767 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
768 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
769 lang => 'Sprache ist jetzt Deutch',
770 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
771 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
772 lh1 => '$main::data/hop_table.pl existiert nicht',
773 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
774 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
775 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
776 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
777 lockout => '$_[0] ausgesperrt',
778 lockoutc => '$_[0] erstellt und ausgesperrt',
779 lockoutun => '$_[0] Aussperrung aufgehoben',
780 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
781 loginu => 'User $_[0] hat eingeloggt',
782 logoutu => 'User $_[0] hat ausgeloggt',
783 loginn => 'Node $_[0] hat eingeloggt',
784 logoutn => 'Node $_[0] hat ausgeloggt',
785 m1 => 'Subjekt eingeben (30 Zeichen):',
786 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
787 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
788 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
789 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
790 m6 => 'Reply to: $_[0]',
791 m7 => 'Subject : $_[0]',
792 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
793 m9 => 'Neue Nachricht(en) fuer Dich',
794 m10 => 'Nachricht abgebrochen',
795 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
796 m12 => 'Nachricht Nr. $_[0] geloescht',
797 m13 => 'Nachricht Nr. $_[0] fehlt',
798 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
799 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
800 m16 => 'Brauche eine Nachrichten Nummer',
801 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
802 msg1 => 'Bulletin Nachrichten aufgeschoben',
803 msg2 => 'Private Nachrichten aufgeschoben',
804 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
805 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
806 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
807 moon => 'Standort dd/mm/yyyy Rise Set',
808 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
809 mond => 'Ueberwachung Disabled',
810 mone => 'Ueberwachung Enabled',
811 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
812 namee2 => 'Kann User $_[0]nicht finden!',
813 name => 'Dein Name ist jetzt \"$_[0]\"',
814 nodea => '$_[0] gesetzt als AK1A style Node',
815 nodeac => '$_[0] erstellt als AK1A style Node',
816 nodeb => '$_[0] gesetzt als BBS',
817 nodebc => '$_[0] erstellt als BBS',
818 nodec => '$_[0] gesetzt als CLX style Node',
819 nodecc => '$_[0] erstellt als CLX style Node',
820 noder => '$_[0] gesetzt als AR-Cluster style Node',
821 noderc => '$_[0] erstellt als AR-Cluster style Node',
822 nodes => '$_[0] gesetzt als DXSpider style Node',
823 nodesc => '$_[0] erstellt als DXSpider style Node',
824 nodex => '$_[0] gesetzt als DXNET style Node',
825 nodexc => '$_[0] erstellt als DXNET style Node',
826 nodeu => '$_[0] zurueckgesetzt als ein User',
827 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
828 notdone => 'Nicht ausgefuehrt',
829 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
830 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
831 ok => 'Operation erfolgreich',
832 outconn => 'Outstanding connect to $_[0]',
833 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
834 pagelth => 'Seitenlaenge ist nun $_[0]',
835 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
836 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
837 passwordu => 'Passwort geloescht fuer $_[0]',
838 pingo => 'Ping Started to $_[0]',
839 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
840 pinge1 => 'Cannot ping yourself!',
841 pingint => 'Ping interval on $_[0] set to $_[1] secs',
842 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
843 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
844 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
845 priv => 'Priviligierten Level geaendert auf $_[0]',
846 prx => '$main::mycall >',
847 pw0 => 'Altes Passwort eingeben: ',
848 pw1 => 'Neues Passwort eingeben: ',
849 pw2 => 'Wiederhole neues Passwort: ',
850 pw3 => 'Passwort geaendert',
851 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
852 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
853 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
854 qth => 'Dein QTH ist nun \"$_[0]\"',
855 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
856 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
857 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
858 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
859 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
860 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
861 read2 => 'Msg $_[0] nicht gefunden',
862 read3 => 'Msg $_[0] nicht verfuegbar',
863 rec => '$_[0] records',
864 reg => '$_[0] registriert',
865 regc => '$_[0] erstellt und registriert',
866 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
867 regun => '$_[0] unregistriert',
868 route => '$_[0] auf $_[1] via $_[2]',
869 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
870 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
871 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
872 sat4 => 'Satelliten verfuegbar:-',
873 satnf => 'Satellit $_[0] unbekannt',
875 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
876 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
877 sethop3 => 'Keine hops gesetzt fuer $_[0]',
878 shutting => '$main::mycall shutting down...',
879 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
880 snode1 => 'Node Call Sort Version',
881 snode2 => '$_[0] $_[1] $_[2]',
882 snode3 => '$_[0] Unbekanntes Rufzeichen',
883 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
885 spf1 => 'spoof: erzeuge neuen User $_[0]',
886 stathf => 'HF DX Spot Stats, letzte 31 Tage',
887 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
888 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
889 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
890 statdx => 'Total DX Spots letzte 31 Tage',
891 sun => 'Location dd/mm/yyyy Rise Set',
892 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
893 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
894 suser2 => 'User $_[0] nicht gefunden',
895 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
896 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
897 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
898 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
899 time3 => '$_[0] $_[1]',
900 talks => 'Talk flag gesetzt auf $_[0]',
901 talku => 'Talk flag zurueckgesetzt auf $_[0]',
902 talkend => 'Beendet Talk zu Dir',
903 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
904 talknh => 'Sorry $_[0] ist im moment nicht online',
905 talkprompt => 'Talk ($_[0])>',
906 talkstart => 'Startet Talkmode zu Dir',
907 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
908 wwvs => 'WWV flag gesetzt auf $_[0]',
909 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
910 wxs => 'WX flag gesetzt auf $_[0]',
911 wxu => 'WX flag zurueckgesetzt auf $_[0]',
914 addr => 'Indirizzo impostato a: $_[0]',
915 already => '$_[0] e\' connesso',
916 anns => 'Annunci attivati alle_[0]',
917 annu => 'Annunci disattivati alle $_[0]',
918 annts => 'Talk attivato alle $_[0]',
919 anntu => 'Talk disattivato alle $_[0]',
920 badnode1 => '$_[0] e\' un nodo disabilitato',
921 badnode2 => '$_[0] e\' un nodo attivo',
922 badnode3 => 'Lista dei nodi disabilitati:-',
923 bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
924 bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
925 beepoff => 'I beep sono disattivati',
926 beepon => 'I beep sono attivati',
927 call1 => 'Ricerca del nominativo via $_[0]:',
928 conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
929 concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
930 conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
931 confail => 'connessione a $_[0] fallita ($_[1])',
932 constart => 'connessione a $_[0] iniziata',
933 deluser => 'L\'utente $_[0] e\' stato eliminato',
934 db1 => 'Questo database e\' presso $_[0]',
935 db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
936 db3 => 'Spiacente, il database $_[0] non esiste qui',
937 db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
938 db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
939 db6 => 'Il database $_[0] esiste già, cancellalo prima',
940 db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
941 db8 => 'Il database $_[0] e\' stato creato localmente',
942 db9 => 'Il database $_[0] e\' stato eliminato',
943 db10 => '$_[0] record importati in $_[1]',
944 db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
945 dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
946 dir1 => 'Nessun messaggio trovato',
947 disc1 => 'Disconnesso da $_[0]',
948 disc2 => 'Canalew $_[0] disconnesso',
949 disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
950 disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
952 dup => 'Spiacente, questo e\' un doppione',
953 dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
954 dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
955 dx3 => 'Il nominativo o la frequenza sono errati',
956 dxs => 'DX Spots attivati alle $_[0]',
957 dxu => 'DX Spots disattivati alle $_[0]',
958 e1 => 'Comando errato',
959 e2 => 'Errore: $_[0]',
960 e3 => '$_[0]: $_[1] non trovato',
961 e4 => 'Inserire un prefisso o un nominativo',
962 e5 => 'Non permesso',
963 e6 => '*** Nessuna stazione specificata ***',
964 e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
965 e8 => 'Inserire un nominativo o del testo',
966 e9 => 'Inserire del testo',
967 e10 => '$_[0] non connesso localmente',
968 e11 => 'Impossibile usare $main:mycall come destinazione',
969 e12 => 'Inserire il nominativo di un nodo',
970 e13 => '$_[0] non e\' un nodo',
971 e14 => 'Il primo argomento deve essere numerico e > 0',
972 e15 => 'qualificatore non valido \"$_[0]\"',
973 e16 => 'Il file \"$_[0]\" esiste',
974 e17 => 'Non usare le parole: @_ qui',
975 e18 => 'Impossibile connettere $_[0] ($!)',
976 e19 => 'Carattere non valido nella linea',
977 e20 => 'separatore $_[0] non riconosciuto',
978 e21 => '$_[0] non e\' numerico',
979 e22 => '$_[0] non e\' un nominativo',
980 e23 => '$_[0] non e\' un intervallo (es 0/30000)',
981 e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
982 e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
983 e26 => 'Troppi errori, stai per essere disconnesso',
984 e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
985 e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
986 e29 => 'E\' necessaria una password',
988 echoon => 'Echo abilitato',
989 echooff => 'Echo disabilitato',
990 echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
991 emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
992 emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
993 email => 'Indirizzo email impostato a: $_[0]',
994 export1 => 'sintassi: export <num_mess> <nome_file>',
995 export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
996 export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
997 filter1 => 'Filtro $_[0] aggiornato per $_[1]',
998 filter2 => 'Chiave sconosciuta per il filtro $_[0]',
999 filter3 => 'Nessun filtro definito per $_[0]',
1000 filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
1001 filter5 => 'necessito qualche comando per i filtri...',
1002 filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
1003 grids => 'DX Grid attivato alle $_[0]',
1004 gridu => 'DX Grid disattivato alle $_[0]',
1005 illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
1006 hasha => '$_[0] già esiste $_[1]',
1007 hashb => '$_[0] aggiunto a $_[1]',
1008 hashc => '$_[0] rimosso da $_[1]',
1009 hashd => '$_[0] non in $_[1]',
1010 hashe => '$_[0] impostato a $_[1]',
1011 helpe1 => 'Aiuto non disponibile, contatta il sysop',
1012 helpe2 => 'Nessun aiuto per $_[0]',
1013 heres => 'Here abilitato per $_[0]',
1014 heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
1015 hereu => 'Here disattivato per $_[0]',
1016 homebbs => 'Home BBS impostata a: $_[0]',
1017 homenode => 'Home Node impostato a: $_[0]',
1018 hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
1019 hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
1020 hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
1021 init1 => 'inizializzaione inviata a $_[0]',
1022 iso => '$_[0] Isolato',
1023 isou => '$_[0] non Isolato',
1024 isoc => '$_[0] creato ed isolato',
1025 isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
1026 isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
1027 isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
1028 l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
1029 l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
1030 lang => 'La lingua selezionata e\' adesso Italiano',
1031 lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
1032 lange2 => 'impostazione lingua fallita per $_[0]',
1033 lh1 => '$main::data/hop_table.pl non esiste',
1034 loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
1035 loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
1036 loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
1037 loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
1038 lockout => '$_[0] Bloccato',
1039 lockoutc => '$_[0] Creato e bloccato',
1040 lockoutun => '$_[0] Sbloccato',
1041 lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
1042 loginu => 'L\'utente $_[0] e\' entrato nel cluster',
1043 logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
1044 loginn => 'Il nodo $_[0] si e\' connesso',
1045 logoutn => 'Il nodo $_[0] si e\' disconnesso',
1046 m1 => 'Inserisci il Soggetto (30 caratteri):',
1047 m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
1048 m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
1049 m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
1050 m5 => 'Spiacente, ho bisogno del numero di un messaggio',
1051 m6 => 'Rispondi a: $_[0]',
1052 m7 => 'Soggetto : $_[0]',
1053 m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
1054 m9 => 'Nuovi messaggi sono arrivati per te',
1055 m10 => 'Messaggio abortito',
1056 m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
1057 m12 => 'Il messaggio $_[0] e\' stato cancellato',
1058 m13 => 'Il messaggio $_[0] non esiste',
1059 m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
1060 m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
1061 m16 => 'Specificare il numero del messaggio',
1062 m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
1063 msg1 => 'Bollettino messo in coda',
1064 msg2 => 'Messaggio messo in coda',
1065 msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
1066 msgu => 'sintassi: msg <comando> <num_mess> dati...',
1067 merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
1068 moon => 'Localita gg/mm/aaaa Alba Tramonto',
1069 moon_with_azel => 'Località
1070 gg/mm/aaaa Alba Tramonto Azim Elev',
1071 mond => 'Monitor disabilitato',
1072 mone => 'Monitor abilitato',
1073 namee1 => 'Per favore inserisci con set/name <nome>',
1074 namee2 => 'Impossibile trovare l\'utente $_[0]!',
1075 name => 'Il tuo nome ora e\' \"$_[0]\"',
1076 nodea => '$_[0] impostato come nodo stile AK1A',
1077 nodeac => '$_[0] creato come nodo stile AK1A',
1078 nodeb => '$_[0] impostato come BBS',
1079 nodebc => '$_[0] creato come BBS',
1080 nodec => '$_[0] impostato come nodo stile CLX',
1081 nodecc => '$_[0] creato come nodo stile CLX',
1082 noder => '$_[0] impostato come nodo stile AR-Cluster',
1083 noderc => '$_[0] creato come nodo stile AR-Cluster',
1084 nodes => '$_[0] impostato come nodo stile DXSpider',
1085 nodesc => '$_[0] creato come nodo stile DXSpider',
1086 nodex => '$_[0] impostato come nodo stile DXNET',
1087 nodexc => '$_[0] creato come nodo stile DXNET',
1088 nodeu => '$_[0] impostato come utente',
1089 nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
1090 notdone => 'Non eseguito',
1091 nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
1092 obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
1093 ok => 'Operazione eseguita con successo',
1094 outconn => 'Connessione in corso per $_[0]',
1095 page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
1096 pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
1097 passerr => 'sintassi: SET/PASS <password> <nominativo>',
1098 password => 'Password impostata o cambiata per $_[0]',
1099 passwordu => 'Password rimossa per $_[0]',
1100 pingo => 'Ping mandato a $_[0]',
1101 pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
1102 pinge1 => 'Non puoi far un ping su te stesso!',
1103 pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
1104 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
1105 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1106 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1107 priv => 'Privilegi cambiati per $_[0]',
1108 prs => 'Prompt impostato a \"$_[0]\"',
1109 pru => 'Prompt reimpostato al predefinito',
1110 prx => '$main::mycall >',
1111 pw0 => 'Inserisci la vecchia password: ',
1112 pw1 => 'Inserisci la nuova password: ',
1113 pw2 => 'Reinserisci la nuova password: ',
1114 pw3 => 'Password modificata',
1115 pw4 => 'Le password sono differenti, password NON cambiata',
1116 qll => 'Per favore inserisci la tua località con set/location o set/qra',
1117 qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
1118 qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
1119 qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
1120 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
1121 qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
1122 qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
1123 rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
1124 rec => '$_[0] records',
1125 read1 => 'Spiacente, non ci sono nuovi messaggi per te',
1126 read2 => 'Messaggio $_[0] non trovato',
1127 read3 => 'Messaggio $_[0] non disponibile',
1128 rec => '$_[0] records',
1129 reg => '$_[0] registrato',
1130 regc => '$_[0] creato e registrato',
1131 reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
1132 regun => '$_[0] deregistrato',
1133 route => '$_[0] su $_[1] via $_[2]',
1134 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
1135 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
1136 sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
1137 sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
1138 sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
1139 satnf => 'Satellite $_[0] sconosciuto',
1141 sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
1142 sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
1143 sethop3 => 'Nessun salto impostato per $_[0]',
1144 shutting => '$main::mycall si sta arrestando...',
1145 sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
1146 snode1 => 'Nodo Nominativo Ordine Versione',
1147 snode2 => '$_[0] $_[1] $_[2]',
1148 snode3 => '$_[0] Nominativo sconosciuto',
1149 sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
1150 sorry => 'Spiacente',
1151 spf1 => 'spoof: sto creando il nuovo utente $_[0]',
1152 stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
1153 stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
1154 statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
1155 statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
1156 statdx => 'Totale DX Spots degli ultimi 31 giorni',
1157 sun => 'Località gg/mm/aaaa Alba Tramonto',
1158 sun_with_azel => 'Località
1159 gg/mm/aaaa Alba Tramonto Azim Elev',
1161 suser1 => 'sintassi: nominatio campo_utente valore',
1162 suser2 => 'Utente $_[0] non trovato',
1163 suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
1164 suser4 => 'Il campo utente \'$_[0]\' non esiste',
1165 time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
1166 time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
1167 time3 => '$_[0] $_[1]',
1168 talks => 'Talk abilitato per $_[0]',
1169 talku => 'Talk disabilitato per $_[0]',
1170 talkend => 'Chiude il la conversazione con te',
1171 talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
1172 talknh => 'Spiaente $_[0] non e\' collegato al momento',
1173 talkprompt => 'Talk ($_[0])>',
1174 talkstart => 'Inizia una conversazione con te',
1175 unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
1176 unsethop2 => 'salti eliminati su $_[1] per $_[0]',
1177 usernf => '*** Record utente per $_[0] non trovato ***',
1178 wcy1 => '$_[0] manca o e\' fuori limite',
1179 wcy2 => 'WCY duplicato',
1180 wwv1 => '$_[0] manca o e\' fuori limite',
1181 wwv2 => 'WWV duplicato',
1182 wwvs => 'WWV abilitati per $_[0]',
1183 wwvu => 'WWV disabilitati per $_[0]',
1184 wxs => 'WX abilitati per $_[0]',
1185 wxu => 'WX disabilitati per $_[0]',
projects / spider.git / blob