3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 badnode1 => '$_[0] is now a bad node',
18 badnode2 => '$_[0] is now a good node',
19 badnode3 => 'List of Bad Nodes:-',
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
21 bbs => 'Your BBS Address is now \"$_[0]\"',
22 beepoff => 'Beeps are now off',
23 beepon => 'Beeps are now on',
24 call1 => 'Callsign lookup via $_[0]:',
25 conother => 'Sorry $_[0] you are connected to me on another port',
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
28 confail => 'connection to $_[0] failed ($_[1])',
29 constart => 'connection to $_[0] started',
30 deluser => 'User $_[0] has been deleted',
31 db1 => 'This database is hosted at $_[0]',
32 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
33 db3 => 'Sorry, database $_[0] doesn\'t exist here',
34 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
35 db5 => 'Accessing remote database on $_[0]...standby...',
36 db6 => 'Database $_[0] already exists, delete it first',
37 db7 => 'Database $_[0] created for remote node $_[1]',
38 db8 => 'Database $_[0] created locally',
39 db9 => 'Database $_[0] removed',
40 db10 => '$_[0] records imported into $_[1]',
41 db11 => 'Sending your request(s) to $_[0], please stand by...',
42 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
43 disc1 => 'Disconnected by $_[0]',
44 disc2 => 'Channel $_[0] disconnected',
45 disc3 => 'No Channel, but connection $_[0] disconnected',
46 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
48 dup => 'Sorry, this is a duplicate',
49 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
50 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
51 dx3 => 'The callsign or frequency is invalid',
52 dxs => 'DX Spots flag set on $_[0]',
53 dxu => 'DX Spots flag unset on $_[0]',
54 e1 => 'Invalid command',
56 e3 => '$_[0]: $_[1] not found',
57 e4 => 'Need at least a prefix or callsign',
59 e6 => '*** No station specified ***',
60 e7 => 'callsign $_[0] not visible on the cluster',
61 e8 => 'Need a callsign and some text',
62 e9 => 'Need at least some text',
63 e10 => '$_[0] not connected locally',
64 e11 => 'Can\'t use $main:mycall as target',
65 e12 => 'Need a node callsign',
66 e13 => '$_[0] is not a node',
67 e14 => 'First argument must be numeric and > 0',
68 e15 => 'invalid qualifier \"$_[0]\"',
69 e16 => 'File \"$_[0]\" exists',
70 e17 => 'Please don\'t use the words: @_ on here',
71 e18 => 'Cannot connect to $_[0] ($!)',
72 e19 => 'Invalid character in line',
73 e20 => 'token $_[0] not recognised',
74 e21 => '$_[0] not numeric',
75 e22 => '$_[0] not a callsign',
76 e23 => '$_[0] not a range (eg 0/30000)',
77 e24 => 'Sorry, Internet access is not enabled',
78 e25 => 'Sorry the value must be between $_[0] and $_[1]',
79 e26 => 'Too many concurrent errors, you are being disconnected',
80 e27 => '$_[0] not a numeric or a callsign prefix',
82 echoon => 'Echoing enabled',
83 echooff => 'Echoing disabled',
84 echow => '*Echoing is currently disabled, set/echo to enable',
85 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
86 emaila => 'Your E-Mail Address is now \"$_[0]\"',
87 email => 'E-mail address set to: $_[0]',
88 export1 => 'usage: export <msgno> <filename>',
89 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
90 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
91 filter1 => 'Filter $_[0] updated for $_[1]',
92 filter2 => 'Unknown filter keyword $_[0]',
93 filter3 => 'No filters defined for $_[0]',
94 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
95 filter5 => 'need some filter commands...',
96 filter6 => '$_[0]$_[1] Filter for $[2] not found',
97 grids => 'DX Grid flag set on $_[0]',
98 gridu => 'DX Grid flag unset on $_[0]',
99 hasha => '$_[0] already exists in $_[1]',
100 hashb => '$_[0] added to $_[1]',
101 hashc => '$_[0] removed from $_[1]',
102 hashd => '$_[0] not in $_[1]',
103 hashe => '$_[0] set on $_[1]',
104 helpe1 => 'Help system unavailable, tell sysop',
105 helpe2 => 'No help available on $_[0]',
106 heres => 'Here set on $_[0]',
107 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
108 hereu => 'Here unset on $_[0]',
109 homebbs => 'Home BBS set to: $_[0]',
110 homenode => 'Home Node set to: $_[0]',
111 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
112 hnodee2 => 'Failed to set homenode on $_[0]',
113 hnode => 'Your Homenode is now \"$_[0]\"',
114 init1 => 'sent initialisation message to $_[0]',
115 iso => '$_[0] Isolated',
116 isou => '$_[0] UnIsolated',
117 isoc => '$_[0] created and Isolated',
118 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
119 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
120 isow => '$_[0] is isolated; unset/isolate $_[0] first',
121 l1 => 'Sorry $_[0], you are already logged on on another channel',
122 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
123 lang => 'Language is now $_[0]',
124 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
125 lange2 => 'failed to set language on $_[0]',
126 lh1 => '$main::data/hop_table.pl doesn\'t exist',
127 loce1 => 'Please enter your location,, set/location <latitude longitude>',
128 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
129 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
130 loc => 'Your Lat/Long is now \"$_[0]\"',
131 lockout => '$_[0] Locked out',
132 lockoutc => '$_[0] Created and Locked out',
133 lockoutun => '$_[0] Unlocked',
134 loginu => 'User $_[0] has logged in',
135 logoutu => 'User $_[0] has logged out',
136 loginn => 'Node $_[0] has logged in',
137 logoutn => 'Node $_[0] has logged out',
138 m1 => 'Enter Subject (30 characters):',
139 m2 => 'Copy of msg $_[0] sent to $_[1]',
140 m3 => 'Sorry, $_[0] is an unacceptable TO address',
141 m4 => 'Sorry, can\'t access message $_[0]',
142 m5 => 'Sorry, I need a message number',
143 m6 => 'Reply to: $_[0]',
144 m7 => 'Subject : $_[0]',
145 m8 => 'Enter Message /EX to send or /ABORT to exit',
146 m9 => 'New mail has arrived for you',
147 m10 => 'Message Aborted',
148 m11 => 'Message no $_[0] saved and directed to $_[1]',
149 m12 => 'Message no $_[0] deleted',
150 m13 => 'Message no $_[0] missing',
151 m14 => 'Message no $_[0] marked as sent to $_[1]',
152 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
153 m16 => 'Need a Message number',
154 m17 => 'Sorry, cannot send messages in $_[0] mode',
155 msg1 => 'Bulletin Messages Queued',
156 msg2 => 'Private Messages Queued',
157 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
158 msgu => 'usage: msg <cmd> <msgno> data...',
159 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
160 moon => 'Location Rise Set Azim Elev RGain dB',
161 mond => 'Monitoring Disabled',
162 mone => 'Monitoring Enabled',
163 namee1 => 'Please enter your name, set/name <your name>',
164 namee2 => 'Can\'t find user $_[0]!',
165 name => 'Your name is now \"$_[0]\"',
166 nodea => '$_[0] set as AK1A style Node',
167 nodeac => '$_[0] created as AK1A style Node',
168 nodeb => '$_[0] set as BBS',
169 nodebc => '$_[0] created as BBS',
170 nodec => '$_[0] set as CLX style Node',
171 nodecc => '$_[0] created as CLX style Node',
172 noder => '$_[0] set as AR-Cluster style Node',
173 noderc => '$_[0] created as AR-Cluster style Node',
174 nodes => '$_[0] set as DXSpider style Node',
175 nodesc => '$_[0] created as DXSpider style Node',
176 nodex => '$_[0] set as DXNET style Node',
177 nodexc => '$_[0] created as DXNET style Node',
178 nodeu => '$_[0] set back as a User',
179 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
180 notdone => 'NOT Done',
181 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
182 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
183 ok => 'Operation successful',
184 outconn => 'Outstanding connect to $_[0]',
185 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
186 pagelth => 'Page Length is now $_[0]',
187 passerr => 'Please use: SET/PASS <password> <callsign>',
188 password => 'Password set or changed for $_[0]',
189 pingo => 'Ping Started to $_[0]',
190 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
191 pinge1 => 'Cannot ping yourself!',
192 pingint => 'Ping interval on $_[0] set to $_[1] secs',
193 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
194 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
195 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
196 priv => 'Privilege level changed on $_[0]',
197 prx => '$main::mycall >',
198 qll => 'Please enter your location with set/location or set/qra',
199 qthe1 => 'Please enter your QTH, set/qth <your qth>',
200 qth => 'Your QTH is now \"$_[0]\"',
201 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
202 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
203 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
204 qra => 'Your QRA Locator is now \"$_[0]\"',
205 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
206 rec => '$_[0] records',
207 read1 => 'Sorry, no new messages for you',
208 read2 => 'Msg $_[0] not found',
209 read3 => 'Msg $_[0] not available',
210 route => '$_[0] on $_[1] via $_[2]',
211 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
212 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
213 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
214 sat4 => 'Satellites available:-',
215 satnf => 'Satellite $_[0] unknown',
217 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
218 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
219 sethop3 => 'No hops set for $_[0]',
220 shutting => '$main::mycall shutting down...',
221 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
222 snode1 => 'Node Call Sort Version',
223 snode2 => '$_[0] $_[1] $_[2]',
224 snode3 => '$_[0] Unknown Call',
225 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
227 spf1 => 'spoof: creating new user $_[0]',
228 stathf => 'HF DX Spot Stats, last 31 days',
229 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
230 statvhf => 'VHF+ DX Spot Stats, last 31 days',
231 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
232 statdx => 'Total DX Spots last 31 days',
233 sun => 'Location Rise Set Azim Elev',
234 suser1 => 'usage: callsign user_field_name value',
235 suser2 => 'User $_[0] not found',
236 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
237 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
238 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
239 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
240 time3 => '$_[0] $_[1]',
241 talks => 'Talk flag set on $_[0]',
242 talku => 'Talk flag unset on $_[0]',
243 talkend => 'Finished talking to you',
244 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
245 talknh => 'Sorry $_[0] is not online at the moment',
246 talkprompt => 'Talk ($_[0])>',
247 talkstart => 'Starting talking to you',
248 usernf => '*** User record for $_[0] not found ***',
249 wwvs => 'WWV flag set on $_[0]',
250 wwvu => 'WWV flag unset on $_[0]',
251 wxs => 'WX flag set on $_[0]',
252 wxu => 'WX flag unset on $_[0]',
255 addr => 'Addres gezet op: $_[0]',
256 already => '$_[0] reeds geconnect',
257 anns => 'Announce berichten AAN gezet voor $_[0]',
258 annu => 'Announce berichten UIT gezet voor $_[0]',
259 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
260 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
261 beepoff => 'De beep staat nu UIT',
262 beepon => 'De beep staat nu AAN',
263 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
264 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
265 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
266 confail => 'Verbinding met $_[0] mislukt ($_[1])',
267 constart => 'Verbinding met $_[0] gestart',
268 disc1 => 'Gedisconnect door $_[0]',
269 disc2 => '$_[0] gedisconnect',
270 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
271 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
272 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
273 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
274 e1 => 'Ongeldige opdracht',
276 e3 => '$_[0]: $_[1] niet gevonden',
277 e4 => 'Minimaal een prefix of een call nodig',
278 e5 => 'Niet toegestaan',
279 e6 => '*** Geen station gespecifiseerd ***',
280 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
281 e8 => 'Ik heb een call en tekst nodig',
282 e9 => 'Ik heb wel tekst nodig voor een announce!',
283 e10 => '$_[0] is niet lokaal verbonden',
284 e12 => 'Ik heb een node call nodig',
285 e13 => '$_[0] is geen node',
286 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
287 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
288 email => 'E-mail addres gezet op: $_[0]',
289 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
290 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
291 heres => 'Aanwezigheid AAN gezet voor $_[0]',
292 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
293 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
294 homebbs => 'Uw Home mailbox is nu $_[0]',
295 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
296 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
297 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
298 iso => '$_[0] is geisoleerd (Isolated)',
299 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
300 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
301 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
302 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
303 lh1 => '$main::data/hop_table.pl bestaat niet',
304 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
305 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
306 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
307 lockout => '$_[0] heeft geen toegang meer (Locked out)',
308 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
309 m2 => '$_[0] Informatie: $_[1]',
310 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
311 msgnew => 'Er is nieuwe post gearriveerd voor u',
312 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
313 namee2 => 'Gebruiker $_[0] niet te vinden!',
314 name => 'Uw naam is gezet op \"$_[0]\"',
315 node => '$_[0] gezet als een AK1A stijl DX-cluster',
316 nodeu => '$_[0] teruggezet naar gebruiker status',
317 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
318 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
319 ok => 'Opdracht succesvol uitgevoerd',
320 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
321 pagelth => 'Paginalengte gezet op ($_[0]) regels',
322 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
323 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
324 pingo => 'Ping gestart naar $_[0]',
325 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
326 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
327 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
328 priv => 'Privilege level gewijzigd op $_[0]',
329 prx => '$main::mycall >',
330 qll => 'Geef uw locator met set/location of set/qra',
331 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
332 qth => 'Uw QTH is nu \"$_[0]\"',
333 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
334 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
335 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
336 qra => 'Uw QRA Locator is nu \"$_[0]\"',
337 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
338 read1 => 'Sorry, geen berichten voor u',
339 read2 => 'Bericht $_[0] niet gevonden',
340 read3 => 'Bericht $_[0] niet beschikbaar',
341 shutting => '$main::mycall gaat QRT...',
342 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
343 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
344 talks => 'Talk berichten AAN gezet voor $_[0]',
345 talku => 'Talk berichten UIT gezet voor $_[0]',
346 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
347 wwvs => 'WWV berichten AAN gezet voor $_[0]',
348 wwvu => 'WWV berichten UIT gezet voor $_[0]',
349 wxs => 'WX berichten AAN gezet voor $_[0]',
350 wxu => 'WX berichten UIT gezet voor $_[0]',
357 addr => 'Dirección es ahora: $_[0]',
358 already => '$_[0] ya esta conctado',
359 anns => 'Anuncios activados $_[0]',
360 annu => 'Anuncios desactivados $_[0]',
361 badnode1 => '$_[0] es ahora un nodo indeseado',
362 badnode2 => '$_[0] es ahora un nodo normal',
363 badnode3 => 'Lista de nodos indeseados:-',
364 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
365 bbs => 'Tu BBS es ahora \"$_[0]\"',
366 beepoff => 'Beeps desactivados',
367 beepon => 'Beeps activados',
368 call1 => 'Callsign lookup via $_[0]:',
369 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
370 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
371 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
372 confail => 'conexión con $_[0] fallida ($_[1])',
373 constart => 'conexión con $_[0] ha comenzado',
374 disc1 => 'Desconectado por $_[0]',
375 disc2 => '$_[0] desconectado',
376 disc3 => 'No Channel, but connection $_[0] disconnected',
377 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
378 db1 => 'Esta base de datos está en $_[0]',
379 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
380 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
381 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
382 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
383 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
384 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
385 db8 => 'Base de datos $_[0] creada localmente',
386 db9 => 'Base de datos $_[0] borrada',
387 db10 => '$_[0] records imported into $_[1]',
388 db11 => 'Petición enviada a $_[0], por favor espera...',
389 dfreq1 => 'Frecuencia invalida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
390 dup => 'Lo siento, esto es un duplicado',
391 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
392 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
393 dxs => 'DX Spots activado $_[0]',
394 dxu => 'DX Spots desactivado $_[0]',
395 e1 => 'Comando inválido',
396 e2 => 'Error: $_[0]',
397 e3 => '$_[0]: $_[1] no encontrado',
398 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
399 e5 => 'No permitido',
400 e6 => '*** No se ha especificado una estación ***',
401 e7 => 'indicativo $_[0] no visible en el cluster',
402 e8 => 'Se necesita un indicativo y algo de texto',
403 e9 => 'Se necesita al menos algo de texto',
404 e10 => '$_[0] no conectado en local',
405 e11 => 'Can\'t use $main:mycall as target',
406 e12 => 'Se necesita el indicativo del nodo',
407 e13 => '$_[0] no es un nodo',
408 e14 => 'El primer argumento debe de ser mumérico y > 0',
409 e15 => 'cualificador no válido \"$_[0]\"',
410 e16 => 'El fichero \"$_[0]\" ya existe',
411 e17 => 'Por favor no uses la palabra: @_ aqui',
412 e18 => 'No se puede conectar con $_[0] ($!)',
413 e19 => 'Caracter inválido en la linea',
414 e20 => 'señal $_[0] no reconocido',
415 e21 => '$_[0] no numérico',
416 e22 => '$_[0] no es un indicativo',
417 e23 => '$_[0] fuera de rango (ej: 0/30000)',
418 e24 => 'Lo siento, el acceso a internet no está habilitado',
419 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
420 e26 => 'Demasiados errores, seras desconectado',
421 echoon => 'Habilitado eco',
422 echooff => 'Deshabilitado eco',
423 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
424 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
425 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
426 email => 'E-mail es ahora: $_[0]',
427 export1 => 'usa: export <msgno> <filename>',
428 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
429 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
430 filter1 => 'Filtro $_[0] actualizado para $_[1]',
431 filter2 => 'Necesito un valor para $_[0]',
432 filter3 => 'No hay filtros definidos para $_[0]',
433 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
434 filter5 => 'necesito algunos camandos para el filtro...',
435 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
436 grids => 'DX Grid está activado $_[0]',
437 gridu => 'DX Grid está desavtivado $_[0]',
438 hasha => '$_[0] ya existe en $_[1]',
439 hashb => '$_[0] añadido a $_[1]',
440 hashc => '$_[0] eliminado desde $_[1]',
441 hashd => '$_[0] no en $_[1]',
442 hashe => '$_[0] activado $_[1]',
443 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
444 helpe2 => 'No hay ayuda disponible en $_[0]',
445 heres => 'Estas presente $_[0]',
446 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
447 hereu => 'Estas ausente $_[0]',
448 homebbs => 'Tu BBS es ahora: $_[0]',
449 homenode => 'Tu Nodo habitual es ahora: $_[0]',
450 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
451 hnodee2 => 'Fallo al poner homenode en $_[0]',
452 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
453 init1 => 'enviando mensaje de inicialización a $_[0]',
454 iso => '$_[0] Aislado',
455 isou => '$_[0] en red',
456 isoc => '$_[0] creado y aislado',
457 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
458 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
459 lang => 'El idioma es ahora $_[0]',
460 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
461 lange2 => 'fallo al poner idioma en $_[0]',
462 lh1 => '$main::data/hop_table.pl no existe',
463 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
464 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
465 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
466 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
467 lockout => '$_[0] Boloqueado',
468 lockoutc => '$_[0] Creado y bloqueado',
469 lockoutun => '$_[0] Desbloqueado',
470 loginu => 'Usuario $_[0] conectado',
471 logoutu => 'Usuario $_[0] desconectado',
472 loginn => 'Nodo $_[0] conectado',
473 logoutn => 'Nodo $_[0] desconectado',
474 m1 => 'Introduce título (30 caracteres):',
475 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
476 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
477 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
478 m5 => 'Lo siento, se necesita un número de mensaje',
479 m6 => 'Reenviado a: $_[0]',
480 m7 => 'Título : $_[0]',
481 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
482 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
483 m10 => 'mensaje interrumpido',
484 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
485 m12 => 'mensaje nr $_[0] borrado',
486 m13 => 'mensaje nr $_[0] no encontrado',
487 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
488 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
489 m16 => 'Necesito un número de mensaje',
490 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
491 msg1 => 'Bulletin Messages Queued',
492 msg2 => 'Private Messages Queued',
493 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
494 msgu => 'usa: msg <cmd> <msgno> data...',
495 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
496 moon => 'QTH Salida Puesta Azim Elev RGain dB',
497 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
498 namee2 => 'No se encuentra el usuario $_[0]!',
499 name => 'Tu nombre es ahora \"$_[0]\"',
500 nodea => '$_[0] fijado como nodo AK1A ',
501 nodeac => '$_[0] creado como nodo AK1A ',
502 nodeb => '$_[0] fijado como BBS',
503 nodebc => '$_[0] creado como BBS',
504 nodec => '$_[0] fijado como nodo CLX ',
505 nodecc => '$_[0] creado como nodo CLX ',
506 noder => '$_[0] fijado como nodo AR-Cluster ',
507 noderc => '$_[0] creado como nodo AR-Cluster ',
508 nodes => '$_[0] fijado como nodo DXSpider ',
509 nodesc => '$_[0] creado como nodo DXSpider ',
510 nodex => '$_[0] fijado como nodo DXNET ',
511 nodexc => '$_[0] creado como nodo DXNET ',
512 nodeu => '$_[0] es ahora un usuario',
513 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
514 notdone => 'NO se pudo hacer',
515 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
516 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
517 ok => 'Operación realizada',
518 outconn => 'Iniciando conexion con $_[0]',
519 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
520 pagelth => 'La longitud de las páginas es ahora $_[0]',
521 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
522 password => 'Password ajustado o cambiado para $_[0]',
523 pingo => 'Iniciado el ping a $_[0]',
524 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
525 pinge1 => 'No puedes enviarte un ping a ti mismo!',
526 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
527 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
528 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
529 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
530 priv => 'Nivel de privilegios en $_[0]',
531 prx => '$main::mycall >',
532 qll => 'Por favor introduce tu locator con set/location o set/qra',
533 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
534 qth => 'Tu QTH es ahora \"$_[0]\"',
535 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
536 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
537 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
538 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
539 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
540 rec => '$_[0] records',
541 read1 => 'Lo siento, no hay mensajes nuevos para ti',
542 read2 => 'Msg $_[0] no encontrado',
543 read3 => 'Msg $_[0] no disponible',
544 route => '$_[0] en $_[1] via $_[2]',
545 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
546 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
547 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
548 sat4 => 'Satélites disponibles:-',
549 satnf => 'Satélite $_[0] desconocido',
551 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
552 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
553 sethop3 => 'No hay hops definidos para $_[0]',
554 shutting => '$main::mycall shutting down...',
555 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
556 snode1 => 'Nodo Call Sort Version',
557 snode2 => '$_[0] $_[1] $_[2]',
558 snode3 => '$_[0] Indicativo desconocido',
559 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
560 sorry => 'Lo siento',
561 spf1 => 'spoof: creando nuevo usuario $_[0]',
562 sun => 'QTH Salida Puesta Azim Elev',
563 suser1 => 'usa: indicativo user_field_name value',
564 suser2 => 'Usuario $_[0] no encontrado',
565 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
566 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
567 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
568 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
569 time3 => '$_[0] $_[1]',
570 talks => 'Talk activado $_[0]',
571 talku => 'Talk desactivado $_[0]',
572 talkend => 'Finalizado modo talk contigo',
573 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
574 talkprompt => 'Talk ($_[0])>',
575 talkstart => 'Iniciando modo talk contigo',
576 usernf => '*** User record for $_[0] no encontrado ***',
577 wwvs => 'WWV activado $_[0]',
578 wwvu => 'WWV desactivado $_[0]',
579 wxs => 'WX activado $_[0]',
580 wxu => 'WX desactivado $_[0]',