3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 badnode1 => '$_[0] is now a bad node',
18 badnode2 => '$_[0] is now a good node',
19 badnode3 => 'List of Bad Nodes:-',
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
21 bbs => 'Your BBS Address is now \"$_[0]\"',
22 beepoff => 'Beeps are now off',
23 beepon => 'Beeps are now on',
24 call1 => 'Callsign lookup via $_[0]:',
25 conother => 'Sorry $_[0] you are connected to me on another port',
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
28 confail => 'connection to $_[0] failed ($_[1])',
29 constart => 'connection to $_[0] started',
30 deluser => 'User $_[0] has been deleted',
31 db1 => 'This database is hosted at $_[0]',
32 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
33 db3 => 'Sorry, database $_[0] doesn\'t exist here',
34 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
35 db5 => 'Accessing remote database on $_[0]...standby...',
36 db6 => 'Database $_[0] already exists, delete it first',
37 db7 => 'Database $_[0] created for remote node $_[1]',
38 db8 => 'Database $_[0] created locally',
39 db9 => 'Database $_[0] removed',
40 db10 => '$_[0] records imported into $_[1]',
41 db11 => 'Sending your request(s) to $_[0], please stand by...',
42 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
43 disc1 => 'Disconnected by $_[0]',
44 disc2 => 'Channel $_[0] disconnected',
45 disc3 => 'No Channel, but connection $_[0] disconnected',
46 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
48 dup => 'Sorry, this is a duplicate',
49 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
50 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
51 dxs => 'DX Spots flag set on $_[0]',
52 dxu => 'DX Spots flag unset on $_[0]',
53 e1 => 'Invalid command',
55 e3 => '$_[0]: $_[1] not found',
56 e4 => 'Need at least a prefix or callsign',
58 e6 => '*** No station specified ***',
59 e7 => 'callsign $_[0] not visible on the cluster',
60 e8 => 'Need a callsign and some text',
61 e9 => 'Need at least some text',
62 e10 => '$_[0] not connected locally',
63 e11 => 'Can\'t use $main:mycall as target',
64 e12 => 'Need a node callsign',
65 e13 => '$_[0] is not a node',
66 e14 => 'First argument must be numeric and > 0',
67 e15 => 'invalid qualifier \"$_[0]\"',
68 e16 => 'File \"$_[0]\" exists',
69 e17 => 'Please don\'t use the words: @_ on here',
70 e18 => 'Cannot connect to $_[0] ($!)',
71 e19 => 'Invalid character in line',
72 e20 => 'token $_[0] not recognised',
73 e21 => '$_[0] not numeric',
74 e22 => '$_[0] not a callsign',
75 e23 => '$_[0] not a range (eg 0/30000)',
76 e24 => 'Sorry, Internet access is not enabled',
77 e25 => 'Sorry the value must be between $_[0] and $_[1]',
78 e26 => 'Too many concurrent errors, you are being disconnected',
80 echoon => 'Echoing enabled',
81 echooff => 'Echoing disabled',
82 echow => '*Echoing is currently disabled, set/echo to enable',
83 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
84 emaila => 'Your E-Mail Address is now \"$_[0]\"',
85 email => 'E-mail address set to: $_[0]',
86 export1 => 'usage: export <msgno> <filename>',
87 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
88 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
89 filter1 => 'Filter $_[0] updated for $_[1]',
90 filter2 => 'Unknown filter keyword $_[0]',
91 filter3 => 'No filters defined for $_[0]',
92 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
93 filter5 => 'need some filter commands...',
94 filter6 => '$_[0]$_[1] Filter for $[2] not found',
95 grids => 'DX Grid flag set on $_[0]',
96 gridu => 'DX Grid flag unset on $_[0]',
97 hasha => '$_[0] already exists in $_[1]',
98 hashb => '$_[0] added to $_[1]',
99 hashc => '$_[0] removed from $_[1]',
100 hashd => '$_[0] not in $_[1]',
101 hashe => '$_[0] set on $_[1]',
102 helpe1 => 'Help system unavailable, tell sysop',
103 helpe2 => 'No help available on $_[0]',
104 heres => 'Here set on $_[0]',
105 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
106 hereu => 'Here unset on $_[0]',
107 homebbs => 'Home BBS set to: $_[0]',
108 homenode => 'Home Node set to: $_[0]',
109 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
110 hnodee2 => 'Failed to set homenode on $_[0]',
111 hnode => 'Your Homenode is now \"$_[0]\"',
112 init1 => 'sent initialisation message to $_[0]',
113 iso => '$_[0] Isolated',
114 isou => '$_[0] UnIsolated',
115 isoc => '$_[0] created and Isolated',
116 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
117 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
118 isow => '$_[0] is isolated; unset/isolate $_[0] first',
119 l1 => 'Sorry $_[0], you are already logged on on another channel',
120 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
121 lang => 'Language is now $_[0]',
122 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
123 lange2 => 'failed to set language on $_[0]',
124 lh1 => '$main::data/hop_table.pl doesn\'t exist',
125 loce1 => 'Please enter your location,, set/location <latitude longitude>',
126 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
127 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
128 loc => 'Your Lat/Long is now \"$_[0]\"',
129 lockout => '$_[0] Locked out',
130 lockoutc => '$_[0] Created and Locked out',
131 lockoutun => '$_[0] Unlocked',
132 loginu => 'User $_[0] has logged in',
133 logoutu => 'User $_[0] has logged out',
134 loginn => 'Node $_[0] has logged in',
135 logoutn => 'Node $_[0] has logged out',
136 m1 => 'Enter Subject (30 characters):',
137 m2 => 'Copy of msg $_[0] sent to $_[1]',
138 m3 => 'Sorry, $_[0] is an unacceptable TO address',
139 m4 => 'Sorry, can\'t access message $_[0]',
140 m5 => 'Sorry, I need a message number',
141 m6 => 'Reply to: $_[0]',
142 m7 => 'Subject : $_[0]',
143 m8 => 'Enter Message /EX to send or /ABORT to exit',
144 m9 => 'New mail has arrived for you',
145 m10 => 'Message Aborted',
146 m11 => 'Message no $_[0] saved and directed to $_[1]',
147 m12 => 'Message no $_[0] deleted',
148 m13 => 'Message no $_[0] missing',
149 m14 => 'Message no $_[0] marked as sent to $_[1]',
150 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
151 m16 => 'Need a Message number',
152 m17 => 'Sorry, cannot send messages in $_[0] mode',
153 msg1 => 'Bulletin Messages Queued',
154 msg2 => 'Private Messages Queued',
155 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
156 msgu => 'usage: msg <cmd> <msgno> data...',
157 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
158 moon => 'Location Rise Set Azim Elev RGain dB',
159 mond => 'Monitoring Disabled',
160 mone => 'Monitoring Enabled',
161 namee1 => 'Please enter your name, set/name <your name>',
162 namee2 => 'Can\'t find user $_[0]!',
163 name => 'Your name is now \"$_[0]\"',
164 nodea => '$_[0] set as AK1A style Node',
165 nodeac => '$_[0] created as AK1A style Node',
166 nodeb => '$_[0] set as BBS',
167 nodebc => '$_[0] created as BBS',
168 nodec => '$_[0] set as CLX style Node',
169 nodecc => '$_[0] created as CLX style Node',
170 noder => '$_[0] set as AR-Cluster style Node',
171 noderc => '$_[0] created as AR-Cluster style Node',
172 nodes => '$_[0] set as DXSpider style Node',
173 nodesc => '$_[0] created as DXSpider style Node',
174 nodex => '$_[0] set as DXNET style Node',
175 nodexc => '$_[0] created as DXNET style Node',
176 nodeu => '$_[0] set back as a User',
177 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
178 notdone => 'NOT Done',
179 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
180 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
181 ok => 'Operation successful',
182 outconn => 'Outstanding connect to $_[0]',
183 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
184 pagelth => 'Page Length is now $_[0]',
185 passerr => 'Please use: SET/PASS <password> <callsign>',
186 password => 'Password set or changed for $_[0]',
187 pingo => 'Ping Started to $_[0]',
188 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
189 pinge1 => 'Cannot ping yourself!',
190 pingint => 'Ping interval on $_[0] set to $_[1] secs',
191 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
192 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
193 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
194 priv => 'Privilege level changed on $_[0]',
195 prx => '$main::mycall >',
196 qll => 'Please enter your location with set/location or set/qra',
197 qthe1 => 'Please enter your QTH, set/qth <your qth>',
198 qth => 'Your QTH is now \"$_[0]\"',
199 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
200 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
201 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
202 qra => 'Your QRA Locator is now \"$_[0]\"',
203 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
204 rec => '$_[0] records',
205 read1 => 'Sorry, no new messages for you',
206 read2 => 'Msg $_[0] not found',
207 read3 => 'Msg $_[0] not available',
208 route => '$_[0] on $_[1] via $_[2]',
209 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
210 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
211 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
212 sat4 => 'Satellites available:-',
213 satnf => 'Satellite $_[0] unknown',
215 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
216 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
217 sethop3 => 'No hops set for $_[0]',
218 shutting => '$main::mycall shutting down...',
219 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
220 snode1 => 'Node Call Sort Version',
221 snode2 => '$_[0] $_[1] $_[2]',
222 snode3 => '$_[0] Unknown Call',
223 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
225 spf1 => 'spoof: creating new user $_[0]',
226 stathf => 'HF DX Spot Stats, last 31 days',
227 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
228 statvhf => 'VHF+ DX Spot Stats, last 31 days',
229 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
230 statdx => 'Total DX Spots last 31 days',
231 sun => 'Location Rise Set Azim Elev',
232 suser1 => 'usage: callsign user_field_name value',
233 suser2 => 'User $_[0] not found',
234 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
235 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
236 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
237 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
238 time3 => '$_[0] $_[1]',
239 talks => 'Talk flag set on $_[0]',
240 talku => 'Talk flag unset on $_[0]',
241 talkend => 'Finished talking to you',
242 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
243 talkprompt => 'Talk ($_[0])>',
244 talkstart => 'Starting talking to you',
245 usernf => '*** User record for $_[0] not found ***',
246 wwvs => 'WWV flag set on $_[0]',
247 wwvu => 'WWV flag unset on $_[0]',
248 wxs => 'WX flag set on $_[0]',
249 wxu => 'WX flag unset on $_[0]',
252 addr => 'Addres gezet op: $_[0]',
253 already => '$_[0] reeds geconnect',
254 anns => 'Announce berichten AAN gezet voor $_[0]',
255 annu => 'Announce berichten UIT gezet voor $_[0]',
256 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
257 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
258 beepoff => 'De beep staat nu UIT',
259 beepon => 'De beep staat nu AAN',
260 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
261 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
262 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
263 confail => 'Verbinding met $_[0] mislukt ($_[1])',
264 constart => 'Verbinding met $_[0] gestart',
265 disc1 => 'Gedisconnect door $_[0]',
266 disc2 => '$_[0] gedisconnect',
267 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
268 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
269 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
270 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
271 e1 => 'Ongeldige opdracht',
273 e3 => '$_[0]: $_[1] niet gevonden',
274 e4 => 'Minimaal een prefix of een call nodig',
275 e5 => 'Niet toegestaan',
276 e6 => '*** Geen station gespecifiseerd ***',
277 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
278 e8 => 'Ik heb een call en tekst nodig',
279 e9 => 'Ik heb wel tekst nodig voor een announce!',
280 e10 => '$_[0] is niet lokaal verbonden',
281 e12 => 'Ik heb een node call nodig',
282 e13 => '$_[0] is geen node',
283 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
284 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
285 email => 'E-mail addres gezet op: $_[0]',
286 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
287 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
288 heres => 'Aanwezigheid AAN gezet voor $_[0]',
289 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
290 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
291 homebbs => 'Uw Home mailbox is nu $_[0]',
292 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
293 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
294 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
295 iso => '$_[0] is geisoleerd (Isolated)',
296 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
297 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
298 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
299 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
300 lh1 => '$main::data/hop_table.pl bestaat niet',
301 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
302 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
303 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
304 lockout => '$_[0] heeft geen toegang meer (Locked out)',
305 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
306 m2 => '$_[0] Informatie: $_[1]',
307 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
308 msgnew => 'Er is nieuwe post gearriveerd voor u',
309 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
310 namee2 => 'Gebruiker $_[0] niet te vinden!',
311 name => 'Uw naam is gezet op \"$_[0]\"',
312 node => '$_[0] gezet als een AK1A stijl DX-cluster',
313 nodeu => '$_[0] teruggezet naar gebruiker status',
314 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
315 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
316 ok => 'Opdracht succesvol uitgevoerd',
317 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
318 pagelth => 'Paginalengte gezet op ($_[0]) regels',
319 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
320 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
321 pingo => 'Ping gestart naar $_[0]',
322 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
323 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
324 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
325 priv => 'Privilege level gewijzigd op $_[0]',
326 prx => '$main::mycall >',
327 qll => 'Geef uw locator met set/location of set/qra',
328 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
329 qth => 'Uw QTH is nu \"$_[0]\"',
330 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
331 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
332 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
333 qra => 'Uw QRA Locator is nu \"$_[0]\"',
334 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
335 read1 => 'Sorry, geen berichten voor u',
336 read2 => 'Bericht $_[0] niet gevonden',
337 read3 => 'Bericht $_[0] niet beschikbaar',
338 shutting => '$main::mycall gaat QRT...',
339 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
340 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
341 talks => 'Talk berichten AAN gezet voor $_[0]',
342 talku => 'Talk berichten UIT gezet voor $_[0]',
343 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
344 wwvs => 'WWV berichten AAN gezet voor $_[0]',
345 wwvu => 'WWV berichten UIT gezet voor $_[0]',
346 wxs => 'WX berichten AAN gezet voor $_[0]',
347 wxu => 'WX berichten UIT gezet voor $_[0]',
354 addr => 'Dirección es ahora: $_[0]',
355 already => '$_[0] ya esta conctado',
356 anns => 'Anuncios activados $_[0]',
357 annu => 'Anuncios desactivados $_[0]',
358 badnode1 => '$_[0] es ahora un nodo indeseado',
359 badnode2 => '$_[0] es ahora un nodo normal',
360 badnode3 => 'Lista de nodos indeseados:-',
361 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
362 bbs => 'Tu BBS es ahora \"$_[0]\"',
363 beepoff => 'Beeps desactivados',
364 beepon => 'Beeps activados',
365 call1 => 'Callsign lookup via $_[0]:',
366 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
367 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
368 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
369 confail => 'conexión con $_[0] fallida ($_[1])',
370 constart => 'conexión con $_[0] ha comenzado',
371 disc1 => 'Desconectado por $_[0]',
372 disc2 => '$_[0] desconectado',
373 disc3 => 'No Channel, but connection $_[0] disconnected',
374 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
375 db1 => 'Esta base de datos está en $_[0]',
376 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
377 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
378 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
379 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
380 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
381 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
382 db8 => 'Base de datos $_[0] creada localmente',
383 db9 => 'Base de datos $_[0] borrada',
384 db10 => '$_[0] records imported into $_[1]',
385 db11 => 'Petición enviada a $_[0], por favor espera...',
386 dfreq1 => 'Frecuencia invalida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
387 dup => 'Lo siento, esto es un duplicado',
388 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
389 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
390 dxs => 'DX Spots activado $_[0]',
391 dxu => 'DX Spots desactivado $_[0]',
392 e1 => 'Comando inválido',
393 e2 => 'Error: $_[0]',
394 e3 => '$_[0]: $_[1] no encontrado',
395 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
396 e5 => 'No permitido',
397 e6 => '*** No se ha especificado una estación ***',
398 e7 => 'indicativo $_[0] no visible en el cluster',
399 e8 => 'Se necesita un indicativo y algo de texto',
400 e9 => 'Se necesita al menos algo de texto',
401 e10 => '$_[0] no conectado en local',
402 e11 => 'Can\'t use $main:mycall as target',
403 e12 => 'Se necesita el indicativo del nodo',
404 e13 => '$_[0] no es un nodo',
405 e14 => 'El primer argumento debe de ser mumérico y > 0',
406 e15 => 'cualificador no válido \"$_[0]\"',
407 e16 => 'El fichero \"$_[0]\" ya existe',
408 e17 => 'Por favor no uses la palabra: @_ aqui',
409 e18 => 'No se puede conectar con $_[0] ($!)',
410 e19 => 'Caracter inválido en la linea',
411 e20 => 'señal $_[0] no reconocido',
412 e21 => '$_[0] no numérico',
413 e22 => '$_[0] no es un indicativo',
414 e23 => '$_[0] fuera de rango (ej: 0/30000)',
415 e24 => 'Lo siento, el acceso a internet no está habilitado',
416 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
417 e26 => 'Demasiados errores, seras desconectado',
418 echoon => 'Habilitado eco',
419 echooff => 'Deshabilitado eco',
420 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
421 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
422 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
423 email => 'E-mail es ahora: $_[0]',
424 export1 => 'usa: export <msgno> <filename>',
425 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
426 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
427 filter1 => 'Filtro $_[0] actualizado para $_[1]',
428 filter2 => 'Necesito un valor para $_[0]',
429 filter3 => 'No hay filtros definidos para $_[0]',
430 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
431 filter5 => 'necesito algunos camandos para el filtro...',
432 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
433 grids => 'DX Grid está activado $_[0]',
434 gridu => 'DX Grid está desavtivado $_[0]',
435 hasha => '$_[0] ya existe en $_[1]',
436 hashb => '$_[0] añadido a $_[1]',
437 hashc => '$_[0] eliminado desde $_[1]',
438 hashd => '$_[0] no en $_[1]',
439 hashe => '$_[0] activado $_[1]',
440 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
441 helpe2 => 'No hay ayuda disponible en $_[0]',
442 heres => 'Estas presente $_[0]',
443 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
444 hereu => 'Estas ausente $_[0]',
445 homebbs => 'Tu BBS es ahora: $_[0]',
446 homenode => 'Tu Nodo habitual es ahora: $_[0]',
447 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
448 hnodee2 => 'Fallo al poner homenode en $_[0]',
449 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
450 init1 => 'enviando mensaje de inicialización a $_[0]',
451 iso => '$_[0] Aislado',
452 isou => '$_[0] en red',
453 isoc => '$_[0] creado y aislado',
454 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
455 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
456 lang => 'El idioma es ahora $_[0]',
457 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
458 lange2 => 'fallo al poner idioma en $_[0]',
459 lh1 => '$main::data/hop_table.pl no existe',
460 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
461 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
462 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
463 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
464 lockout => '$_[0] Boloqueado',
465 lockoutc => '$_[0] Creado y bloqueado',
466 lockoutun => '$_[0] Desbloqueado',
467 loginu => 'Usuario $_[0] conectado',
468 logoutu => 'Usuario $_[0] desconectado',
469 loginn => 'Nodo $_[0] conectado',
470 logoutn => 'Nodo $_[0] desconectado',
471 m1 => 'Introduce título (30 caracteres):',
472 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
473 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
474 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
475 m5 => 'Lo siento, se necesita un número de mensaje',
476 m6 => 'Reenviado a: $_[0]',
477 m7 => 'Título : $_[0]',
478 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
479 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
480 m10 => 'mensaje interrumpido',
481 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
482 m12 => 'mensaje nr $_[0] borrado',
483 m13 => 'mensaje nr $_[0] no encontrado',
484 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
485 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
486 m16 => 'Necesito un número de mensaje',
487 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
488 msg1 => 'Bulletin Messages Queued',
489 msg2 => 'Private Messages Queued',
490 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
491 msgu => 'usa: msg <cmd> <msgno> data...',
492 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
493 moon => 'QTH Salida Puesta Azim Elev RGain dB',
494 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
495 namee2 => 'No se encuentra el usuario $_[0]!',
496 name => 'Tu nombre es ahora \"$_[0]\"',
497 nodea => '$_[0] fijado como nodo AK1A ',
498 nodeac => '$_[0] creado como nodo AK1A ',
499 nodeb => '$_[0] fijado como BBS',
500 nodebc => '$_[0] creado como BBS',
501 nodec => '$_[0] fijado como nodo CLX ',
502 nodecc => '$_[0] creado como nodo CLX ',
503 noder => '$_[0] fijado como nodo AR-Cluster ',
504 noderc => '$_[0] creado como nodo AR-Cluster ',
505 nodes => '$_[0] fijado como nodo DXSpider ',
506 nodesc => '$_[0] creado como nodo DXSpider ',
507 nodex => '$_[0] fijado como nodo DXNET ',
508 nodexc => '$_[0] creado como nodo DXNET ',
509 nodeu => '$_[0] es ahora un usuario',
510 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
511 notdone => 'NO se pudo hacer',
512 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
513 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
514 ok => 'Operación realizada',
515 outconn => 'Iniciando conexion con $_[0]',
516 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
517 pagelth => 'La longitud de las páginas es ahora $_[0]',
518 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
519 password => 'Password ajustado o cambiado para $_[0]',
520 pingo => 'Iniciado el ping a $_[0]',
521 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
522 pinge1 => 'No puedes enviarte un ping a ti mismo!',
523 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
524 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
525 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
526 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
527 priv => 'Nivel de privilegios en $_[0]',
528 prx => '$main::mycall >',
529 qll => 'Por favor introduce tu locator con set/location o set/qra',
530 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
531 qth => 'Tu QTH es ahora \"$_[0]\"',
532 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
533 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
534 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
535 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
536 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
537 rec => '$_[0] records',
538 read1 => 'Lo siento, no hay mensajes nuevos para ti',
539 read2 => 'Msg $_[0] no encontrado',
540 read3 => 'Msg $_[0] no disponible',
541 route => '$_[0] en $_[1] via $_[2]',
542 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
543 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
544 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
545 sat4 => 'Satélites disponibles:-',
546 satnf => 'Satélite $_[0] desconocido',
548 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
549 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
550 sethop3 => 'No hay hops definidos para $_[0]',
551 shutting => '$main::mycall shutting down...',
552 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
553 snode1 => 'Nodo Call Sort Version',
554 snode2 => '$_[0] $_[1] $_[2]',
555 snode3 => '$_[0] Indicativo desconocido',
556 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
557 sorry => 'Lo siento',
558 spf1 => 'spoof: creando nuevo usuario $_[0]',
559 sun => 'QTH Salida Puesta Azim Elev',
560 suser1 => 'usa: indicativo user_field_name value',
561 suser2 => 'Usuario $_[0] no encontrado',
562 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
563 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
564 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
565 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
566 time3 => '$_[0] $_[1]',
567 talks => 'Talk activado $_[0]',
568 talku => 'Talk desactivado $_[0]',
569 talkend => 'Finalizado modo talk contigo',
570 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
571 talkprompt => 'Talk ($_[0])>',
572 talkstart => 'Iniciando modo talk contigo',
573 usernf => '*** User record for $_[0] no encontrado ***',
574 wwvs => 'WWV activado $_[0]',
575 wwvu => 'WWV desactivado $_[0]',
576 wxs => 'WX activado $_[0]',
577 wxu => 'WX desactivado $_[0]',