3 # this file contains the system messages. Don't forget to reload them
\r
4 # if you change them (load/messages)
\r
13 addr => 'Address set to: $_[0]',
\r
14 already => '$_[0] already connnected',
\r
15 anns => 'Announce flag set on $_[0]',
\r
16 annu => 'Announce flag unset on $_[0]',
\r
17 badnode1 => '$_[0] is now a bad node',
\r
18 badnode2 => '$_[0] is now a good node',
\r
19 badnode3 => 'List of Bad Nodes:-',
\r
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
\r
21 bbs => 'Your BBS Address is now \"$_[0]\"',
\r
22 beepoff => 'Beeps are now off',
\r
23 beepon => 'Beeps are now on',
\r
24 call1 => 'Callsign lookup via $_[0]:',
\r
25 conother => 'Sorry $_[0] you are connected to me on another port',
\r
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[0])',
\r
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
\r
28 confail => 'connection to $_[0] failed ($_[1])',
\r
29 constart => 'connection to $_[0] started',
\r
30 disc1 => 'Disconnected by $_[0]',
\r
31 disc2 => '$_[0] disconnected',
\r
32 db1 => 'This database is hosted at $_[0]',
\r
33 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
\r
34 db3 => 'Sorry, database $_[0] doesn\'t exist here',
\r
35 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
\r
36 db5 => 'Accessing remote database on $_[0]...standby...',
\r
37 db6 => 'Database $_[0] already exists, delete it first',
\r
38 db7 => 'Database $_[0] created for remote node $_[1]',
\r
39 db8 => 'Database $_[0] created locally',
\r
40 db9 => 'Database $_[0] removed',
\r
41 db10 => '$_[0] records imported into $_[1]',
\r
42 db11 => 'Sending your request(s) to $_[0], please stand by...',
\r
43 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
\r
44 dup => 'Sorry, this is a duplicate',
\r
45 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
\r
46 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
\r
47 dxs => 'DX Spots flag set on $_[0]',
\r
48 dxu => 'DX Spots flag unset on $_[0]',
\r
49 e1 => 'Invalid command',
\r
50 e2 => 'Error: $_[0]',
\r
51 e3 => '$_[0]: $_[1] not found',
\r
52 e4 => 'Need at least a prefix or callsign',
\r
53 e5 => 'Not Allowed',
\r
54 e6 => '*** No station specified ***',
\r
55 e7 => 'callsign $_[0] not visible on the cluster',
\r
56 e8 => 'Need a callsign and some text',
\r
57 e9 => 'Need at least some text',
\r
58 e10 => '$_[0] not connected locally',
\r
59 e11 => 'Can\'t use $main:mycall as target',
\r
60 e12 => 'Need a node callsign',
\r
61 e13 => '$_[0] is not a node',
\r
62 e14 => 'First argument must be numeric and > 0',
\r
63 e15 => 'invalid qualifier \"$_[0]\"',
\r
64 e16 => 'File \"$_[0]\" exists',
\r
65 e17 => 'Please don\'t use the words: @_ on here',
\r
66 e18 => 'Cannot connect to $_[0] ($!)',
\r
67 e19 => 'Invalid character in line',
\r
68 e20 => 'token $_[0] not recognised',
\r
69 e21 => '$_[0] not numeric',
\r
70 e22 => '$_[0] not a callsign',
\r
71 e23 => '$_[0] not a range (eg 0/30000)',
\r
72 e24 => 'Sorry, Internet access is not enabled',
\r
73 e25 => 'Sorry the value must be between $_[0] and $_[1]',
\r
75 echoon => 'Echoing enabled',
\r
76 echooff => 'Echoing disabled',
\r
77 echow => '*Echoing is currently disabled, set/echo to enable',
\r
78 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
\r
79 emaila => 'Your E-Mail Address is now \"$_[0]\"',
\r
80 email => 'E-mail address set to: $_[0]',
\r
81 export1 => 'usage: export <msgno> <filename>',
\r
82 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
\r
83 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
\r
84 filter1 => 'Filter $_[0] updated for $_[1]',
\r
85 filter2 => 'Need a value for $_[0]',
\r
86 filter3 => 'No filters defined for $_[0]',
\r
87 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
\r
88 filter5 => 'need some filter commands...',
\r
89 filter6 => '$_[0]$_[1] Filter for $[2] not found',
\r
90 grids => 'DX Grid flag set on $_[0]',
\r
91 gridu => 'DX Grid flag unset on $_[0]',
\r
92 hasha => '$_[0] already exists in $_[1]',
\r
93 hashb => '$_[0] added to $_[1]',
\r
94 hashc => '$_[0] removed from $_[1]',
\r
95 hashd => '$_[0] not in $_[1]',
\r
96 hashe => '$_[0] set on $_[1]',
\r
97 helpe1 => 'Help system unavailable, tell sysop',
\r
98 helpe2 => 'No help available on $_[0]',
\r
99 heres => 'Here set on $_[0]',
\r
100 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
\r
101 hereu => 'Here unset on $_[0]',
\r
102 homebbs => 'Home BBS set to: $_[0]',
\r
103 homenode => 'Home Node set to: $_[0]',
\r
104 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
\r
105 hnodee2 => 'Failed to set homenode on $_[0]',
\r
106 hnode => 'Your Homenode is now \"$_[0]\"',
\r
107 init1 => 'sent initialisation message to $_[0]',
\r
108 iso => '$_[0] Isolated',
\r
109 isou => '$_[0] UnIsolated',
\r
110 isoc => '$_[0] created and Isolated',
\r
111 l1 => 'Sorry $_[0], you are already logged on on another channel',
\r
112 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
\r
113 lang => 'Language is now $_[0]',
\r
114 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
\r
115 lange2 => 'failed to set language on $_[0]',
\r
116 lh1 => '$main::data/hop_table.pl doesn\'t exist',
\r
117 loce1 => 'Please enter your location,, set/location <latitude longitude>',
\r
118 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
\r
119 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
\r
120 loc => 'Your Lat/Long is now \"$_[0]\"',
\r
121 lockout => '$_[0] Locked out',
\r
122 lockoutc => '$_[0] Created and Locked out',
\r
123 lockoutun => '$_[0] Unlocked',
\r
124 loginu => 'User $_[0] has logged in',
\r
125 logoutu => 'User $_[0] has logged out',
\r
126 loginn => 'Node $_[0] has logged in',
\r
127 logoutn => 'Node $_[0] has logged out',
\r
128 m1 => 'Enter Subject (30 characters):',
\r
129 m2 => 'Copy of msg $_[0] sent to $_[1]',
\r
130 m3 => 'Sorry, $_[0] is an unacceptable TO address',
\r
131 m4 => 'Sorry, can\'t access message $_[0]',
\r
132 m5 => 'Sorry, I need a message number',
\r
133 m6 => 'Reply to: $_[0]',
\r
134 m7 => 'Subject : $_[0]',
\r
135 m8 => 'Enter Message /EX to send or /ABORT to exit',
\r
136 m9 => 'New mail has arrived for you',
\r
137 m10 => 'Message Aborted',
\r
138 m11 => 'Message no $_[0] saved and directed to $_[1]',
\r
139 m12 => 'Message no $_[0] deleted',
\r
140 m13 => 'Message no $_[0] missing',
\r
141 m14 => 'Message no $_[0] marked as sent to $_[1]',
\r
142 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
\r
143 m16 => 'Need a Message number',
\r
144 m17 => 'Sorry, cannot send messages in $_[0] mode',
\r
145 msg1 => 'Bulletin Messages Queued',
\r
146 msg2 => 'Private Messages Queued',
\r
147 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
\r
148 msgu => 'usage: msg <cmd> <msgno> data...',
\r
149 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
\r
150 moon => 'Location Rise Set Azim Elev RGain dB',
\r
151 namee1 => 'Please enter your name, set/name <your name>',
\r
152 namee2 => 'Can\'t find user $_[0]!',
\r
153 name => 'Your name is now \"$_[0]\"',
\r
154 nodea => '$_[0] set as AK1A style Node',
\r
155 nodeac => '$_[0] created as AK1A style Node',
\r
156 nodec => '$_[0] set as CLX style Node',
\r
157 nodecc => '$_[0] created as CLX style Node',
\r
158 noder => '$_[0] set as AR-Cluster style Node',
\r
159 noderc => '$_[0] created as AR-Cluster style Node',
\r
160 nodes => '$_[0] set as DXSpider style Node',
\r
161 nodesc => '$_[0] created as DXSpider style Node',
\r
162 nodex => '$_[0] set as DXNET style Node',
\r
163 nodexc => '$_[0] created as DXNET style Node',
\r
164 nodeu => '$_[0] set back as a User',
\r
165 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
\r
166 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
\r
167 ok => 'Operation successful',
\r
168 outconn => 'Outstanding connect to $_[0]',
\r
169 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
\r
170 pagelth => 'Page Length is now $_[0]',
\r
171 passerr => 'Please use: SET/PASS <password> <callsign>',
\r
172 password => 'Password set or changed for $_[0]',
\r
173 pingo => 'Ping Started to $_[0]',
\r
174 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
\r
175 pinge1 => 'Cannot ping yourself!',
\r
176 pingint => 'Ping interval on $_[0] set to $_[1] secs',
\r
177 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
\r
178 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
\r
179 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
\r
180 priv => 'Privilege level changed on $_[0]',
\r
181 prx => '$main::mycall >',
\r
182 qll => 'Please enter your location with set/location or set/qra',
\r
183 qthe1 => 'Please enter your QTH, set/qth <your qth>',
\r
184 qth => 'Your QTH is now \"$_[0]\"',
\r
185 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
\r
186 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
\r
187 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
\r
188 qra => 'Your QRA Locator is now \"$_[0]\"',
\r
189 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
\r
190 rec => '$_[0] records',
\r
191 read1 => 'Sorry, no new messages for you',
\r
192 read2 => 'Msg $_[0] not found',
\r
193 read3 => 'Msg $_[0] not available',
\r
194 route => '$_[0] on $_[1] via $_[2]',
\r
195 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
\r
196 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
\r
197 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
\r
198 sat4 => 'Satellites available:-',
\r
199 satnf => 'Satellite $_[0] unknown',
\r
200 satdisc => '-----',
\r
201 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
\r
202 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
\r
203 sethop3 => 'No hops set for $_[0]',
\r
204 shutting => '$main::mycall shutting down...',
\r
205 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
\r
206 snode1 => 'Node Call Sort Version',
\r
207 snode2 => '$_[0] $_[1] $_[2]',
\r
208 snode3 => '$_[0] Unknown Call',
\r
209 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
\r
211 spf1 => 'spoof: creating new user $_[0]',
\r
212 sun => 'Location Rise Set Azim Elev',
\r
213 suser1 => 'usage: callsign user_field_name value',
\r
214 suser2 => 'User $_[0] not found',
\r
215 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
\r
216 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
\r
217 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
\r
218 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
\r
219 time3 => '$_[0] $_[1]',
\r
220 talks => 'Talk flag set on $_[0]',
\r
221 talku => 'Talk flag unset on $_[0]',
\r
222 talkend => 'Finished talking to you',
\r
223 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
\r
224 talkprompt => 'Talk ($_[0])>',
\r
225 talkstart => 'Starting talking to you',
\r
226 usernf => '*** User record for $_[0] not found ***',
\r
227 wwvs => 'WWV flag set on $_[0]',
\r
228 wwvu => 'WWV flag unset on $_[0]',
\r
229 wxs => 'WX flag set on $_[0]',
\r
230 wxu => 'WX flag unset on $_[0]',
\r
233 addr => 'Addres gezet op: $_[0]',
\r
234 already => '$_[0] reeds geconnect',
\r
235 anns => 'Announce berichten AAN gezet voor $_[0]',
\r
236 annu => 'Announce berichten UIT gezet voor $_[0]',
\r
237 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
\r
238 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
\r
239 beepoff => 'De beep staat nu UIT',
\r
240 beepon => 'De beep staat nu AAN',
\r
241 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
\r
242 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
\r
243 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
\r
244 confail => 'Verbinding met $_[0] mislukt ($_[1])',
\r
245 constart => 'Verbinding met $_[0] gestart',
\r
246 disc1 => 'Gedisconnect door $_[0]',
\r
247 disc2 => '$_[0] gedisconnect',
\r
248 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
\r
249 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
\r
250 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
\r
251 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
\r
252 e1 => 'Ongeldige opdracht',
\r
253 e2 => 'Fout: $_[0]',
\r
254 e3 => '$_[0]: $_[1] niet gevonden',
\r
255 e4 => 'Minimaal een prefix of een call nodig',
\r
256 e5 => 'Niet toegestaan',
\r
257 e6 => '*** Geen station gespecifiseerd ***',
\r
258 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
\r
259 e8 => 'Ik heb een call en tekst nodig',
\r
260 e9 => 'Ik heb wel tekst nodig voor een announce!',
\r
261 e10 => '$_[0] is niet lokaal verbonden',
\r
262 e12 => 'Ik heb een node call nodig',
\r
263 e13 => '$_[0] is geen node',
\r
264 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
\r
265 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
\r
266 email => 'E-mail addres gezet op: $_[0]',
\r
267 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
\r
268 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
\r
269 heres => 'Aanwezigheid AAN gezet voor $_[0]',
\r
270 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
\r
271 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
\r
272 homebbs => 'Uw Home mailbox is nu $_[0]',
\r
273 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
\r
274 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
\r
275 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
\r
276 iso => '$_[0] is geisoleerd (Isolated)',
\r
277 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
\r
278 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
\r
279 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
\r
280 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
\r
281 lh1 => '$main::data/hop_table.pl bestaat niet',
\r
282 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
\r
283 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
\r
284 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
\r
285 lockout => '$_[0] heeft geen toegang meer (Locked out)',
\r
286 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
\r
287 m2 => '$_[0] Informatie: $_[1]',
\r
288 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
\r
289 msgnew => 'Er is nieuwe post gearriveerd voor u',
\r
290 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
\r
291 namee2 => 'Gebruiker $_[0] niet te vinden!',
\r
292 name => 'Uw naam is gezet op \"$_[0]\"',
\r
293 node => '$_[0] gezet als een AK1A stijl DX-cluster',
\r
294 nodeu => '$_[0] teruggezet naar gebruiker status',
\r
295 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
\r
296 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
\r
297 ok => 'Opdracht succesvol uitgevoerd',
\r
298 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
\r
299 pagelth => 'Paginalengte gezet op ($_[0]) regels',
\r
300 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
\r
301 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
\r
302 pingo => 'Ping gestart naar $_[0]',
\r
303 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
\r
304 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
\r
305 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
\r
306 priv => 'Privilege level gewijzigd op $_[0]',
\r
307 prx => '$main::mycall >',
\r
308 qll => 'Geef uw locator met set/location of set/qra',
\r
309 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
\r
310 qth => 'Uw QTH is nu \"$_[0]\"',
\r
311 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
\r
312 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
\r
313 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
\r
314 qra => 'Uw QRA Locator is nu \"$_[0]\"',
\r
315 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
\r
316 read1 => 'Sorry, geen berichten voor u',
\r
317 read2 => 'Bericht $_[0] niet gevonden',
\r
318 read3 => 'Bericht $_[0] niet beschikbaar',
\r
319 shutting => '$main::mycall gaat QRT...',
\r
320 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
\r
321 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
\r
322 talks => 'Talk berichten AAN gezet voor $_[0]',
\r
323 talku => 'Talk berichten UIT gezet voor $_[0]',
\r
324 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
\r
325 wwvs => 'WWV berichten AAN gezet voor $_[0]',
\r
326 wwvu => 'WWV berichten UIT gezet voor $_[0]',
\r
327 wxs => 'WX berichten AAN gezet voor $_[0]',
\r
328 wxu => 'WX berichten UIT gezet voor $_[0]',
\r
335 addr => 'Dirección es ahora: $_[0]',
\r
336 already => '$_[0] ya esta conctado',
\r
337 anns => 'Anuncios activados $_[0]',
\r
338 annu => 'Anuncios desactivados $_[0]',
\r
339 badnode1 => '$_[0] es ahora un nodo malo',
\r
340 badnode2 => '$_[0] es ahora un nodo bueno',
\r
341 badnode3 => 'Lista de nodos malos:-',
\r
342 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
\r
343 bbs => 'Tu BBS es ahora \"$_[0]\"',
\r
344 beepoff => 'Beeps desactivados',
\r
345 beepon => 'Beeps activados',
\r
346 call1 => 'Callsign lookup via $_[0]:',
\r
347 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
\r
348 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
\r
349 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
\r
350 confail => 'conexión con $_[0] fallida ($_[1])',
\r
351 constart => 'conexión con $_[0] ha comenzado',
\r
353 disc1 => 'Desconectado por $_[0]',
\r
354 disc2 => '$_[0] desconectado',
\r
355 db1 => 'Esta base de datos está en $_[0]',
\r
356 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
\r
357 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
\r
358 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
\r
359 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
\r
360 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
\r
361 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
\r
362 db8 => 'Base de datos $_[0] creada localmente',
\r
363 db9 => 'Base de datos $_[0] borrada',
\r
364 db10 => '$_[0] records imported into $_[1]',
\r
365 db11 => 'Petición enviada a $_[0], por favor espera...',
\r
366 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
\r
367 dup => 'Lo siento, esto es un duplicado',
\r
368 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
\r
369 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
\r
370 dxs => 'DX Spots activado $_[0]',
\r
371 dxu => 'DX Spots desactivado $_[0]',
\r
372 e1 => 'Comando inválido',
\r
373 e2 => 'Error: $_[0]',
\r
374 e3 => '$_[0]: $_[1] no encontrado',
\r
375 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
\r
376 e5 => 'No permitido',
\r
377 e6 => '*** No se ha especificado una estación ***',
\r
378 e7 => 'indicativo $_[0] no visible en el cluster',
\r
379 e8 => 'Se necesita un indicativo y algo de texto',
\r
380 e9 => 'Se necesita al menos algo de texto',
\r
381 e10 => '$_[0] no conectado en local',
\r
382 e11 => 'Can\'t use $main:mycall as target',
\r
383 e12 => 'Se necesita el indicativo del nodo',
\r
384 e13 => '$_[0] no es un nodo',
\r
385 e14 => 'El primer argumento debe de ser mumérico y > 0',
\r
386 e15 => 'cualificador no válido \"$_[0]\"',
\r
387 e16 => 'El fichero \"$_[0]\" ya existe',
\r
388 e17 => 'Por favor no uses la palabra: @_ aqui',
\r
389 e18 => 'No se puede conectar con $_[0] ($!)',
\r
390 e19 => 'Caracter inválido en la linea',
\r
391 e20 => 'señal $_[0] no reconocido',
\r
392 e21 => '$_[0] no numérico',
\r
393 e22 => '$_[0] no es un indicativo',
\r
394 e23 => '$_[0] fuera de rango (ej: 0/30000)',
\r
395 e24 => 'Lo siento, el acceso a internet no está habilitado',
\r
396 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
\r
398 echoon => 'Habilitado eco',
\r
399 echooff => 'Deshabilitado eco',
\r
400 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
\r
401 emaile1 => 'Por favor introduce tu E-mail, set/email <tu e-mail>',
\r
402 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
\r
403 email => 'E-mail es ahora: $_[0]',
\r
404 export1 => 'usa: export <msgno> <filename>',
\r
405 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
\r
406 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
\r
407 filter1 => 'Filtro $_[0] actualizado para $_[1]',
\r
408 filter2 => 'Necesito un valor para $_[0]',
\r
409 filter3 => 'No hay filtros definidos para $_[0]',
\r
410 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
\r
411 filter5 => 'necesito algunos camandos para el filtro...',
\r
412 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
\r
413 grids => 'DX Grid está activado $_[0]',
\r
414 gridu => 'DX Grid está desavtivado $_[0]',
\r
416 hasha => '$_[0] ya existe en $_[1]',
\r
417 hashb => '$_[0] añadido a $_[1]',
\r
418 hashc => '$_[0] eliminado desde $_[1]',
\r
419 hashd => '$_[0] no en $_[1]',
\r
420 hashe => '$_[0] activado $_[1]',
\r
421 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
\r
422 helpe2 => 'No hay ayuda disponible en $_[0]',
\r
423 heres => 'Here activado $_[0]',
\r
424 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
\r
425 hereu => 'Here desactivado $_[0]',
\r
426 homebbs => 'Tu BBS es ahora: $_[0]',
\r
427 homenode => 'Tu Nodo habitual es ahora: $_[0]',
\r
428 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
\r
429 hnodee2 => 'Fallo al poner homenode on $_[0]',
\r
430 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
\r
431 init1 => 'enviando mensaje de inicialización a $_[0]',
\r
432 iso => '$_[0] Aislado',
\r
433 isou => '$_[0] Desaislado',
\r
434 isoc => '$_[0] creado y aislado',
\r
435 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
\r
436 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
\r
437 lang => 'Language ahora es $_[0]',
\r
438 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
\r
439 lange2 => 'fallo al poner lenguage en $_[0]',
\r
440 lh1 => '$main::data/hop_table.pl no existe',
\r
441 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
\r
442 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
\r
443 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
\r
444 lockout => '$_[0] Boloqueado',
\r
445 lockoutc => '$_[0] Creado y bloqueado',
\r
446 lockoutun => '$_[0] Desbloqueado',
\r
447 loginu => 'Usuario $_[0] conectado',
\r
448 logoutu => 'Usuario $_[0] desconectado',
\r
449 loginn => 'Nodo $_[0] conectado',
\r
450 logoutn => 'Nodo $_[0] desconectado',
\r
451 m1 => 'Introduce título (30 caracteres):',
\r
452 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
\r
453 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
\r
454 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
\r
455 m5 => 'Lo siento, se necesita un número de mensaje',
\r
456 m6 => 'Reenviado a: $_[0]',
\r
457 m7 => 'Título : $_[0]',
\r
458 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
\r
459 m9 => 'Hay correo nuevo para ti',
\r
460 m10 => 'mensaje interrumpido',
\r
461 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
\r
462 m12 => 'mensaje nr $_[0] borrado',
\r
463 m13 => 'mensaje nr $_[0] no encontrado',
\r
464 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
\r
465 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
\r
466 m16 => 'Necesito un número de mensaje',
\r
467 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
\r
468 msg1 => 'Bulletin Messages Queued',
\r
469 msg2 => 'Private Messages Queued',
\r
470 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
\r
471 msgu => 'usa: msg <cmd> <msgno> data...',
\r
472 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
\r
473 moon => 'Localidad Salida Puesta Azim Elev RGain dB',
\r
474 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
\r
475 namee2 => 'No se encuentra el usuario $_[0]!',
\r
476 name => 'Tu nombre es ahora \"$_[0]\"',
\r
477 nodea => '$_[0] set as AK1A style Node',
\r
478 nodeac => '$_[0] created as AK1A style Node',
\r
479 nodec => '$_[0] set as CLX style Node',
\r
480 nodecc => '$_[0] created as CLX style Node',
\r
481 noder => '$_[0] set as AR-Cluster style Node',
\r
482 noderc => '$_[0] created as AR-Cluster style Node',
\r
483 nodes => '$_[0] set as DXSpider style Node',
\r
484 nodesc => '$_[0] created as DXSpider style Node',
\r
485 nodex => '$_[0] set as DXNET style Node',
\r
486 nodexc => '$_[0] created as DXNET style Node',
\r
487 nodeu => '$_[0] es ahora un usuario',
\r
488 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
\r
489 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
\r
490 ok => 'Operación realizada',
\r
491 outconn => 'Conexión externa con $_[0]',
\r
492 page => 'Teclea Enter para continuar, A para parar ($_[0] lineas) >',
\r
493 pagelth => 'La longitud de las páginas es ahora $_[0]',
\r
494 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
\r
495 password => 'Password ajustado o cambiado para $_[0]',
\r
496 pingo => 'Iniciado el ping a $_[0]',
\r
497 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
\r
498 pinge1 => 'No puedes enviarte un ping a ti mismo!',
\r
499 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
\r
500 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
\r
501 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
\r
502 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
\r
503 priv => 'Nivel de privilegios en $_[0]',
\r
504 prx => '$main::mycall >',
\r
505 qll => 'Por favor introduce tu locator con set/location o set/qra',
\r
506 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
\r
507 qth => 'Tu QTH es ahora \"$_[0]\"',
\r
508 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
\r
509 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
\r
510 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
\r
511 rec => '$_[0] records',
\r
512 read1 => 'Lo siento, no hay mensajes nuevos para ti',
\r
513 read2 => 'Msg $_[0] no encontrado',
\r
514 read3 => 'Msg $_[0] no disponible',
\r
515 route => '$_[0] en $_[1] via $_[2]',
\r
516 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] mins',
\r
517 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
\r
518 sat3 => 'Syntax: SH/SAT <nombre> [<horas> <intervalo>]',
\r
519 sat4 => 'Satélites disponibles:-',
\r
520 satnf => 'Satélite $_[0] desconocido',
\r
521 satdisc => '-----',
\r
522 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
\r
523 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
\r
524 sethop3 => 'No hops set for $_[0]',
\r
525 shutting => '$main::mycall shutting down...',
\r
526 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
\r
527 snode1 => 'Nodo Call Sort Version',
\r
528 snode2 => '$_[0] $_[1] $_[2]',
\r
529 snode3 => '$_[0] Indicativo desconocido',
\r
530 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
\r
531 sorry => 'Lo siento',
\r
532 spf1 => 'spoof: creando nuevo usuario $_[0]',
\r
533 sun => 'Posición Salida Puesta Azim Elev',
\r
534 suser1 => 'usa: indicativo user_field_name value',
\r
535 suser2 => 'Usuario $_[0] no encontrado',
\r
536 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
\r
537 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
\r
538 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
\r
539 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
\r
540 time3 => '$_[0] $_[1]',
\r
541 talks => 'Talk activado $_[0]',
\r
542 talku => 'Talk desactivado $_[0]',
\r
543 talkend => 'Finalizado modo talk contigo',
\r
544 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
\r
545 talkprompt => 'Talk ($_[0])>',
\r
546 talkstart => 'Iniciando modo talk contigo',
\r
547 usernf => '*** User record for $_[0] no encontrado ***',
\r
548 wwvs => 'WWV activado $_[0]',
\r
549 wwvu => 'WWV desactivado $_[0]',
\r
550 wxs => 'WX activado $_[0]',
\r
551 wxu => 'WX desactivado $_[0]',
\r
projects / spider.git / blob