+26Jun08=======================================================================
+1. added show/ik3qar command by Leo IZ5FSA. See comments in perl/Internet.pm
+for setup instructions (note that you will have to copy these lines to
+local/Internet.pm before it will work).
+24Jun08=======================================================================
+1. Change the route finding algorithm completely. No more recursion. No more
+tree searching. It now gives you answers even on a partial cluster map. Oh
+and the answers are correct, instead on completely random.
+2. Put back (maybe some of) US State handling.
+3. Add CTY-1806 prefix data
+28May08=======================================================================
+1. remove "recursion limit" message from Route.pm
+28May08=======================================================================
+1. Improve the detection of short exact callsigns that are out of prefix area
+(eg K7A) (thank you FCC).
+2. Improve long line handling on console.pl
+3. Add CTY-1805 cty.dat
+26May08=======================================================================
+1. Put a hard limit on the depth of searching for routes
+2. Add CTY-1804 prefix changes
+13May08=======================================================================
+1. add disc users|nodes|all so that each of these classes can be disconnected
+in one command. From a request by Luigi IK5ZUK.
+12May08=======================================================================
+1. add 'exact' keyword on sh/dx to allow for an exact match to a callsign.
+From a request by Robert HB9DZA.
+10May08=======================================================================
+1. add some privileges to (un)set/bad* and show/bad* commands. Thanks to
+Mauro IV3SCP for pointing this out to me.
+06May08=======================================================================
+1. Finally made the incompatible change of changing DXUser->get* to
+DXUser::get*. This will break any third party addons or commands use these
+commands.
+2. Change version to 1.55
+3. Drop the lower limit of 60m to 5100 after Dave G7RAU pointed out usage.
+(see http://www.bandplans.com/index.php?band=60)
+22Apr08=======================================================================
+1. Added two Xmas Is calls.
+15Apr08=======================================================================
+1. added CTY-1803 changes
+25Mar08=======================================================================
+1. Include some cty.day changes
+19Mar08=======================================================================
+1. Include CTY-1802 cty.dat changes from Jim AD1C
+29Feb08=======================================================================
+1. Fix crash on rcmd of an invalid command.
+25Feb08=======================================================================
+1. Arrange for AGWMsg to retry connection either if the AGW engine isn't
+loaded on startup or it disappears for some reason and restarts.
+19Feb08=======================================================================
+1. Added CTY-1801 cty.dat data.
+2. Fix problem with entering non-ascii data and then executing commands that
+are guessed from the "cleaned up" version of the string. Now if you enter
+commands with invalid characters, it will error immediately.
+3. fix a problem detecting IPV4 localhost on IPV6 enabled systems.
+10Feb08=======================================================================
+1. sort sh/node output. Also show more information.
+05Feb08=======================================================================
+1. Added a Windows only BPQ interface from the man himself: John G8BPQ.
+See some instructions in /spider/txt/spiderBPQ_en.txt for how to use it.
+07Jan08=======================================================================
+1. more changes to cty.dat
+07Jan08=======================================================================
+1. added TO5FJ to cty.dat (under orders from Jim AD1C :-)
+05Jan08=======================================================================
+1. Made necessary change to get DXSpider to (seem to) work in perl 5.10
+27Dec07=======================================================================
+1, added CTY-1711 prefix changes (and new wpxloc.raw) from Jim AD1C.
+25Nov07=======================================================================
+1. Fix a crash on receiving an rcmd from an new node.
+21Nov07=======================================================================
+1. Added CTY-1710 prefix changes
+19Nov07=======================================================================
+1. change MRTG graphs to be based on GMT, not localtime. This allows one to
+more easily compare debug data with traffic graphs.
+2. Add a create/user command to just add a plain user.
+17Nov07=======================================================================
+1. Add Local::ann() as requested by Felipe PY1NB.
+16Nov07=======================================================================
+1. add CTY-1709 prefix changes
+2. added extra checking for the time stamp on PC9x sentences. These must now
+be within 15 minutes (configurable) of this node's time to be accepted.
+3. made show/newc terminal width aware.
+24Oct07=======================================================================
+1. Added CTY-1708 prefix changes
+23Oct07=======================================================================
+1. Added CTY-1707 prefix changes
+15Oct07=======================================================================
+1. prevent PC61 from propagating outside spider boxes.
+2. simplify the regex for sh/contest to allow it to work on perl < 5.8.x.
+09Oct07=======================================================================
+1. Added *VERY* important change to prevent loops on PC9x sentences.
+06Oct07=======================================================================
+1. added the possibility of having a motd_ax25 especially for sending to
+radio connections after a suggestion by Paolo YV1DIG.
+05Oct07=======================================================================
+1. Handle PC61 from VE1CC clusters as PC11.
+01Oct07=======================================================================
+1. fix .gtkconsole_data creation bug.
+27Sep07=======================================================================
+1. Fixed gtkconsole to split out all the windows. See
+/spider/gtkconsole/README for installation and usage instructions. This
+program will work on both Windows and Linux provided the extra Gtk2 perl
+libraries + dependencies are installed. Instructions for getting them are in
+the README file.
+25Sep07=======================================================================
+1. Fix mrtg command so that it does not require /var/lock (which anyway gets
+removed and recreated on boot - and the debianised mrtg does not recognise
+that) nor /var/lib/mrtg for the confcache (whatever that is).
+24Sep07=======================================================================
+1. fix error message on disconnect and, BTW, fix the cause of premature
+disconnections in the new PC92 code.
+22Sep07=======================================================================
+1. fix mrtg script so that it sets LANG='C', in addition, it appears that you
+will need to create a /var/lock/mrtg and /var/lib/mrtg directory, both with
+chmod 01777 /var/lock/mrtg /var/lib/mrtg. They may already exist but without
+the correct permissions.
+15Sep07=======================================================================
+1. Add *optional* INET6 connectivity. In order to use this you must load
+IO::Socket::INET6 and its dependencies from CPAN or get the distro's packaged
+versions. I used 'sudo aptitude install libio-socket-inet6-perl' for ubuntu
+(which should work for debian as well), for fedora/rpm based systems
+'sudo yum install perl-IO-Socket-INET6' or near equiv should work. This has
+been done quite simplistically, but it seems to work.
+10Sep07=======================================================================
+1. Remove warnings for EINPROGRESS etc for Windows perl 5.8.
+2. Try to see if using just one lastid is viable in all situations. If it is
+then this will cure the talk problem.
+20Aug07=======================================================================
+1. add cty.dat + wpxloc.raw changes for CTY-1706.
+31Jul07=======================================================================
+1. extend 60m band slighty and add ssb section.
+2. add a new cty.dat (CTY-1705) from Jim AD1C.
+27Jul07=======================================================================
+1. Added Angel's changes to Messages for Spanish (finally).
+25Jul07=======================================================================
+1. don't clear out routing tables on shutdown. This should speed that up.
+24Jul07=======================================================================
+1. Try to target PC93 (the combined talk/ann/chat sentence) better. Prevent
+PC12 chat going to non-dxspider and non-ak1a nodes. None of the others seem to
+handle it correctly (Lee VE7CC: do you?).
+2. a few other tidyups,
+see: http://www.dxcluster.org/cgi-bin/gitweb.cgi?p=spider.git
+for details.
+18Jul07=======================================================================
+1. Change the meaning of set/isolate. Set/isolate now works in both directions
+in that an isolated node will only have its local config remembered and will
+only be sent this nodes local config. This is exactly equivalent to both
+ends setting set/isolate. If that is already the case then there should be
+no noticeable change. Any extra that the far node sends, over and above its
+local config will now be ignored.
+17Jul07=======================================================================
+1. remove dupefile on startup and on ending the node. Add clear/dupefile
+command to allow people to do it at runtime as well.
+12Jul07=======================================================================
+1. Change disconnection code so that nodes that are no longer routable are
+(all) cleared out.
+2. Add help for sh/band and also allow query of individual band or regions.
+11Jul07=======================================================================
+1. improve speed of sh/c/n
+2. remove all $Id$ strings from cmd tree
+09Jul07=======================================================================
+1. remove check for PC93 from legacy nodes. This will allow PC10s to be
+propagated correctly. Probably.
+08Jul07=======================================================================
+1. put in a temporary fix to the crashing on incoming PC10 talks, whilst I
+try to work out how it is happening.
+06Jul07=======================================================================
+1. re-arrange id checking so that it is more logical and check that config
+records, that can be an hour coming, are not thoughtlessly ignored, thus
+causing nodes to time out.
+2. Make sure that the 'over midnight' distance calculation actually does what
+is required!
+3. Tart up version number reporting in sh/node.
+4. Pass the correct number of parameters in pc93 -> pc12 conversions which
+should stop returning PC12s coming out as SYSOP announces.
+05Jul07=======================================================================
+1. Try to make sure that the node config broadcasts are actually sent...
+03Jul07=======================================================================
+1. fix unwanted dupe notifications if a PC12 comes back in on a loop.
+02Jul07=======================================================================
+1. Add a new command to show the contents of the cmd_cache. This allows those
+people whom develop their own commands to see which version they are using.
+It is called show/cmd_cache (or sh/cmd for short).
+2. Add some extra info to the links command. Show whether a link is isolated
+and also whether it has filters (if applicable) and whether these are
+personalised ('Y') or the default node_filter ('D').
+29Jun07=======================================================================
+1. If a node is set/isolated then make sure that a) pc9x is not advertised
+and b) pc9x is ignored.
+2. Add (un)set/wantpc9x command (but please don't use them without talking
+to me first), here be dragons!!
+25Jun07=======================================================================
+1. make sure that a C record is sent for node call every update period.
+2. make announces work again (probably).
+3. Fix long standing possibility of a crash with a new user.
+4. Add continuous chatting (like talk with no message eg 'chat #9000' just on
+its own with no message).
+24Jun07=======================================================================
+1. Fix the routing algorithms to allow route selection in the face of
+incomplete trees of nodes (trees as produced by sh/newc).
+2. Fix the obscount issues which mean that many nodes get timed out after 3hrs.
+3. Extend 4m to 70631 to cover CT.
+23Jun07=======================================================================
+1. fix basic deduping algorithm
+2. rearrange node startup protocol to avoid issuing unnecessary PC92 and also
+to spread the PC92Cs out for dependent nodes.
+3. increase the PC92C update time to 1 hour.
+4. fix sh/route, with a view toward replacing Route::alldxchan.
+5. downgrade a link advertising pc9x if no PC92C forthcoming from it back to
+old style protocol and carry on, rather than disconnecting (protocol facist
+that I was).
+6. Fix isolated pc9x nodes so that they remain in oldstyle protocol.
+22Jun07=======================================================================
+1. Fix Alias for sh/mydx (so it isn't the same as sh/myfdx).
+2. Fix sh/c/n uninitialised variable message
+3. Fix (and improve) sh/newc gb7 problem
+4. Fix broken set/sys_qra command
+21Jun07=======================================================================
+1. merge back SIMPLEROUTE branch to issue as official 1.54.
+18Jun07=======================================================================
+1. add a optional dependency on Encode (included in 5.8.x) to encode strings
+to latin1 for deduping purposes, hopefully getting rid of some dupes.
+2. add a default INPUT filter for a node (by_dxcc <node's country>) if no
+specific or default INPUT node exists.
+14Jun07=======================================================================
+1. prepare for git repository and moving of anon cvs repository to
+scm.tobit.co.uk.
+13Jun07=======================================================================
+1. start using git.
+2. change all the version / build numbering.
+11Jun07=======================================================================
+1. Change the frequency normalisation for DX Spot dupe checks so that any
+decimal part is thrown away (in other words: truncate the freq to integer khz)
+20May07=======================================================================
+1. add 1704 cty.dat
+08Apr07=======================================================================
+1. add CTY-1703 cty.dat
+2. alter the way the dupefile deletion is done.
+18Mar07=======================================================================
+1. change URL in show/425.
+04Mar07=======================================================================
+1. add CTY 1702 prefix data files
+22Feb07=======================================================================
+1. add show/myfdx to Aliases.
+15Feb07=======================================================================
+1. allow convkeps.pl to parse NORAD keps files.
+22Jan07=======================================================================
+1. disable default propagation of PC9x sentences
+2. simplify PC17 handling
+16Jan07=======================================================================
+1. back ported a change to PC16 handling so that a locally connected node's
+info clears out and generally overrides any residual PC16 info gathered from
+elsewhere.
+15Jan07=======================================================================
+1. added CTY-1701
+07Jan07=======================================================================
+1. use IO::Socket blocking where available and switch off or ignore all
+attempts to block.
+05Jan07=======================================================================
+1. increase default ephemeral deduping on PC15 to 6 minutes (from 2).
+23Nov06=======================================================================
+1. added wrapping to over length lines in console.pl.
+03Nov06=======================================================================
+1. add CTY-1609 changes
+2. add back Geo::Taf code with submitted mods
+3. add new version of the sh/425 code using the new database location.
+09Oct06=======================================================================
+1. fix problems with bad filters pointed by Thomas DL3SBB.
+27Jul06=======================================================================
+1. merge in official issue version of wpxloc.raw (with one change: 4U1V).
+26Jul06=======================================================================
+1. incorporated Jim AD1C's spiffy new, unified, wpxloc.raw and version
+1605 of cty.dat.
+21Jul06=======================================================================
+1. Added the (now) all new gtkconsole program, with all the changes needed in
+dxspider to run it (yet another cmd interface (sigh)). You will need gtk2-perl
+installed (most modern linux distros do this automatically). The big news is
+that this will work on Windows boxes as well if you install the Gtk libraries
+as per: http://gtk2-perl.sf.net.
+03Jun06=======================================================================
+1. Added changes to wpxloc.raw (prefixes) suggested by Jim AD1C.
+2. Made a change to prevent xml data being interpreted unless we are
+configured for it.
+3. Change the buddy messages after a suggestion from Angel EA7WA.
+02Apr06=======================================================================
+1. incorporated cty-1604 data.
+29Mar06=======================================================================
+1. fix sh/muf that I broke in the previous change
+26Mar06=======================================================================
+1. Arrange for any online buddies to be displayed when a user logs on.
+2. Try to reduce the amount of POSIX stuff that is loaded to just that which
+is required.
+23Mar06=======================================================================
+1. Added cty-1603 data.
+2. On the advice of Jim AD1C I have changed around some things in wpxloc.raw
+that affect 8J,CT2,KC4,KG4,KG6,ZK1 and ZS2. These should now show the more
+likely canonical prefix.
+3. On the advice of Tom WB8ZRL, I have made BW an alias for BV (Taiwan) and
+made some other changes to affect the selection between the mainland and the
+island more reliable.
+10Mar06=======================================================================
+1. fix sh/c/n.
+2. Add new Spanish translations by Angel EA7WA.
+07Mar06=======================================================================
+1. Add the node call to remote tell_login and tell_buddie calls.
+06Mar06=======================================================================
+1. Fix warning on empty PC19s.
+2. Add new command set/local_node to allow people to see logins/outs on other
+related nodes.
+3. Add new command set/buddy to allow people to see when their favorite
+chum(s) logins/out.
+4. Arrange filter reading so that the following order is followed for users:
+callsign, callsign less ssid, user_default. Nodes are unchanged.
+14Feb06=======================================================================
+1. Turn R and SFI around in mrtg.pl.
+13Feb06=======================================================================
+1. Updated prefixes with cty-1601 data.
+2. Fixed qth in show/muf so that it shows the correct qth (if known).
+3. Try to make the state machine in convkeps.pl deal with more variations
+of the 2 line keps sets that are available on line. Also give a sensible
+error message if no keps were actually decoded.
+4. Update the base keps to the latest set of AMSAT keps 06033.
+04Feb06=======================================================================
+1. Explicitly ignore spots with lower case characters in the spotted call
+01Feb06=======================================================================
+1. Explicitly ignore spots with blank spotted callsigns
+26Jan06=======================================================================
+1. Fix divide by 0 error in DXBearing (how come this has taken so long to
+appear?).
+22Jan06=======================================================================
+1. Remove +<prefix> from the fronts of comments to fix LoTW dupes.
+18Jan06=======================================================================
+1. Fix spurious announce from previous year appearing in sh/ann.
+15Jan06=======================================================================
+1. Fix some obviously long standing problems with create_sysop.pl and also
+with initialising the User file.
+2. Fixed the problem with certain things not being shown in sh/log (because of
+a regex that rejected too many things).
+3. Speeded up sh/log quite a bit at the same time.
+4. Add a default limit of the last 36 months for sh/log querys.
+14Jan06=======================================================================
+1. undo frequency rounding change, it causes more problems than it solves.
+11Jan06=======================================================================
+1. Fixed problem with badspotters doing ann/full as pointed out by Luigi
+IK5ZUK.
+07Jan06=======================================================================
+1. Fixed problem with the standalone 'showdx' program pointed out by Leo,
+IZ5FSA.
+2. Fixed rounding problem on entering spots as pointed out by Ron N5IN.
+3. Fixed problem with badspotters sending DX as pointed out by Luigi IK5ZUK.
+4. Added some extra logging for swearing so that we can see what lines used
+which swear words. Hopefully this will allow sysops to refine their swearing
+filters more easily.
+06Jan06=======================================================================
+1. Fix problem with rcmd <call> sh/fdx
+27Dec05=======================================================================
+1. put some more flesh on the SQL stuff (which may turn out to be a bit of a
+red herring as it doesn't appear to be significantly faster (for spots) than
+the existing code).
+21Dec05=======================================================================
+1. Add start of optional SQL working.
+2. Fix BadWords so that the simple word check splits words on word boundaries.
+13Dec05=======================================================================
+1. upissue version no to 1.52
+07Nov05=======================================================================
+1. Fix warnings on filtering spots where the filter was looking at US states
+and there is no US state in the spot.
+2. Fix the dupes caused by having a prefix in the last characters of the
+comment.
+01Nov05=======================================================================
+1. add log2csv.pl for printing out logfiles
+25Oct05=======================================================================
+1. Incorporated the cty.dat from Jim dated today (25Oct05).
+08Oct05=======================================================================
+1. Reject PC11s with blank spot callsigns
+01Sep05=======================================================================
+1. Change the logic of propagating WWV broadcasts. Now all non-input filtered
+PC23s will be sent on. Previously only the first successful new WWV was
+rebroadcast.
+2. fix the problem with by_dxcc and origin_dxcc not working on WWV.
+29Aug05=======================================================================
+1. try something else to resolve/prevent more of these spot dupes. It appears
+that there is software out there chopping off variable amounts from the ends
+of comment fields. This makes the task of detecting dupes that much harder.
+10Aug05=======================================================================
+1. trim dx spot duplicate length after normalisation
+2. Do the same for announces
+08Jul05=======================================================================
+1. new CTY.DAT encorporated
+27May05=======================================================================
+1. change copyright in dbg message at startup.
+25May05=======================================================================
+1. Added a means to import a script of arbitrary commands to allow external
+programs to do stuff.
+23Mar05=======================================================================
+1. fix (un)set/badspotter so that it only stores non-ssid calls.
+2. mention action on talk and ann/full in help.
+22Mar05=======================================================================
+1. Fix ? so it works again.
+2. Fix Aliases for sh/c so they are correct
+3. Fix sh/connect for AGW ports and other niffnaffs.
+22Mar05=======================================================================
+1. fixed sh/c/node sh/c/a and sh/newc/n.
+21Mar05=======================================================================
+1. log AGW port on connection
+2. merge in latest (2Mar2005) cty.dat
+3. fix command searching so it does not pick up false positives for commands
+with / in them in directories that don't have that.
+4. Important security change.
+5. add missing input filter for WWV
+16Mar05=======================================================================
+1. make the correct correction to the DL entry in wpxloc.raw (left out the
+'N' of 'North' in the latitude).
+2. Severely reduce the dupes caused by some of the badly configured / written
+spot suckers out there.
+13Mar05=======================================================================
+1. There has been a mix up in the Aranea1 branch. I have managed to merge a
+change that I have been meaning to do for ages. I have now made that change
+here.
+27Feb05=======================================================================
+1. fix duping on bad spot suckers that copy the prefix that is put at the end
+of the comment section by AR-C nodes becoming the whole comment.
+26Feb05=======================================================================
+1. Added show/grayline command from Steve K9AN. This is also aliased to
+show/greyline :-)
+2. fix spot dupe ambiguity on spotter having an SSID (remove it).
+25Feb05=======================================================================
+1. Changed the way spot deduping is done. This is likely to make deduping much
+stricter. In essence a person cannot spot the same call on the same frequency
+more than once an hour (configurable) unless he makes a (non-duped) comment
+as well.
+2. Added Swains Island
+3. Added TO4G for Glorioso
+19Feb05=======================================================================
+1. changed ssb allocation on 40m to add missing 5Khz.
+2. Change sh/425 to Leo, IZ5FSA's requirements.
+08Feb05=======================================================================
+1. possibly fixed the multiple condition problems on sh/dx
+2. added some FAQs.
+05Feb05=======================================================================
+1. Fix a long standing (ie since the first bulletin was sent) bug with old
+mail not being deleted until a restart was done.
+2. As well as a duplicate check on existing bulletins, I have added a check
+the message is not (already) too old.
+3. fix problem for perl < 5.6 in Thingy.pm
+03Feb05=======================================================================
+1. Added latest Spanish translations courtesy of Angel EA7WA.
+2. Force all languages to use pr in en in Messages, as the prompt is
+the same for all.
+19Jan05=======================================================================
+1. More Spanish changes by Angel, EA7WA.
+2. add language dependant motd files. You can now have motd_{lang} and
+motd_nor_{lang} (eg for Spanish: motd_es and motd_nor_es) for normal and
+non-registered (if you use registration) users respectively. Based on an idea
+from Angel, EA7WA.
+18Jan05=======================================================================
+1. Added missing Spanish translation courtesy of Angel EA7WA.
+2. Really incorporate latest cty.dat (11Dec04) as opposed to merely thinking
+I had (and still add 3X0Y as well).
+3. fix ? all in non english language
+4. Alias sh/st and sh/sta back to show/station from show/startup.
+17Jan05=======================================================================
+1. Added 3Y0X to Peter Island 3Y in cty.dat.
+16Jan05=======================================================================
+1. Added the changes to Canadian Prefixes so that usdbraw.gz from Charlie
+K1XX's website (http://dxc.k1xx.com/download) dated after 1Jan05 will include
+Canadian city and province data as well the existing US data.
+2. Improve the apropos command to take better account of language and do
+a better job of only showing english stuff for commands where there really is
+no local language version.
+15Jan05=======================================================================
+1. knocked over a few possible ways of people annoying other people thru
+the use of scripts
+2. Fixed problem in DXCommandmode with an indirect call that did not work
+in perl < 5.8.0.
+3. Add Spanish translations of new scripting commands in help, from Angel
+EA7WA.
+13Jan05=======================================================================
+1. Fixed prompting in languages other than English.
+2. Fixed language problem with spoof, but that simply hides a whole can of
+worms that I shall have to address later.
+3. Added make clean to src Makefile (!!!)
+12Jan05=======================================================================
+1. Add $main::bumpexisting variable which allows a new connection for a user
+call to disconnect an existing connection with the same call. The default for
+this variable is 'true' (1). This means that existing behaviour has changed.
+set/var $main::bumpexisting = 0 to return to original behaviour.
+2. Remind a user every hour (as default) that they have new messages.
+set/var $DXCommandmode::msgpolltime = 3*3600 to set it to 3 hours.
+3. Allow some substitutions in set/prompt (call, date, time and
+cluster call) and add dxspider just before the > as standard.
+4. Add $main::allowdxby variable so that sysops can switch off the
+'DX BY <othercall' command. It is set to 0 (ie disabled) by default. This
+is for sysops who don't want to bump privilege to allow it. That still works
+as before.
+5. Fix the bug in 'dx by <call>' that causes only the first word of the
+comment to be recorded.
+6. Fix bug counting backwards over a leap year in Julian.pm which meant that
+sh/dxstats doesn't start at 'yesterday' anymore.
+7. Added set/startup and show/startup commands to allow users and sysops
+to create and display startup scripts. There is also an unset/startup to
+remove a script.
+27Dec04=======================================================================
+1. add improved VE data from Charlie K1XX. You should update usdb as well.
+22Dec04=======================================================================
+1. Changed all the names of US prefixes to be prepended with their State code.
+thus "Alaska-KL7" becomes "AK-Alaska-KL7".
+21Dec04=======================================================================
+1. added AGW port no after an example by IW5DEZ.
+2. modified links command to suggestions by Charlie K1XX.
+3. added show/groups command to show recently used chat groups by Tommy
+SM3OSM.
+4. fixed T8 / V6 ambiguity (at least basically).
+20Dec04=======================================================================
+1. updated create_prefix.pl to only use (supplied) wpxloc.raw and cty.dat
+2. Added IG9, GM/S, 4U1V and some other detail changes to make it compatible
+with cty.dat.
+3. regenerated prefix_data.pl with updated wpxloc.raw and cty.dat 11Dec04.
+17Dec04=======================================================================
+1. add undocumented special command for VE7CC.
+10Dec04=======================================================================
+1. Included fixes sent in by David, N9KT for the new DB0SDX site.
+2. removed redundant "rm *bys" and "rm *cys" from Spot::init().
+09Dec04=======================================================================
+1. fix show/mydx properly this time (and test the fix!)
+2. fix the default in show/qrz
+06Dec04=======================================================================
+1. fix show/mydx if there is no defined spotfilter
+07Oct04=======================================================================
+1. added the ability for people to import chat from external programs.
+create a directory called /spider/chat_import, make sure it is writable
+by any applications that might dump stuff in there (chmod 1777
+/spider/chat_import on *nux). Put a file with a sensible name in there;
+the first part of the name will be the chat group to whom the message will
+be sent. So solar.txt.12325 = SOLAR. Announces can also be sent to local, all
+and sysop (ie files whose name begins with those names). Each line in the
+file becomes a chat line or an announce. See importwwv.pl for an example.
+DO NOT USE importwwv.pl, I am already using it and if you do as well, people
+will get duplicates which will ANNOY THEM!!! It is just an example.
+23Aug04=======================================================================
+1. add the start of an alternative routing engine (RouteDB)
+20Aug04=======================================================================
+1. Added new protocol specification to techdoc
+17Aug04=======================================================================
+1. change 'fo' alias in Aliases
+31Jul04=======================================================================
+1. add a load of .cvsignore lines to reduce the updating noise
+30Jul04=======================================================================
+1. make sure that // is not converted to / in command lines.
+28Jul04=======================================================================
+1. backported 'Investigate' from NP branch so that only pingable nodes
+are 'believed'.
+2. added missing entries in Internet.pm for sh/contest
+26Jul04=======================================================================
+1. added extra variables to Internet.pm to allow the various internet query
+commands to alter the url that they use.
+2. Added show/425 command from Leo, IZ5FSA.
+05Jul04=======================================================================
+1. fix rspfcheck on pc27
+23Jun04=======================================================================
+1. Add zone, by_zone, itu, by_itu, state and by_state searches to sh/dx
+2. Update manuals for CVS and new commands
+22Jun04=======================================================================
+1. Add the show/mydx command which *may* filter your spots using your
+spot filter.
+17Jun04=======================================================================
+1. alter processing of PC17 to see if they get distributed more than now.
+14Jun04=======================================================================
+1. fix previous fix of sh/dx
+09Jan04=======================================================================
+1. removed PC90 which was breaking various filtering things.
+2. added realtime spot formats to sh/dx (at least in basic form), this is
+activated by using either of the keywords 'real' of 'rt' on the command
+line. Also added sh/fdx as an alias.
+01Jan04=======================================================================
+1. move position of USDB init to get rid of an obscure bug pointed out by
+Charlie K1XX.
+2. Remove redundant documentation.
+31Dec03=======================================================================
+1. alter remote database handling to 'new standard'.
+30Dec03=======================================================================
+1. updated website to make it clear(er) that it all works under Windows (like
+wot Charlie said...).
+2. made the changes to the German Messages that Thomas DL3SBB sent me a
+loooong time ago.
+3. made 'dx by' require at least privilege 1.
+29Dec03=======================================================================
+1. updated dxoldtonew.pl so that it takes an AK1A DX.DAT file (argument on
+command line or a default of /spider/data/DX.DAT and outputs the standard
+DXSpider format spot files. Please be warned that if any of these files
+already exist, the data will be appended onto the end of the file. Please
+make sure you have backups or at least be aware that this may give strange
+results which may be 'out of order'.
+24May03=======================================================================
+1. Added more french translations from Robert (HB9BZA) and we now have some
+french help as well (also from Robert). A splendid effort. Thank you.
+16May03=======================================================================
+1. Correct Windows section of the Addendum file! (g0vgs)
+06May03=======================================================================
+1. Add Portuguese language courtesy of David CT1DRB (set/lang pt)
+2. Add French language courtesy of Robert HB9BZA (set/lang fr)
+02Apr03=======================================================================
+1. Fix some minor problems with the manuals (g0vgs)
+01Apr03=======================================================================
+1. Update filtering primer, changes by N3RD (g0vgs)
+28Mar03=======================================================================
+1. Added an excellent document on filtering to the manuals from Jim, W3BG
+2. started to remove old documents (g0vgs)
+27Mar03=======================================================================
+1. play around with sh/reg, sh/iso, sh/node and sh/lock to make them work
+slightly better with the new user format.
+2. update manuals (g0vgs)
+26Mar03=======================================================================
+1. add some ak1a compatibility changes to chat
+2. added help text for chat, join, leave and sh/chat.
+18Mar03=======================================================================
+1. minor corrections to manuals (g0vgs)
+17Mar03=======================================================================
+1. changed the regex determining what is a callsign to be more comprehensive.
+I would suggest re-running create_qsl.pl and then restarting.
+2. Fix chat so that output appears to users again and PC sentence conforms
+to standard. Add kludge to remove rewritten chats if I see them.
+3. Only send chat PCs to spider or AK1A boxes
+12Mar03=======================================================================
+1. added HC and QRZ.com to possible QSL locations, if you want to pick up
+historical info (ie start again), run create_qsl.pl after update and restart
+the node (which you will need to do anyway).
+2. changed the dbcreate command so that you can say:
+ dbcreate dxqsl cmd show/dxqsl
+which will allow local and remote users to execute commands as though they
+are Databases. You can also include these databases in chains. What you do
+with this, is ofcourse a moot question.
+3. Update manuals (g0vgs)
+11Mar03=======================================================================
+1. Changed the name of show/qsl to show/dxqsl.
+2. Alter Commands_en.hlp to match new name and issue manual updates (g0vgs)
+10Mar03=======================================================================
+1. added show/qsl command. This command basically takes the normal output of
+sh/dx qsl and stores it in a database. In order to enable this command you
+will require the Storable module to be loaded (you will already have done
+this with a bit of luck for the new DXUser interface). The suggested
+procedure is (after the update) to run /spider/perl/create_qsl.pl (this may
+take a long time), then immediately it finishes, restart the node. The node
+will then keep the database up to date automatically. If you are not
+interested in historical data then you can leave this step out.
+2. added show/contest command from Tommy SM3OSM via Rene OZ1LQH.
+08Mar03=======================================================================
+1. Added chat, join, leave commands to allow general purpose conferencing
+on arbitrary subjects. [Translators: added e34,e35,join,leave]. There is
+currently no help. There is also sh/chat.
+28Feb03=======================================================================
+1. Charlie K1XX fixed the sh/iso, sh/reg and sh/node commands
+25Feb03=======================================================================
+1. backported switch processing for PC sentences
+24Feb03=======================================================================
+1. add the 'run' command and the 'privilege' command to allow sysops to
+create scripts for people.
+2. fix show/user so that it doesn't moan about uninitialised variables
+23Feb03=======================================================================
+1. Added show/wm7d command (a US only callbook server) [by K1XX].
+2. Added a prototype show/db0sdx command (w.i.p).
+3. Added set/dxcq and set/dxitu zone commands [Translators: I have added
+dxcqu, dxcqs, dxitus and dxituu to Messages].
+4. Add new Commands to manuals (g0vgs)
+5. make sure that none of the above set/dx... commands are defaulted on
+22Feb03=======================================================================
+1. changed qrz.com address
+2. added Charlie's [K1XX] new wpxloc.raw data stuff to get WA1, KC3 type
+callsigns to work better.
+3. added in set/usstate command which prints any US state information
+available on both the spotted (LHS of time) and spotter (RHS of time).
+[Translators: I have added usstates and usstateu to Messages].
+4. Merged in the new (faster) DXUser.pm.
+
+[NOTE] this version will require Storable to be installed. On the
+other hand the code may work without, in a compatible way. This bit hasn't
+been very well tested (the 'no Storable' condition that is).
+
+[*** NOTE ***] make sure that you do an 'export_user' BEFORE restarting
+you node. (Yes I know this is like a shrinkwrap licence, but I can't
+help it).
+
+It will take several minutes for the node to restart when it does the
+conversion from .v2 to .v3 user file. Please go and have a good strong cup
+of tea whilst this is happening.
+
+If it fails then you will need to edit your latest user_asc file on (or about)
+line 25 it says: $ref = decode($f[1]); you will need to change that to
+$ref = asc_decode($f[1]); and then do: perl user_asc
+
+DO MAKE SURE THAT you include subdirectories in your CVS update
+
+21Feb03=======================================================================
+1. moved the export of the users file to Wednesday night (GMT) to avoid
+possible crashes and/or delays during a contest weekend.
+14Feb03=======================================================================
+1. some major changes to the structure of the manual documentation. To bring
+the manuals into line, they now have the language tag (like
+installation_en.html). Hopefully someone will translate the manuals
+eventually :-) I have left the old files in CVS for now to allow
+everyone to change any symlinks etc to the new filenames. I will remove the
+old files shortly, please update your links! (g0vgs)
+2. docs makefile updated and commands2sgml.pl added from M0AZM. This script
+inserts the helpfiles automagically from Commands_en.hlp into the relevant
+manuals. (g0vgs)
+3. Commands_en.hlp adjusted slightly to ensure at least one space before
+examples for the purposes of the above script. (g0vgs)
+4. Amend index.html to the right document names. (g0vgs)
+09Feb03=======================================================================
+1. Correct some typos in the manuals and update perl modules etc. Also
+amend some help files to show correct syntax, around the 'clear' commands
+swapping [input] and <callsign> in each case, translators please take note.
+Thanks to Dave N3RD for info. (g0vgs)
+2. update the addendum for latest build and include information on additional
+modules required. (g0vgs)
+20Jan03=======================================================================
+1. changed sh/c so that, by default, it only shows the caller's country nodes
+sh/c all will show the old style full list. "sh/c sk gb" will show the config
+of all the GB and SK nodes.
+2. changed sh/stat and sh/route for nodes
+19Jan03=======================================================================
+1. I have made a fundemental change to the way PC19s are dealt with as a
+result of the discussions on the mailing list. From now on, only nodes that
+issue PC16s will have PC19s propagated. If they *ever* issue a PC16 then from
+then on they are considered as being 'connected' and thus routable. No PC16
+and you have no route. This should stop all passive links being routed. For
+the few cases where you know that that is a very small node and it rarely has
+users, then you can do a set/routepc19 <node> to enable PC19 propagation. In
+the even more rare case of you wanting to prevent PC19s being routed thru
+your node, you can use unset/routepc19. THIS IS NOT A SUBSTITUTE FOR ROUTE
+FILTERING!!!!! [translators: I have added wpc16s, wpc16u, wpc19s, wpc19u]
+
+BTW the first time you connect again you will notice a separate PC19 go out
+for each 'new' PC16 that the node sees. This is normal and will go away the
+second time the system needs to issue a PC19.
+2. Alter the export_user command to remove users that have no useful info
+and have not been seen for more than (default) 1 year.
+3. fix the problem of users on more than one node not being propagated
+4. remove spaces and all non-US ascii characters from PC41 for the dup check.
+5. put in check to see if the parent of a newly allowed PC19 is still there
+(this needs further investigation).
+17Jan03=======================================================================
+1. Fix problem with lines being left in the main input queue for a
+disconnected/ing node.
+14Jan03=======================================================================
+1. Tidy up AUTOLOAD functions
+2. Make sure that empty PC16s are not sent on startup to a node.
+12Jan03=======================================================================
+1. add Czech language courtesy of Milan OK1XH
+06Jan03=======================================================================
+1. add the latest changes to the spider-web java interface from Rene, OZ1LQH.
+Please note that there is a change to the spider.cgi file this time so that
+the client show 'Connected to Node_Call' instead of the hostname. You will
+need to update your cgi file when you update the changes. Please make sure
+that you back up your old files first! (g0vgs)
+2. yet more changes to the java client from Rene :-) Also added a makefile
+and a Changes file for the client in the spider-web directory.
+05Jan03=======================================================================
+1. fix some irritating messages caused by protocol loops in sh/c
+2. update copyright
+3. move GN from GJ to GI
+31Dec02=======================================================================
+1. Update files in the java client with fixes and additions from Rene, OZ1LQH
+05Dec02=======================================================================
+1. Fix SSID issues with AGWMsg.
+2. updated show/hftable, vhftable, hfstats, vhfstats and dxstats after K1XX
+sent in some sample code indicated new functionality he requires. Translators
+please note that the stat* messages have been changed and e33 added. I have
+also added quite a bit of extra examples and things to the relevant HELP
+texts. It is now possible to search from any date for up to 365 days of data.
+You can get the information by prefix or by callsign or for ALL spots.
+04Dec02=======================================================================
+1. updated sh/log to allow searching for more arbitrary strings such as IP
+addresses
+08Nov02=======================================================================
+1. update Keps.pm to reflect which satellites now come round in the weekly
+updates. I suggest that you copy this file to /spider/local and do a load/kep
+and you should lose all the 'old' satellites (eg MIR).
+08Nov02=======================================================================
+1. made some small mods to grepdbg and spot2csv.pl
+2. fix a possible DOS in dx command
+07Nov02=======================================================================
+1. allow three digit longitudes
+2. make a small change to see if messages now stay in place.
+3. make keep actually stick over a reboot and take it fully into account for
+deletions (translators: I added m18).
+4. try not to delete new messages (even if this is an update that reads 'old'
+messages with missing fields).
+29Oct02=======================================================================
+1. make sh/log et al a bit more efficient.
+2. fix dupe message in dx.
+3. update cty.dat to the latest, add k8T, K8O to KH8 and TX5BTY to FO/A
+4. clear cache on reload of prefixes
+25Oct02=======================================================================
+1. remove the dupefile automatically if it becomes corrupted
+2. instrument the startup slightly more
+21Oct02=======================================================================
+1. Fix msg aging.
+2. make the default pinginterval and obscount variable (set/var
+$DXProt::pingint and $DXProt::obscount)
+20Oct02=======================================================================
+1. remove dupe check on local sysop announces
+2. fix format errors on sh/muf for 5.8.0
+3. add new version of the administration manual that includes WinCVS with
+thanks to K1XX (g0vgs).
+17Oct02=======================================================================
+1. added new Spanish files for help and Messages from Angel, EA7WA.
+16Oct02=======================================================================
+1. decrease the default max length of PC16/19 to around 180 characters to be
+slightly friendlier to ARC, which seems to have a difficulty reconstructing
+lines from multiple packets. Also make the value settable via set/var.
+2. strip off blank spaces from the ends of lines of command output.
+15Oct02=======================================================================
+1. made some detail changes to the raw USDB data and the routines that
+generate and operate on them. There were some bugs involving a few 'missing'
+callsigns which been fixed. Also there were some, for our purposes, invalid
+callsigns in the database which have been removed (down to about 820,000
+entries now). You should really update your database.
+
+The latest code now (conditionally; ie if you have it loaded it will use it)
+support Compress::Zlib on both *nux and Windows. The suggested procedure
+is this:-
+
+1. Download the corrected database from
+ http://www.dxcluster.org/download/usdbraw.gz to somewhere like /tmp.
+2. update from CVS.
+3. Restart (on linux, just stop the node and *don't* restart on Windows).
+4. remove /spider/data/usdb.v1
+5. cd /spider/perl
+6. (perl) create_usdb.pl /tmp/usdbraw.gz (or wherever you put it)
+6a. If you don't have Compress::Zlib loaded then you will need to gunzip
+ it manually and do: create_usdb.pl /tmp/usdbraw (not Windows :-)
+7. on linux, in a console window do: load/usdb, on windows: restart the node.
+--
+2. Added set/usdb command to add adding or changing of a callsign in the USDB
+3. Stop dupe spots from the same spotter (with or without comment corruption)
+14Oct02=======================================================================
+1. added show/usdb command as a simple, direct interface to the information
+available in the USDB stuff.
+13Oct02=======================================================================
+1. A large change has occurred. There is now some (optional) US state recog-
+nition. This is in its early stages but appears to work for me. You will need
+to :-
+
+1. download the database at http://www.dxcluster.org/download/usdbraw.gz
+2. save it somewhere (/tmp, anywhere).
+3. Decompress it using your favorite program (gunzip / winzip) [call it
+ usdbraw if winzip]{BE WARNED, some browsers may decompress it on the
+ fly for you, you can tell; if it is 5Mb it is compressed - 16Mb not}.
+4. remove any /spider/data/user.v1 files lying around (at least for this
+ first time.
+5. cd /spider/perl
+6. perl create_usdb.pl /tmp/usdbraw (ie the UNCOMPRESSED file)
+7. Wait, I suggest some cups of tea are in order.
+8. Wait a bit more.
+
+You don't need Compress::Zlib anymore, I assumed it was universal.
+
+You will be able do this while the node is running somewhen. There is a
+planned method of keeping the US DB up to date with smaller (ie < 15Mb) patch
+files once a week but you will have to wait a bit for the code to bed down
+first. You can filter on routes, spots and announces using 'call_state' or
+'by_state' and a comma separated list of state codes. The HELP has been
+updated (which may help...).
+
+Once you have run the create_usdb.pl you will need to restart.
+
+If you don't need this, then don't run create_usdb.pl it will simply be
+a waste of time. The run-time version is 30Mb and has 840,000 odd entries
+in it. This does not replace or supplant sh/qrz (sorry Charlie [who put me
+up to this]).
+
+2. There are a number of other niff-naff changes which I hope will improve
+rather than hinder your user experience (including check forward as well as
+back for those speedy clocked dupes mentioned below).
+12Oct02=======================================================================
+1. attempt to improve the "check back for 5 minutes to see if this spot is
+the same as a previous one but for the time spotted" dupe check.
+2. improve the sh/vhftable and sh/hftable commands to allow you to enquire
+by dxcc country (using the relevant prefixes or dxcc country numbers).
+[note to translators, I have changed the help text and Messages tags for
+stat*].
+07Oct02=======================================================================
+1. fix problem with (invalid) callsigns starting with '0' (zero) eg 0f6ira.
+03Oct02=======================================================================
+1. only sysop (priv=5+) can now send to distro SYSOP, ordinary users will have
+their message routed to the $main::myalias callsign as a private message.
+29Sep02=======================================================================
+1. Added LRU caching to DXUsers and Prefix.
+2. make Timer::handler only search its chain once a second seeing as that
+is the minimum granularity available.
+3. add some separation between cfg file making, data generation and mrtg
+running. See /spider/cmd/mrtg.pl for some instructions...
+4. Added data in and out to the MRTG stats, you need to do an indexmaker
+to get them onto the index page, I have also added some colour to the
+legend to make what is being displayed a bit more obvious.
+
+See http://gb7djk.dxcluster.org/mrtg/stats.html for an example of the
+default screen.
+
+28Sep02=======================================================================
+1. Put some transparent caching into Prefix.pm to see if this has a
+performance impact.
+2. Fix doing a new log open for every log file write.
+26Sep02=======================================================================
+1. added WWV and WCY to the Mrtg stats. Don't forget to do an indexmaker!
+25Sep02=======================================================================
+1. added mrtg stuff to the system as a template. In order to use this you
+must install mrtg onto your system and copy all the mrtg files (or at least
+all the images) to new directory /spider/html/mrtg. The system generates the
+config file for you as part of its workings. To get it to update add a line
+to your spider crontab like:
+
+00,05,10,15,20,25,30,35,40,45,50,55 * * * * run_cmd('mrtg all')
+
+You will also need to do an indexmaker once in the html directory. I put the
+index page into /spider/html/mrtg/stats.html YMMV. I do:
+
+indexmaker --output stats.html --columns=1 --title "MRTG statistics for
+GB7DJK" ../../mrtg/mrtg.cfg
+
+But all on one line.
+2. I have made a technical change to the way ax25 connects outward on unix
+boxes are done. I currently have no way of testing this. I think it still
+works.
+22Sep02=======================================================================
+1. Add changes to the installation manual for Windows users from K1XX
+21Sep02=======================================================================
+1. make some detail changes for connects out in Msg.pm
+17Sep02=======================================================================
+1. Added shu command for Charlie's (K1XX) benefit (together with the rest of
+our butterfingered sysops) who miss the '/' out of sh/u frequently enough
+to curse. 'shu' simply types out a message saying 'type SHUT' to shutdown the
+node. Added 'shu' to /spider/perl/Messages. No need to restart, just
+load/mess and load/alias after doing a CVS.
+21Aug02=======================================================================
+1. added 'warc' and 'contesthf' to the regions in bands.pl (K1XX).
+20Aug02=======================================================================
+1. fix lines containing just the character '0' in messages (and console.pl)
+(K1XX).
+2. remove all newline characters from AGW data, thus treating it like a
+'normal' ax25 connection where the 'newline' convention is just carriage
+return (K1XX)
+06Aug02=======================================================================
+1. added 5.5Mhz band as '60m'.
+29Jul02=======================================================================
+1. Changed max R value in wcy to 500 from 300.
+2. Got rid of warnings on startup using 5.8.0
+28Jul02=======================================================================
+1. stick the invalid key deletes in an eval loop in export_user
+18Jul02=======================================================================
+1. Make additions and changes to manuals. (g0vgs)
+16Jul02=======================================================================
+1. Add changes to the spider-web java web client. Thanks to Rene, OZ1LQH. It
+should now be easier to install and run for all systems. (g0vgs)
+11Jul02=======================================================================
+1. NP work has now started in ernest ([ed]who he?). You will need to download
+Digest::SHA1 and any dependant packages to run this release. HOWEVER tempted
+you are, please don't set/newprotocol on any nodes. It won't work.
+http://www.cpan.org/modules/by-module/Digest/Digest-SHA1-2.01.tar.gz
+2. Make the cluster node registered on from startup (from Mark HB9DBM).
+3. Make the 'export_users' process *MUCH* more robust. It should now accept
+funny characters and not rely on an absolutely 'perfect' user file to work.
+Errors are displayed (and logged if done from the cluster) and then ignored.
+Invalid callsigns are removed.
+09Jul02=======================================================================
+1. make the is_qra more accurate (from Mark HB9DBM).
+04Jul02=======================================================================
+1. added another fix to Prefix.pm so that it resolves Japan callsigns again
+also you can 'set/debug prefix' to see what it is trying to do.
+03Jul02=======================================================================
+1. Added the DEMONSTRATE command which allows a sysop to demonstrate a
+command to a user (from a request by Charlie K1XX).
+2. added message e31 (xxxx is not a user)
+02Jul02=======================================================================
+1. Fixed the problem with badspotter or badnode being set to baddx if either
+of the data files are missing.
+25Jun02=======================================================================
+1. as predicted there was an error in the Prefix routine, I have improved it.
+24Jun02=======================================================================
+1. make set/badspotter non SSID sensitive. Set/badnode is left to be SSID
+sensitive.
+2. added 3XA(=3X) and K1B(=KH1) also changed the logic of sh/prefix. This
+may break things, please test it.
+19Jun02=======================================================================
+1. make set/badspotter and set/badnode apply to announces and talks as well
+as spots.
+12Jun02=======================================================================
+1. fixed (un)set/wwv and (un)set/wcy so they don't issue spurious messages.
+Thanks Rene (oz1lqh)
+07Jun02=======================================================================
+1. fix messages in DXDb.pm to point to the correct ones. Thanks Rene (oz1lqh)
+2. add missing wcys and wcyu messages to Messages. Thanks Rene (again)
+3. upissue version number to 1.50 (finally)
+16Apr02=======================================================================
+1. allow the rest of PC19 to continue if it contains a reference to a locally
+connected node. Thank you Tommy SM3OSM.
+19Mar02=======================================================================
+1. fix problems with ephemeral dup checking on PC16,17,19,21
+2. perturb the problem with national character sets.
+15Mar02=======================================================================
+1. add help for 'accept' and 'reject'. (g0vgs)
+2. adjustments to the manuals (g0vgs)
+3. make changes to reflect the correct output of sh/sun and sh/moon based
+on information from Steve, K9AN. (g0vgs)
+23Feb02=======================================================================
+1. remove old satellites from keps.
+2. Add information on setting up the ax25 utils to the installation manual
+(g0vgs)
+19Feb02=======================================================================
+1. move the PC11 dup check after the input filter
+06Feb02=======================================================================
+1. changes to manuals to (hopefully) improve documentation and alter my email
+address (g0vgs)
+02Feb02=======================================================================
+1. changed sh/qrz to the latest incarnation of the command at qrz.com.
+29Jan02=======================================================================
+1. add VP8GEO to South Georgia
+27Jan02=======================================================================
+1. make save work in cron context
+2. try to get the C client to handle closes on its standard input better
+3. put some validation in cluster.pl to check that people have set it up
+handled.
+4. fix the long callsign checking
+22Jan02=======================================================================
+1. limit spot dupe checking to first 12 characters
+13Jan02=======================================================================
+1. changed the backstop termination alarm routing in the C client so that
+it flushes the input and output buffer and then commits suicide.
+12Jan02=======================================================================
+1. put setsockopts into eval block to allow some of them to fail
+11Jan02=======================================================================
+1. Make M$ TCP connx blocking again, sigh...
+2. backed out ALL the M$ speedup and make nicer changes :-(
+3. cope with data coming in during the disconnection process. Don't worry
+Earth people, this will take no longer than 15 of your Earth seconds...
+10Jan02=======================================================================
+1. set SO_LINGER = 0 to try to prevent the system sending data on a closing
+socket. This MAY help some of the hanging problems (but I am now beginning
+to doubt this).
+2. do the same on the C client (which means DON'T FORGET to make it).
+3. set no nagling on the output from the node.
+4. set KEEPALIVE on TCP connections for both the node and C Client (you will
+have to make the C client again) and you will need to restart.
+5. It appears that it IS possible to set non blocking on M$ you just need to
+know how.
+6. Fix problem with load/cmd_cache core dumping the system
+08Jan02=======================================================================
+1. altered sh/qrz to point to the new server
+2. alter the character set handling a bit to make it better for spanish
+06Jan02=======================================================================
+1. fix leading space removal from messages input from the keyboard
+2. make some mods to allow perl 5.7.2 to run
+3. create $DXProt::eph_restime to allow variable slugging of ephemeral dups
+4. create $DXProt::eph_info_restime to allow a long dupe time for these
+5. create $DXProt::eph_pc34 to allow a short anti dupe slug for rcmd loops
+6. Add a new sysop cmd 'save' which will save the output of any command (or
+list of commands in "<cmd>") to a file.
+7. Add a new command "echo" which echos its argument to the screen (useful
+for titling in the save command above.
+8. Increase interval between logins causing for/opernam to 60 days (from 30)
++ a random factor between 0 and 9.
+9. Added Italian translation of Messages from Luca IT9ROT (thank you
+very much).
+10. Added the /<cmd> feature (as in talk) to execute a cmd whilst typing a
+message, then enhanced it so that if you do //sh/dx (for instance) it will
+put the result into the message (as well as show it to you).
+11. Added the // feature to talk as well.
+02Jan02=======================================================================
+1. updated the copyright dates
+2. modernised and extended the Windows instructions a bit.
+3. added a TODO file which is the list of things that I need to do. Please
+badger me to put YOUR enhancement on this list. It will then get done.
+31Dec01=======================================================================
+1. Make a couple of changes to the Installation Manual and add a FAQ on msg
+deletion. (g0vgs)
+2. Fix unset/register so it works (g0vgs)
+30Dec01=======================================================================
+1. make PC21 coming from the channel's node call then treat it as a PC39 and
+disconnect it.
+2. Send the client a 'Z' command (shutdown) to see if this has any effect on
+the hangs.
+26Dec01=======================================================================
+1. make some detail changes to help texts
+2. Added 'all' to the Band's region table to allow 'acc/spot on all/cw'
+23Dec01=======================================================================
+1. allow sh/dx on 1000/4000 (or 1000-4000).
+2. merge sh/dx and sh/dxcc commands (Alias sh/dxcc to sh/dx dxcc). You can
+now do things like 'sh/dxcc oq2 by w dxcc'.
+20Dec01=======================================================================
+1. Fix 'not' in filtering
+2. alter default max spots to 100 and the no of WWV to 5
+17Dec01=======================================================================
+1. added new satellite stuff from Steve K9AN. Fixed upper/lower problem
+in convkeps.pl.
+2. enhanced load/keps to accept a message no. This will create a new keps
+file from a msg (hopefully containing 2 Line Nasa keps) and then load - all
+in one step. Added load/keps to the help files
+3. Updated spanish Messages
+4. Improve wcy command from Stephan DK8LV's input
+5. Added set/prompt (and unset/prompt) command so that Stephan can fool some
+external programs into thinking it is talking to clx.
+15Dec01=======================================================================
+1. added superfluous spaces back into PC73 for the benefit of clx
+14Dec01=======================================================================
+1. make Spanish in set/lang & Messages 'es' instead of 'sp'
+2. added prototype WCY and WWV commands (for qualified users only)
+3. Added Commands_es.hlp contributed by Angel EA7WA
+12Dec01=======================================================================
+1. added Commands_de.hlp contributed (in record time) by Stephan DK8LV.
+2. fixed help command so it uses it!
+11Dec01=======================================================================
+1. make PC17 generation more unconditional
+08Dec01=======================================================================
+1. added unset/hops command
+02Dec01=======================================================================
+1. Fix spurious 'new message for you' messages if things are deleted but
+unread.
+2. stop remote passive nodes (those with version numbers of 0000) from
+poluting the nodes table. Maybe this will make things slightly more stable.
+3. Take off rspf checks on announces and spots and allow the dupe filters
+to take the strain.
+4. Move the dupe checking AFTER the input filtering for announces and spots.
+5. Changed the checking of PC19/21 that it doesn't alter the wrong node
+6. Alter the storage of messages so that illegal characters are stored as '.'
+in an attempt to stop such messages from hanging.
+26Nov01=======================================================================
+1. Make changes to the installation manual to show making the client before
+actually trying to use it! Thanks to oz1lqh. Also add a line for SuSE
+distros on useradd.
+22Nov01=======================================================================
+1. finally fix DELETE = ^H = Backspace in console.pl
+21Nov01=======================================================================
+1. altered the PC16/17 generation slightly to see whether this cures Roland's
+problem.
+19Nov01=======================================================================
+1. added Ducie Island to prefixes
+17Nov01=======================================================================
+1. updated the Java Web Interface from Ian, m0azm to allow passwords. If
+a user with no password enters anything, including null, it is happily
+accepted and ignored.
+2. added the German language to the Messages file from Stephan, dk8lv
+14Nov01=======================================================================
+1. make the number of characters of the dx comment dependant on the type of
+connection. This should mean that 'legacy' user programs can cope.
+2. move the handling of unprintable characters out of IntMsg
+07Nov01=======================================================================
+1. fix is_pctext so that it actually catches corrupt spots and announces.
+2. fix console.pl so that you can type in '0' again
+3. Fix problem with reply disappearing up its own bottom.
+4. Added Steve's latest sh/moon stuff
+06Nov01=======================================================================
+1. fix read so that sysop reading doesn't increment the read counter for
+private mail not addressed to them.
+2. fix console.pl to show blank lines more reliably.
+3. fix msgs so that 2 R: lines are only stored on initial entry (not just
+after forwarding).
+04Nov01=======================================================================
+1. Allow the user to equal the node in RSPF checks (this allows spots and
+stuff with the origin and spotter to be the same (although it is STRONGLY
+recommended that they are NOT!!! [hint hint]).
+2. make the send command rather more sensitive to what is allowed. Basically
+it will only allow TO addresses that are bull addresses (if not private) or
+vaild callsigns (if private). Bull addresses are the ones in
+/spider/msg/forward.pl with a 'T' flag on them. If there is no forward
+file it will only allow 'ALL' and 'DX' as valid Bull TO addresses. You may
+use commas as callsign separators if you like.
+02Nov01=======================================================================
+1. fixed some Aliasing problems, but this whole area will have to be addressed
+more comprehensively.
+2. Changed talk logging so that it hopefully is more consistant and maybe even
+useful.
+3. Altered the mechanism of the personal emailing so that it uses lower level
+components and should be therefore available on M$ platforms. You will need
+to install a version of libnet (perl -MCPAN -eshell, then install Net::SMTP).
+I believe all 5.6.x perls have this built in (ie M$ should have this). If you
+are on M$ or you want to use an MTA via SMTP in linux then you need to declare
+the dns name of the MTA by: set/var $DXMsg::email_server = 'post.fred.net'
+(or whatever the MTA is called). You can also use local programs other than
+sendmail by: set/var $DXMsg::email_prog = '/usr/bin/postfix ..' or whatever.
+Finally you can alter the 'from' address using: set/var $DXMsg::email_from
+= 'FBloggs@msn.com' (\@ if you use " and ") - bewarned that you may be
+prevented from using just any old address. You can place these commands in
+/spider/scripts/startup for permanent use.
+01Nov01=======================================================================
+1. added information on registration, login scripts and passwords to the
+26Oct01=======================================================================
+1. If $main::reqreg = 1 then set/register will allow 'registered' users
+full access, if $main::reqreg = 2 then registered users will be 'read-only'
+(ie the opposite). If $main::reqreg = 0 then registration and its effects
+are disabled.
+25Oct01=======================================================================
+1. added unset/password command to allow sysops (only) to completely delete
+and remove a user's password.
+2. make 'read' increment the 'no of times read' for all messages.
+3. give a read receipt for everybody that reads a message so marked.
+4. enhance set/email so that if you set email address(es) with this command
+it will send any messages to your callsign as they come in. unset/email
+will disable forwarding.
+24Oct01=======================================================================
+1. added (un)set/register, show/registered commands which when a 'set/var
+$main::reqreg = 1' is done in the startup script will require users to
+be 'registered' in order for them to have 'write' access to the node. Non-
+registered users will only be allowed to TALK or SEND PRIVATE to the cluster
+sysop callsign.
+2. Added password interrogation to the ExtMsg connections. If a user comes
+in via telnet and this is being done with the internal listener and a pass-
+word has been set for that user - he will be asked for it. You can force
+a password interrogation (for ALL users) with a 'set/var $main::passwdreq = 1'
+in the node's startup script. It is anticipated that if you are using
+registration you will also issue passwords to those registered users.
+3. set/password has been changed so that users already with passwords can
+change them.
+4. A non-registered user will get the /spider/data/motd_nor file instead of
+the motd on login.
+5. made the BadWord regexes slightly less aggressive WARNING this may let
+some constructions thru, but hopefully will also allow more legitimate
+foreign (mainly) things thru as well.
+19Oct01=======================================================================
+1. Allow DELETE (0x7f) for backspace in console.pl
+2. redo prefix table using latest cty.dat
+14Oct01=======================================================================
+1. Add the shortform SH/ST like display to sh/user <call> to make it more
+AK1A compatible (G0RDI+G4PDQ pace).
+12Oct01=======================================================================
+1. make del nnn delete messages again (fix system Aliases file)
+2. substr the subject so that the dup works for stuff coming back via AK1A
+09Oct01=======================================================================
+1. change Aliases to allow shutdown as a command again. If you have changed
+/spider/cmd/Aliases and you update from CVS you may find it better to remove
+this file and then do another 'cvs update'. Otherwise you may get conflicts
+and the Aliase file will not load properly. The cvs update will recreate
+the (now) missing file.
+2. Remove the 'please don't use XXXX on here' messages to prevent people
+from exploring the 'bad words space'. Three bad words will still disconnect
+without warning.
+3. Sending dx spots/announces with bad words will succeed - but only back to
+the sender. These two mods are designed to annoy the perpitrators of the
+sort of filth as much as possible whilst not inconveniencing 'normal' users.
+4. Add expunge feature to kill. Deleting messages now marks a msg for
+deletion two days hence. To have the old behaviour, do a 'kill exp' or use
+the standard alias "expunge". This will cause the message to be deleted at
+the next queue message cycle.
+5. Put in prototype echo handling for direct connections using ExtMsg and
+Listeners.pm.
+6. fix msgs to g1tlh-2 (as opposed to g1tlh)
+04Oct01=======================================================================
+1. allow a residence time of (default) 2 days before actually deleting a msg.
+2. reduce the number R: lines on a bull from a bbs to 2 (the origin and the
+last port of call).
+3. ignore deleted messages for queuing purposes
+4. store deleted status across restarts!
+5. make callsign checking more rigorous
+6. dup check PC49 (kill full)
+7. improved the regex matching of badwords (more efficient, better coverage)
+8. added default badword and badw_regex tables (as .issue files) which will
+activate unless there is one there already. It will NOT overwrite an existing
+file - so if you change it your changes will remain intact.
+03Oct01=======================================================================
+1. don't allow @WWW to become a 'TO' field...
+2. handle @gb7tlh.#35.eu type addresses as well
+02Oct01=======================================================================
+1. fixed the 'ever lengthening msg' syndrome and probably made the whole
+thing more reliable at the same time.
+2. do some restructuring of the msg system and upissue the version no.
+3. fix @xxxx syntax for bbs input
+01Oct01=======================================================================
+1. made login info not the default
+2. change the looping protoection for PC16/17/19/21 and also be more rigorous
+in who we accept which PC16/17/21's from.
+3. fix MAJOR disconnect bug introduced accidentally in the NP work.
+4. Try each badword with an S on the end as well and also check for 'f.u c'
+type things as well (this only works for a few wellknown english ones).
+5. Go back to the old way of caching commands (but without the silly warnings
+because I know better what I am doing now). This allows symbolic debugging
+of commands again without coredumps. Hurrah!
+6. Add badword handling for messages. Users will get rude messages back if
+they try to send naughty words in msgs. Incoming messages with badwords will
+be dropped on receipt and their contents logged.
+7. and if you swear 3 or more times you are unceremoniously logged out.
+30Sep01=======================================================================
+1. made some small bug fixes in rspf checking and also messages.
+23Sep01=======================================================================
+1. I have incorporated Steve's (K9AN) lastest sh/sun and sh/moon stuff which
+copes much better with some of the end effects that occur in these calc-
+ulations. You can now also see up to a year into the past or future. The
+results compare favourably with the US Naval Obs (unlike certain other
+software's output which "I would not want to use their results to aim my
+moon rocket..."). It also fixes some ambiguity about which day the results
+are actually for.
+21Sep01=======================================================================
+1. fix set/lockout so that it is possible to lock out all SSIDs except those
+specifically unlocked and so that you don't need to lock the non-SSID call in
+order to lock an SSID call. So set/lock g1tlh will lock out all instances of
+g1tlh, g1tlh-1, g1tlh-15 etc except (for instance) unset/lock g1tlh-9.
+2. show/lock allows partial callsign matching so sh/lock gb7 will only show
+GB7* calls that are locked.
+3. Had a grand shift around for the start of NP.
+19Sep01=======================================================================
+1. put in some rudimentory rsfp checking for various things
+2. tried to do some fixes on console.pl - YOU WILL REQUIRE Curses 1.06 from
+CPAN (perl -MCPAN -eshell, then at cpan> install Curses).
+17Sep01=======================================================================
+1. Fixed help and apropos commands so that they default to english if
+the language is not english and help in the 'not english' language isn't
+available.
+2. added some help text for sh/newc.
+15Sep01=======================================================================
+1. released 1.48
+2. found 1st bug, fixed unset/logininfo reseting itself after logout
14Sep01=======================================================================
1. added the start of script files on login/startup. You can now add
commands (for example to set variables) to a file called
no longer see many of the of talk like announces. Unfortunately you may
miss the odd useful one as well (but since everything is repeated many times
you probably won't :-)
+3. centralise the invalid callsign check so that g1tlh1 and similar calls
+will not be allowed to login anymore.
+4. Fiddle with the lockout mechanism so that set/login g1tlh also locks out
+g1tlh-1 -> g1tlh-15 UNLESS one of these is specifically unlocked.
+5. Make sh/log only show stuff that sh/ann, sh/talk, sh/rcmd doesn't.
+6. Make the scripts look for user and node_default files if there isn't a
+more specific one.
+7. add the blank command which prints nn blank lines (default 1), this cmd
+can also print lines of characters: see help for examples.
13Sep01=======================================================================
1. did some work on making talk more intelligent and fixed a>b problem.
2. fixed a nasty problem on input when being hit with full buffers of