EXPORT 2345 /tmp/a
+=== 9^EXPORT_USERS [<filename>]^Export the users database to ascii
+Export the users database to a file in ascii format. If no filename
+is given then it will export the file to /spider/data/user_asc.
+
+If the file already exists it will be renamed to <filename>.o. In fact
+up to 5 generations of the file can be kept each one with an extra 'o' on the
+suffix.
+
+BE WARNED: this will write to any file you have write access to. No check is
+made on the filename (if any) that you specify.
=== 1^FORWARD/OPERNAME <call>^Send out information on this <call> to all clusters
This command sends out any information held in the user file which can
again. Execute this command to reset everything back to the state it
was just after a cluster restart.
+=== 9^LOAD/FORWARD^Reload the msg forwarding routing table
+Reload the /spider/msg/forward.pl file if you have changed it
+manually whilst the cluster is running.
+
=== 9^LOAD/MESSAGES^Reload the system messages file
If you change the /spider/perl/Messages file (usually whilst
fiddling/writing new commands) you can have them take effect during a
=== 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal
=== 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal
+=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
+
=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal
=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
+=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
+
=== 9^SET/DEBUG <name>^Add a debug level to the debug set
=== 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
+=== 0^SET/DXGRID^Allow Grid Squares on the end of DX announcements
+=== 0^UNSET/DXGRID^Stop Grid Squares on the end of DX announcements
+A standard feature which is enabled in version 1.43 and above is
+that if the spotter's grid square is known it is output on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. You can use this command to reset (or set)
+this feature.
+
+=== 5^SET/DXNET <call> [<call>..]^Make the callsign an DXNet node
+
=== 0^SET/ECHO^Make the cluster echo your input
=== 0^UNSET/ECHO^Stop the cluster echoing your input
If you are connected via a telnet session, different implimentations
Tell the system what your name is eg:-
SET/NAME Dirk
-=== 9^SET/NODE <call> [<call>..]^Make the callsign an AK1A cluster
+=== 5^SET/NODE <call> [<call>..]^Make the callsign an AK1A cluster
Tell the system that the call(s) are to be treated as AK1A cluster and
fed PC Protocol rather normal user commands.
-=== 9^SET/OBSCOUNT <count> <nodecall>^Set the 'pump-up' obscelence counter
+=== 8^SET/OBSCOUNT <count> <nodecall>^Set the 'pump-up' obscelence counter
From 1.35 onwards neighbouring nodes are pinged at regular intervals (see
SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'
counter which is decremented on every outgoing ping and then reset to
spaces - but they won't appear in the password). You can see the
result with STAT/USER.
-=== 9^SET/SPIDER <call> [<call>..]^Make the callsign an DXSpider node
+=== 5^SET/SPIDER <call> [<call>..]^Make the callsign an DXSpider node
Tell the system that the call(s) are to be treated as DXSpider node and
fed new style DX Protocol rather normal user commands.
=== 5^SHUTDOWN^Shutdown the cluster
Shutdown the cluster and disconnect all the users
+=== 9^SPOOF <call> <command>^Do a command as though you are another user
+This command is provided so that sysops can set a user's parameters without
+me having to write a special 'sysop' version for every user command. It
+allows you to pretend that you are doing the command as the user you specify.
+
+eg:-
+
+ SPOOF G1TLH set/name Dirk
+ SPOOF G1TLH set/qra JO02LQ
+
=== 5^STAT/DB <dbname>^Show the status of a database
Show the internal status of a database descriptor.
numbers but nothing will happen when you input a string. Any match is
case sensitive.
-=== 0^TALK <call> <text>^Send a text message to another station
-=== 0^TALK <call> > <node> <text>^Send a text message to another station via a node
+=== 0^TALK <call> [<text>]^Send a text message to another station
+=== 0^TALK <call> > <node> [<text>]^Send a text message to another station via a node
Send a short message to any other station that is visible on the cluster
system. You can send it to anyone you can see with a SHOW/CONFIGURATION
command, they don't have to be connected locally.
see GB7TLH in the SH/C list but with no users, then you would use the
second form of the talk message.
+If you want to have a ragchew with someone you can leave the text message
+out and the system will go into 'Talk' mode. What this means is that a
+short message is sent to the recipient telling them that you are in a
+'Talking' frame of mind and then you just type - everything you send will
+go to the station that you asked for.
+
+All the usual announcements, spots and so on will still come out on your
+terminal.
+
+If you want to do something (such as send a spot) you preceed the normal
+command with a '/' character, eg:-
+
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
+
+To leave talk mode type:
+
+ /EX
+
=== 0^TYPE <filearea>/<name>^Look at the contents of a file in one of the fileareas
Type out the contents of a file in a filearea. So, for example, in
filearea 'bulletins' you want to look at file 'arld051' you would