-#!/usr/bin/perl
+# -*- perl -*-
#
# this file contains the system messages. Don't forget to reload them
# if you change them (load/messages)
%msgs = (
en => {
addr => 'Address set to: $_[0]',
- already => '$_[0] already connnected',
- anns => 'Announce flag set on $_[0]',
- annu => 'Announce flag unset on $_[0]',
+ already => '$_[0] already connnected',
+ anns => 'Announces enabled for $_[0]',
+ annu => 'Announces disabled for $_[0]',
+ annts => 'AnnTalk enabled for $_[0]',
+ anntu => 'AnnTalk disabled for $_[0]',
+ badnode1 => '$_[0] is now a bad node',
+ badnode2 => '$_[0] is now a good node',
+ badnode3 => 'List of Bad Nodes:-',
bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
bbs => 'Your BBS Address is now \"$_[0]\"',
beepoff => 'Beeps are now off',
beepon => 'Beeps are now on',
- conother => 'Sorry $_[0] you are connected on another port',
- concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster',
+ call1 => 'Callsign lookup via $_[0]:',
+ conother => 'Sorry $_[0] you are connected to me on another port',
+ concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
confail => 'connection to $_[0] failed ($_[1])',
constart => 'connection to $_[0] started',
+ deluser => 'User $_[0] has been deleted',
+ db1 => 'This database is hosted at $_[0]',
+ db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
+ db3 => 'Sorry, database $_[0] doesn\'t exist here',
+ db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
+ db5 => 'Accessing remote database on $_[0]...standby...',
+ db6 => 'Database $_[0] already exists, delete it first',
+ db7 => 'Database $_[0] created for remote node $_[1]',
+ db8 => 'Database $_[0] created locally',
+ db9 => 'Database $_[0] removed',
+ db10 => '$_[0] records imported into $_[1]',
+ db11 => 'Sending your request(s) to $_[0], please stand by...',
+ dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
+ dir1 => 'No messages found',
disc1 => 'Disconnected by $_[0]',
- disc2 => '$_[0] disconnected',
+ disc2 => 'Channel $_[0] disconnected',
+ disc3 => 'No Channel, but connection $_[0] disconnected',
+ disc4 => 'No Channel or connection but orphan $_[0] disconnected',
+ done => 'Done',
+ dup => 'Sorry, this is a duplicate',
dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
- dxs => 'DX Spots flag set on $_[0]',
- dxu => 'DX Spots flag unset on $_[0]',
+ dx3 => 'The callsign or frequency is invalid',
+ dxs => 'DX Spots enabled for $_[0]',
+ dxu => 'DX Spots disabled for $_[0]',
e1 => 'Invalid command',
e2 => 'Error: $_[0]',
e3 => '$_[0]: $_[1] not found',
e11 => 'Can\'t use $main:mycall as target',
e12 => 'Need a node callsign',
e13 => '$_[0] is not a node',
+ e14 => 'First argument must be numeric and > 0',
+ e15 => 'invalid qualifier \"$_[0]\"',
+ e16 => 'File \"$_[0]\" exists',
+ e17 => 'Please don\'t use the words: @_ on here',
+ e18 => 'Cannot connect to $_[0] ($!)',
+ e19 => 'Invalid character in line',
+ e20 => 'token $_[0] not recognised',
+ e21 => '$_[0] not numeric',
+ e22 => '$_[0] not a callsign',
+ e23 => '$_[0] not a range (eg 0/30000)',
+ e24 => 'Sorry, Internet access is not enabled',
+ e25 => 'Sorry the value must be between $_[0] and $_[1]',
+ e26 => 'Too many concurrent errors, you are being disconnected',
+ e27 => '$_[0] not a numeric or a callsign prefix',
+ e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
+ e29 => 'Need a password',
+ e30 => 'Cannot Open $_[0] $!',
+ e31 => '$_[0] is not a user',
+ e32 => 'Need a passphrase',
+ e33 => '$_[0] is not a number of days or a valid date',
+
+ echoon => 'Echoing enabled',
+ echooff => 'Echoing disabled',
+ echow => '*Echoing is currently disabled, set/echo to enable',
emaile1 => 'Please enter your email address, set/email <your e-mail address>',
emaila => 'Your E-Mail Address is now \"$_[0]\"',
email => 'E-mail address set to: $_[0]',
+ export1 => 'usage: export <msgno> <filename>',
+ export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
+ export3 => '$_[2 ] exported msg $_[0] to $_[1]',
+ filter1 => 'Filter $_[0] updated for $_[1]',
+ filter2 => 'Unknown filter keyword $_[0]',
+ filter3 => 'No filters defined for $_[0]',
+ filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
+ filter5 => 'need some filter commands...',
+ filter6 => '$_[0]$_[1] Filter for $[2] not found',
+ grids => 'DX Grid enabled for $_[0]',
+ gridu => 'DX Grid disabled for $_[0]',
+ illcall => 'Sorry, $_[0] is an invalid callsign',
+ hasha => '$_[0] already exists in $_[1]',
+ hashb => '$_[0] added to $_[1]',
+ hashc => '$_[0] removed from $_[1]',
+ hashd => '$_[0] not in $_[1]',
+ hashe => '$_[0] set on $_[1]',
helpe1 => 'Help system unavailable, tell sysop',
helpe2 => 'No help available on $_[0]',
heres => 'Here set on $_[0]',
iso => '$_[0] Isolated',
isou => '$_[0] UnIsolated',
isoc => '$_[0] created and Isolated',
+ isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
+ isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
+ isow => '$_[0] is isolated; unset/isolate $_[0] first',
l1 => 'Sorry $_[0], you are already logged on on another channel',
- l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
- lang => 'Language is now $_[0]',
+ l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
+ lang => 'Language is now English',
lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
lange2 => 'failed to set language on $_[0]',
lh1 => '$main::data/hop_table.pl doesn\'t exist',
loce1 => 'Please enter your location,, set/location <latitude longitude>',
loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
+ loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
loc => 'Your Lat/Long is now \"$_[0]\"',
lockout => '$_[0] Locked out',
lockoutc => '$_[0] Created and Locked out',
lockoutun => '$_[0] Unlocked',
- m1 => 'Enter Subject (30 characters) >',
+ lockoutuse => 'usage: sh/lockout <call>|ALL',
+ loginu => 'User $_[0] has logged in',
+ logoutu => 'User $_[0] has logged out',
+ loginn => 'Node $_[0] has logged in',
+ logoutn => 'Node $_[0] has logged out',
+ m1 => 'Enter Subject (30 characters):',
m2 => 'Copy of msg $_[0] sent to $_[1]',
m3 => 'Sorry, $_[0] is an unacceptable TO address',
m4 => 'Sorry, can\'t access message $_[0]',
m14 => 'Message no $_[0] marked as sent to $_[1]',
m15 => 'Message no $_[0] unmarked as sent to $_[1]',
m16 => 'Need a Message number',
- msg1 => 'Bulletin Messages Queued',
- msg2 => 'Private Messages Queued',
+ m17 => 'Sorry, cannot send messages in $_[0] mode',
+ m18 => 'Sorry, message $_[0] is currently set to KEEP',
+ msg1 => 'Bulletin Messages Queued',
+ msg2 => 'Private Messages Queued',
msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
msgu => 'usage: msg <cmd> <msgno> data...',
merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
+ moon => 'Location dd/mm/yyyy Rise Set',
+ moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
+ mond => 'Monitoring Disabled',
+ mone => 'Monitoring Enabled',
namee1 => 'Please enter your name, set/name <your name>',
namee2 => 'Can\'t find user $_[0]!',
name => 'Your name is now \"$_[0]\"',
- node => '$_[0] set as AK1A style Node',
+ nodea => '$_[0] set as AK1A style Node',
+ nodeac => '$_[0] created as AK1A style Node',
+ nodeb => '$_[0] set as BBS',
+ nodebc => '$_[0] created as BBS',
+ nodec => '$_[0] set as CLX style Node',
+ nodecc => '$_[0] created as CLX style Node',
+ noder => '$_[0] set as AR-Cluster style Node',
+ noderc => '$_[0] created as AR-Cluster style Node',
+ nodes => '$_[0] set as DXSpider style Node',
+ nodesc => '$_[0] created as DXSpider style Node',
+ nodex => '$_[0] set as DXNET style Node',
+ nodexc => '$_[0] created as DXNET style Node',
nodeu => '$_[0] set back as a User',
- nodec => '$_[0] created as AK1A style Node',
nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
+ notdone => 'NOT Done',
+ nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
+ obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
ok => 'Operation successful',
+ outconn => 'Outstanding connect to $_[0]',
page => 'Press Enter to continue, A to abort ($_[0] lines) >',
pagelth => 'Page Length is now $_[0]',
passerr => 'Please use: SET/PASS <password> <callsign>',
+ passphrase => 'Passphrase set or changed for $_[0]',
+ passphraseu => 'Passphrase removed for $_[0]',
password => 'Password set or changed for $_[0]',
+ passwordu => 'Password removed for $_[0]',
+ pc90s => 'PC90 enabled for $_[0]',
+ pc90u => 'PC90 disabled $_[0]',
pingo => 'Ping Started to $_[0]',
- pingi => 'Ping Returned from $_[0] ($_[2] secs)',
- pr => '$_[0] de $main::mycall $main::cldate $main::ztime >',
- pr2 => '($_[0]) de $main::mycall $main::cldate $main::ztime >',
+ pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
+ pinge1 => 'Cannot ping yourself!',
+ pingint => 'Ping interval on $_[0] set to $_[1] secs',
+ 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ prs => 'Prompt now set to \"$_[0]\"',
+ pru => 'Prompt now set back to default',
priv => 'Privilege level changed on $_[0]',
prx => '$main::mycall >',
+ pw0 => 'Enter old password: ',
+ pw1 => 'Enter new password: ',
+ pw2 => 'Re-enter new password: ',
+ pw3 => 'Password changed',
+ pw4 => 'Passwords differ, password NOT changed',
qll => 'Please enter your location with set/location or set/qra',
qthe1 => 'Please enter your QTH, set/qth <your qth>',
qth => 'Your QTH is now \"$_[0]\"',
read1 => 'Sorry, no new messages for you',
read2 => 'Msg $_[0] not found',
read3 => 'Msg $_[0] not available',
+ rec => '$_[0] records',
+ reg => '$_[0] registered',
+ regc => '$_[0] created and registered',
+ reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
+ regun => '$_[0] unregistered',
+ route => '$_[0] on $_[1] via $_[2]',
+ sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
+ sat4 => 'Satellites available/Age of Keps (days):-',
+ sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
+ satnf => 'Satellite $_[0] unknown',
+ satdisc => '-----',
+ set => '$_[0] enabled for $_[1]',
+ sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
+ sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
+ sethop3 => 'No hops set for $_[0]',
+ shu => '\"SHU\" is not enough! you need to type at least \"SHUT\" to shutdown the node',
shutting => '$main::mycall shutting down...',
sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ snode1 => 'Node Call Sort Version',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Unknown Call',
sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
sorry => 'Sorry',
+ spf1 => 'spoof: creating new user $_[0]',
+ stathf => 'HF DX Spot Stats, last $_[1] days from $_[0]',
+ stathft => 'HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, last $_[1] days from $_[0]',
+ statvhft => 'VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
+ statdx => 'Total DX Spots for $_[1] days from $_[0]',
+ sun => 'Location dd/mm/yyyy Rise Set',
+ sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
+ susdb1 => 'usage: callsign state city',
+ susdb2 => 'USDB $_[0] was $_[1], $_[2]',
+ susdb3 => 'USDB $_[0] now $_[1], $_[2]',
+ susdb4 => 'USDB $_[0] deleted',
suser1 => 'usage: callsign user_field_name value',
suser2 => 'User $_[0] not found',
suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
suser4 => 'User field name \'$_[0]\' doesn\'t exist',
- talks => 'Talk flag set on $_[0]',
- talku => 'Talk flag unset on $_[0]',
+ time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Talk enabled for $_[0]',
+ talku => 'Talk disabled for $_[0]',
+ talkend => 'Finished talking to you',
+ talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
+ talknh => 'Sorry $_[0] is not online at the moment',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Starting talking to you',
+ unset => '$_[0] disabled for $_[1]',
+ unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
+ unsethop2 => 'hops unset on $_[1] for $_[0]',
usernf => '*** User record for $_[0] not found ***',
- wwvs => 'WWV flag set on $_[0]',
- wwvu => 'WWV flag unset on $_[0]',
- wxs => 'WX flag set on $_[0]',
- wxu => 'WX flag unset on $_[0]',
- },
- nl => {
- addr => 'Addres gezet op: $_[0]',
- already => '$_[0] reeds geconnect',
- anns => 'Announce berichten AAN gezet voor $_[0]',
- annu => 'Announce berichten UIT gezet voor $_[0]',
- bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
- bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
- beepoff => 'De beep staat nu UIT',
- beepon => 'De beep staat nu AAN',
- conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
- concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
- conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
- confail => 'Verbinding met $_[0] mislukt ($_[1])',
- constart => 'Verbinding met $_[0] gestart',
- disc1 => 'Gedisconnect door $_[0]',
- disc2 => '$_[0] gedisconnect',
- dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
- dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
- dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
- dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
- e1 => 'Ongeldige opdracht',
- e2 => 'Fout: $_[0]',
- e3 => '$_[0]: $_[1] niet gevonden',
- e4 => 'Minimaal een prefix of een call nodig',
- e5 => 'Niet toegestaan',
- e6 => '*** Geen station gespecifiseerd ***',
- e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
- e8 => 'Ik heb een call en tekst nodig',
- e9 => 'Ik heb wel tekst nodig voor een announce!',
- e10 => '$_[0] is niet lokaal verbonden',
- e12 => 'Ik heb een node call nodig',
- e13 => '$_[0] is geen node',
- emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
- emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
- email => 'E-mail addres gezet op: $_[0]',
- helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
- helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
- heres => 'Aanwezigheid AAN gezet voor $_[0]',
- heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
- hereu => 'Aanwezigheid UIT gezet voor $_[0]',
- homebbs => 'Uw Home mailbox is nu $_[0]',
- homenode => 'Uw (Home) DX-Cluster is : $_[0]',
- hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
- hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
- iso => '$_[0] is geisoleerd (Isolated)',
- isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
- isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
- l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
- l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
- lh1 => '$main::data/hop_table.pl bestaat niet',
- loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
- loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
- loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
- lockout => '$_[0] heeft geen toegang meer (Locked out)',
- lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
- m2 => '$_[0] Informatie: $_[1]',
- merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
- msgnew => 'Er is nieuwe post gearriveerd voor u',
- namee1 => 'Geef aub uw naam met, set/name <uw naam>',
- namee2 => 'Gebruiker $_[0] niet te vinden!',
- name => 'Uw naam is gezet op \"$_[0]\"',
- node => '$_[0] gezet als een AK1A stijl DX-cluster',
- nodeu => '$_[0] teruggezet naar gebruiker status',
- nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
- nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
- ok => 'Opdracht succesvol uitgevoerd',
- page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
- pagelth => 'Paginalengte gezet op ($_[0]) regels',
- passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
- password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
- pingo => 'Ping gestart naar $_[0]',
- pingi => 'Ping ontvangen van $_[0] ($_[2] secs)',
- pr => '$_[0] de $main::mycall $main::cldate $main::ztime >',
- pr2 => '($_[0]) de $main::mycall $main::cldate $main::ztime >',
- priv => 'Privilege level gewijzigd op $_[0]',
- prx => '$main::mycall >',
- qll => 'Geef uw locator met set/location of set/qra',
- qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
- qth => 'Uw QTH is nu \"$_[0]\"',
- qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
- qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
- qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
- qra => 'Uw QRA Locator is nu \"$_[0]\"',
- rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
- read1 => 'Sorry, geen berichten voor u',
- read2 => 'Bericht $_[0] niet gevonden',
- read3 => 'Bericht $_[0] niet beschikbaar',
- shutting => '$main::mycall gaat QRT...',
- sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
- sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
- talks => 'Talk berichten AAN gezet voor $_[0]',
- talku => 'Talk berichten UIT gezet voor $_[0]',
- usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
- wwvs => 'WWV berichten AAN gezet voor $_[0]',
- wwvu => 'WWV berichten UIT gezet voor $_[0]',
- wxs => 'WX berichten AAN gezet voor $_[0]',
- wxu => 'WX berichten UIT gezet voor $_[0]',
- },
- fr => {
- },
- de => {
+ usstates => 'US State display enabled for $_[0]',
+ usstateu => 'US State display disabled for $_[0]',
+ wcy1 => '$_[0] is missing or out of range',
+ wcy2 => 'Duplicate WCY',
+ wcys => 'WCY enabled for $_[0]',
+ wcyu => 'WCY disabled for $_[0]',
+ wpc16s => 'Allow PC16 from $_[0] enabled',
+ wpc16u => 'Allow PC16 from $_[0] disabled',
+ wpc19s => 'Route PC19 for $_[0] enabled',
+ wpc19u => 'Route PC19 for $_[0] disabled',
+ wwv1 => '$_[0] is missing or out of range',
+ wwv2 => 'Duplicate WWV',
+ wwvs => 'WWV enabled for $_[0]',
+ wwvu => 'WWV disabled $_[0]',
+ wxs => 'WX enabled for $_[0]',
+ wxu => 'WX disabled for $_[0]',
+ },
+ nl => {
+ addr => 'Addres gezet op: $_[0]',
+ already => '$_[0] reeds geconnect',
+ anns => 'Announce berichten AAN gezet voor $_[0]',
+ annu => 'Announce berichten UIT gezet voor $_[0]',
+ bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
+ bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
+ beepoff => 'De beep staat nu UIT',
+ beepon => 'De beep staat nu AAN',
+ conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
+ concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
+ conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
+ confail => 'Verbinding met $_[0] mislukt ($_[1])',
+ constart => 'Verbinding met $_[0] gestart',
+ disc1 => 'Gedisconnect door $_[0]',
+ disc2 => '$_[0] gedisconnect',
+ dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
+ dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
+ dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
+ dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
+ e1 => 'Ongeldige opdracht',
+ e2 => 'Fout: $_[0]',
+ e3 => '$_[0]: $_[1] niet gevonden',
+ e4 => 'Minimaal een prefix of een call nodig',
+ e5 => 'Niet toegestaan',
+ e6 => '*** Geen station gespecifiseerd ***',
+ e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
+ e8 => 'Ik heb een call en tekst nodig',
+ e9 => 'Ik heb wel tekst nodig voor een announce!',
+ e10 => '$_[0] is niet lokaal verbonden',
+ e12 => 'Ik heb een node call nodig',
+ e13 => '$_[0] is geen node',
+ emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
+ emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
+ email => 'E-mail addres gezet op: $_[0]',
+ helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
+ helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
+ heres => 'Aanwezigheid AAN gezet voor $_[0]',
+ heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
+ hereu => 'Aanwezigheid UIT gezet voor $_[0]',
+ homebbs => 'Uw Home mailbox is nu $_[0]',
+ homenode => 'Uw (Home) DX-Cluster is : $_[0]',
+ hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
+ hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
+ iso => '$_[0] is geisoleerd (Isolated)',
+ isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
+ isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
+ l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
+ l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
+ lang => 'De taal zijn nu Nederlandse',
+ lh1 => '$main::data/hop_table.pl bestaat niet',
+ loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
+ loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
+ loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
+ lockout => '$_[0] heeft geen toegang meer (Locked out)',
+ lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
+ m2 => '$_[0] Informatie: $_[1]',
+ merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
+ msgnew => 'Er is nieuwe post gearriveerd voor u',
+ namee1 => 'Geef aub uw naam met, set/name <uw naam>',
+ namee2 => 'Gebruiker $_[0] niet te vinden!',
+ name => 'Uw naam is gezet op \"$_[0]\"',
+ node => '$_[0] gezet als een AK1A stijl DX-cluster',
+ nodeu => '$_[0] teruggezet naar gebruiker status',
+ nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
+ nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
+ ok => 'Opdracht succesvol uitgevoerd',
+ page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
+ pagelth => 'Paginalengte gezet op ($_[0]) regels',
+ passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
+ password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
+ pingo => 'Ping gestart naar $_[0]',
+ pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
+ priv => 'Privilege level gewijzigd op $_[0]',
+ prx => '$main::mycall >',
+ qll => 'Geef uw locator met set/location of set/qra',
+ qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
+ qth => 'Uw QTH is nu \"$_[0]\"',
+ qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
+ qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
+ qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
+ qra => 'Uw QRA Locator is nu \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
+ read1 => 'Sorry, geen berichten voor u',
+ read2 => 'Bericht $_[0] niet gevonden',
+ read3 => 'Bericht $_[0] niet beschikbaar',
+ shutting => '$main::mycall gaat QRT...',
+ sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ talks => 'Talk berichten AAN gezet voor $_[0]',
+ talku => 'Talk berichten UIT gezet voor $_[0]',
+ usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
+ wwvs => 'WWV berichten AAN gezet voor $_[0]',
+ wwvu => 'WWV berichten UIT gezet voor $_[0]',
+ wxs => 'WX berichten AAN gezet voor $_[0]',
+ wxu => 'WX berichten UIT gezet voor $_[0]',
+ },
+ fr => {
+ },
+ es => {
+ addr => 'La dirección es ahora: $_[0]',
+ already => '$_[0] ya está conectado',
+ anns => 'Activada la recepción de anuncios para $_[0]',
+ annu => 'Desactivada la recepción de anuncios para $_[0]',
+ annts => 'Modo AnnTalk activado para $_[0]',
+ anntu => 'Modo AnnTalk desactivado para $_[0]',
+ badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
+ badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
+ badnode3 => 'Lista de nodos rechazados:',
+ bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
+ bbs => 'Tu BBS es ahora \"$_[0]\"',
+ beepoff => 'Avisos sonoros desactivados',
+ beepon => 'Avisos sonoros activados',
+ call1 => 'Se encontró el indicativo vÃa $_[0]:',
+ conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
+ concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
+ conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
+ confail => 'La conexión con $_[0] ha fallado ($_[1])',
+ constart => 'Se inicia la conexión a $_[0]',
+ deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
+ db1 => 'Esta base de datos está en $_[0]',
+ db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
+ db3 => 'Lo siento, la base de datos $_[0] no existe aquÃ',
+ db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
+ db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
+ db6 => 'La base de datos $_[0] ya existe, bórrala primero',
+ db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
+ db8 => 'Base de datos $_[0] creada localmente',
+ db9 => 'La base de datos $_[0] ha sido eliminada',
+ db10 => '$_[0] registros importados para la base de datos $_[1]',
+ db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
+ dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
+ dir1 => 'No hay mensajes nuevos',
+ disc1 => 'Desconectado por $_[0]',
+ disc2 => 'Canal $_[0] desconectado',
+ disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
+ disc4 => 'No existÃa el canal o la conexión, $_[0] se elimina',
+ done => 'Hecho',
+ dup => 'Lo siento, esto es un duplicado',
+ dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
+ dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
+ dx3 => 'El indicativo o la frecuencia es incorrecta',
+ dxs => 'Activada la recepción de spots de DX para $_[0]',
+ dxu => 'Desactivada la recepción de spots de DX para $_[0]',
+ e1 => 'Este comando no es válido',
+ e2 => 'Error: $_[0]',
+ e3 => '$_[0]: $_[1] no encontrado',
+ e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
+ e5 => 'No estás autorizado',
+ e6 => '*** No se ha especificado una estación ***',
+ e7 => 'El indicativo $_[0] no es visible en el cluster',
+ e8 => 'Se necesita un indicativo y algún texto',
+ e9 => 'Se necesita al menos algún texto',
+ e10 => '$_[0] no se encuentra conectado',
+ e11 => 'No puedes usar tu propio $main:mycall como destino',
+ e12 => 'Se necesita el indicativo del nodo',
+ e13 => '$_[0] no es un nodo',
+ e14 => 'El primer argumento debe de ser numérico y > 0',
+ e15 => 'calificador no válido \"$_[0]\"',
+ e16 => 'El fichero \"$_[0]\" ya existe',
+ e17 => 'Por favor no uses la palabra: @_ aquÃ',
+ e18 => 'No se puede conectar con $_[0] ($!)',
+ e19 => 'Carácter no válido en la lÃnea',
+ e20 => 'SÃmbolo $_[0] no reconocido',
+ e21 => '$_[0] no es numérico',
+ e22 => '$_[0] no es un indicativo',
+ e23 => '$_[0] fuera de rango (ej: 0/30000)',
+ e24 => 'Lo siento, el acceso a internet no está habilitado',
+ e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
+ e26 => 'Demasiados errores, serás desconectado',
+ e27 => '$_[0] no es un numero o un prefijo',
+ e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
+ e29 => 'Necesitas password',
+ e30 => 'No se puede abrir $_[0] $!',
+ e31 => '$_[0] no es un usuario',
+ e32 => 'Se necesita una frase de contraseña',
+
+ echoon => 'Eco local activado',
+ echooff => 'Eco local desactivado',
+ echow => '*Eco local desactivado, set/echo para activarlo',
+ emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
+ emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
+ email => 'La dirección E-mail es ahora: $_[0]',
+ export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
+ export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
+ export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
+ filter1 => 'Filtro $_[0] actualizado para $_[1]',
+ filter2 => 'Es necesario un valor para $_[0]',
+ filter3 => 'No hay filtros definidos para $_[0]',
+ filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
+ filter5 => 'Se necesitan algunos comandos para el filtro...',
+ filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
+ grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
+ gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
+ illcall => 'Lo siento, $_[0] no es un indicativo válido',
+ hasha => '$_[0] ya existe en $_[1]',
+ hashb => '$_[0] añadido a $_[1]',
+ hashc => '$_[0] eliminado desde $_[1]',
+ hashd => '$_[0] no en $_[1]',
+ hashe => '$_[0] activado $_[1]',
+ helpe1 => 'La ayuda no está disponible, comunÃcaselo al sysop',
+ helpe2 => 'No hay ayuda disponible para $_[0]',
+ heres => 'Se informa a la red: $_[0] está presente',
+ heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
+ hereu => 'Se informa a la red: $_[0] está ausente',
+ homebbs => 'Tu BBS es ahora: $_[0]',
+ homenode => 'Tu cluster habitual es ahora: $_[0]',
+ hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
+ hnodee2 => 'Error al definir homenode en $_[0]',
+ hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
+ init1 => 'Enviado mensaje de inicialización a $_[0]',
+ iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
+ isou => 'El cluster $_[0] se pone en modo activo',
+ isoc => '$_[0] creado y definido como pasivo (Aislado)',
+ isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
+ isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
+ isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
+ l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
+ l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
+ lang => 'El idioma es ahora Español',
+ lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
+ lange2 => 'Error al seleccionar idioma en $_[0]',
+ lh1 => '$main::data/hop_table.pl no existe',
+ loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
+ loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
+ loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
+ loc => 'Tu Lat/Long es ahora \"$_[0]\"',
+ lockout => '$_[0] Excluido del sistema',
+ lockoutc => '$_[0] Creado y excluido del sistema',
+ lockoutun => '$_[0] autorizado para conectar',
+ lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
+ loginu => '$_[0] conecta',
+ logoutu => '$_[0] se desconecta',
+ loginn => '$_[0] conecta',
+ logoutn => '$_[0] se desconecta',
+ m1 => 'Introduce el tÃtulo (máx. 30 caractéres):',
+
+ m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
+ m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
+ m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
+ m5 => 'Lo siento, se necesita un número de mensaje',
+ m6 => 'Reenviado a: $_[0]',
+ m7 => 'TÃtulo : $_[0]',
+ m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
+ m9 => 'Hay correo nuevo para ti. Bórralo una vez leÃdo.',
+ m10 => 'mensaje interrumpido',
+ m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
+ m12 => 'mensaje nr $_[0] borrado',
+ m13 => 'mensaje nr $_[0] no encontrado',
+ m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
+ m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
+ m16 => 'Se necesita un número de mensaje',
+ m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
+ msg1 => 'Cola de mensajes tipo BoletÃn',
+ msg2 => 'Cola de mensajes tipo Privados',
+ msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
+ msgu => 'uso: msg <cmd> <msgno> data...',
+ merge1 => 'Petición de envÃo de $_[1] spots y $_[2] WWV enviada a $_[0]',
+ moon => 'QTH dd/mm/yyyy Salida Puesta',
+ moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
+ mond => 'Activado modo monitor',
+ mone => 'Desactivado modo monitor',
+ namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
+ namee2 => 'No se encuentra el usuario $_[0]!',
+ name => 'Tu nombre es \"$_[0]\"',
+ nodea => '$_[0] definido como nodo AK1A ',
+ nodeac => '$_[0] creado como nodo AK1A ',
+ nodeb => '$_[0] definido como BBS',
+ nodebc => '$_[0] creado como BBS',
+ nodec => '$_[0] definido como nodo CLX ',
+ nodecc => '$_[0] creado como nodo CLX ',
+ noder => '$_[0] definido como nodo AR-Cluster ',
+ noderc => '$_[0] creado como nodo AR-Cluster ',
+ nodes => '$_[0] definido como nodo DXSpider ',
+ nodesc => '$_[0] creado como nodo DXSpider ',
+ nodex => '$_[0] definido como nodo DXNET ',
+ nodexc => '$_[0] creado como nodo DXNET ',
+ nodeu => '$_[0] es ahora un usuario',
+ nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
+ notdone => 'No se pudo hacer',
+ nothere => 'Lo siento, pero $_[0] no está aquà ahora, inténtalo mas tarde',
+ obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
+ ok => 'Operación realizada',
+ outconn => 'Iniciando conexión con $_[0]',
+ page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] lÃneas) >',
+ pagelth => 'La longitud de las páginas es ahora $_[0]',
+ passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
+ passphrase => 'Passphrase definida o cambiada para $_[0]',
+ passphraseu => 'Passphrase borrada para $_[0]',
+
+ password => 'El Password ha sido definido o cambiado para $_[0]',
+ passwordu => 'Contraseña borrada para $_[0]',
+ pc90s => 'PC90 activado para $_[0]',
+ pc90u => 'PC90 desactivado para $_[0]',
+ pingo => 'Iniciado el ping a $_[0]',
+ pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
+ pinge1 => 'No puedes enviarte un ping a ti mismo!',
+ pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
+ 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
+ pru => 'El Prompt vuelve a ser el normal por defecto',
+ priv => 'Nivel de privilegios modificado para $_[0]',
+ prx => '$main::mycall >',
+ pw0 => 'Escribe el password antiguo: ',
+ pw1 => 'Escribe el nuevo password: ',
+ pw2 => 'Confirma el nuevo password: ',
+ pw3 => 'El Password ha sido cambiado',
+ pw4 => 'Los passwords no coinciden, NO se han cambiado',
+ qll => 'Por favor introduce tu locator con set/location o set/qra',
+ qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
+ qth => 'Tu QTH es ahora \"$_[0]\"',
+ qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
+ qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
+ qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
+ qra => 'Tu QRA Locator es ahora \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
+ read1 => 'Lo siento, no hay mensajes nuevos para ti',
+ read2 => 'Mensaje $_[0] no encontrado',
+ read3 => 'Mensaje $_[0] no disponible',
+ rec => '$_[0] registros',
+ reg => '$_[0] registrado',
+ regc => '$_[0] creado y registrado',
+ reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
+ regun => 'El usuario $_[0] no esta registrado',
+ route => '$_[0] en $_[1] vÃa $_[2]',
+ sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
+ sat4 => 'Satélites disponibles:',
+ sat5 => 'Es necesario el tÃtulo nnnn.AMSAT para actualizar datos keps. desde un mensaje',
+ satnf => 'Satélite $_[0] desconocido',
+ satdisc => '-----',
+ sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
+ sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
+ sethop3 => 'No hay hops definidos para $_[0]',
+ shu => '\"SHU\" No es suficiente! Es necesario como mÃnimo escribir \"SHUT\" para apagar el cluster',
+ shutting => '$main::mycall shutting down...',
+ sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
+ snode1 => 'Nodo Call Sort Versión',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Indicativo desconocido',
+ sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
+ sorry => 'Lo siento',
+ spf1 => 'spoof: creando nuevo usuario $_[0]',
+ stathf => 'EstadÃsticas de spots en HF de los últimos 31 dÃas',
+ stathft => 'EstadÃsticas de spots en HF de los últimos 31 dÃas para DXCC $_[0]',
+ statvhf => 'VHF + DX Spot Stats, últimos 31 dÃas',
+ statvhft => 'VHF + DX Spot Stats, últimos 31 dÃas para DXCC $_[0]',
+ statdx => 'Total de Spots de DX en los últimos 31 dÃas',
+ sun => 'QTH dd/mm/yyyy Salida Puesta',
+ sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
+ susdb1 => 'uso: indicativo estado ciudad',
+ susdb2 => 'USDB $_[0] era $_[1], $_[2]',
+ susdb3 => 'USDB $_[0] es ahora $_[1], $_[2]',
+ susdb4 => 'USDB $_[0] borrado',
+ suser1 => 'uso: indicativo user_field_name valor',
+ suser2 => 'Usuario $_[0] no encontrado',
+ suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
+ suser4 => 'User field name \'$_[0]\' no existe',
+ time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Recepción de mensajes Talk activado para $_[0]',
+ talku => 'Recepción de mensajes Talk desactivado para $_[0]',
+ talkend => 'Finalizado modo talk contigo',
+ talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
+ talknh => 'Lo siento $_[0] no está conectado en este momento',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Iniciando modo talk contigo',
+ unset => '$_[0] deshabilitado para $_[1]',
+ unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
+ unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
+ usernf => '*** Registro de usuario $_[0] no encontrado ***',
+ wcy1 => '$_[0] falta o esta fuera de rango',
+ wcy2 => 'WCY Duplicado',
+ wcys => 'Activada recepción de anuncios WCY para $_[0]',
+ wcyu => 'Desactivada recepción de anuncios WWV para $_[0]',
+ wwv1 => '$_[0] falta o esta fuera de rango',
+ wwv2 => 'WWV Duplicado',
+ wwvs => 'Activada recepción de anuncios WWV para $_[0]',
+ wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
+ wxs => 'Activada recepción de anuncios WX para $_[0]',
+ wxu => 'Desactivada recepción de anuncios WX para $_[0]',
+ },
+ de => {
+ addr => 'Adresse gesetzt auf: $_[0]',
+ already => '$_[0] bereits connnected',
+ anns => 'Announce flag gesetzt auf $_[0]',
+ annu => 'Announce flag zurueckgesetzt auf $_[0]',
+ annts => 'AnnTalk flag gesetzt auf $_[0]',
+ anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
+ badnode1 => '$_[0] ist nun ein bad node',
+ badnode2 => '$_[0] ist nun ein good node',
+ badnode3 => 'Liste der Bad Nodes:-',
+ bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
+ bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
+ beepoff => 'Beeps sind nun aus',
+ beepon => 'Beeps sind nun eingeschaltet',
+ call1 => 'Callsign lookup via $_[0]:',
+ conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
+ concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
+ conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
+ confail => 'Verbindung zu $_[0] misslungen ($_[1])',
+ constart => 'Verbindung zu $_[0] gestartet',
+ deluser => 'User $_[0] wurde geloescht',
+ db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
+ db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
+ db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
+ db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
+ db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
+ db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
+ db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
+ db8 => 'Datenbank $_[0] lokal angelegt',
+ db9 => 'Datenbank $_[0] entfernt',
+ db10 => '$_[0] Datensaetze importiert in $_[1]',
+ db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
+ dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
+ dir1 => 'Keine Nachricht gefunden',
+ disc1 => 'Disconnected von $_[0]',
+ disc2 => 'Kanal $_[0] disconnected',
+ disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
+ disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
+ done => 'Done',
+ dup => 'Sorry, dies ist ein Duplikat',
+ dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
+ dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
+ dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
+ dxs => 'DX Spots flag gesetzt auf $_[0]',
+ dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
+ e1 => 'Ungueltiger Befehl',
+ e2 => 'Fehler: $_[0]',
+ e3 => '$_[0]: $_[1] nicht gefunden',
+ e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
+ e5 => 'Nicht erlaubt',
+ e6 => '*** Keine Station angegeben ***',
+ e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
+ e8 => 'Brauche ein Rufzeichen und etwas Text',
+ e9 => 'Brauche wenigstens etwas Text',
+ e10 => '$_[0] nicht lokal connected',
+ e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
+ e12 => 'Brauche ein Node Rufzeichen',
+ e13 => '$_[0] ist kein Node',
+ e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
+ e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
+ e16 => 'Datei \"$_[0]\" existiert',
+ e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
+ e18 => 'Kann nicht verbinden mit $_[0] ($!)',
+ e19 => 'Ungueltiger Character in der Zeile',
+ e20 => 'Kuerzel $_[0] nicht erkannt',
+ e21 => '$_[0] nicht numerisch',
+ e22 => '$_[0] kein Rufzeichen',
+ e23 => '$_[0] kein Bereich (z.B. 0/30000)',
+ e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
+
+ e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
+ e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
+ e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
+ e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
+ e29 => 'Brauche eine Passwort',
+ echoon => 'Echo enabled',
+ echooff => 'Echo disabled',
+ echow => '*Echo ist im moment disabled, set/echo to enable',
+ emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
+ emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
+ email => 'E-mail Adresse gesetzt auf: $_[0]',
+ export1 => 'Gebrauch: export <msgno> <dateiname>',
+ export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
+ export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
+ filter1 => 'Filter $_[0] upgedated fuer $_[1]',
+ filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
+ filter3 => 'Keine Filter definiert fuer $_[0]',
+ filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
+ filter5 => 'brauche ein paar Filter Kommandos...',
+ filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
+ grids => 'DX Grid flag gesetzt auf $_[0]',
+ gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
+ illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
+ hasha => '$_[0] existiert bereits in $_[1]',
+ hashb => '$_[0] zugefuegt zu $_[1]',
+ hashc => '$_[0] entfernt von $_[1]',
+ hashd => '$_[0] nicht in $_[1]',
+ hashe => '$_[0] gesetzt auf $_[1]',
+ helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
+ helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
+ heres => 'Hier gesetzt auf $_[0]',
+ heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
+ hereu => 'Here zurueckgesetzt auf $_[0]',
+ homebbs => 'Heimat BBS gesetzt auf: $_[0]',
+ homenode => 'Heimat Node gesetzt auf: $_[0]',
+ hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
+ hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
+ hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
+ init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
+ iso => '$_[0] Isoliert',
+ isou => '$_[0] UnIsoliert',
+ isoc => '$_[0] erstellt und Isoliert',
+ isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
+ isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
+ isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
+ l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
+ l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
+ lang => 'Sprache ist jetzt Deutch',
+ lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
+ lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
+ lh1 => '$main::data/hop_table.pl existiert nicht',
+ loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
+ loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
+ loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
+ loc => 'Dein Lat/Long ist nun \"$_[0]\"',
+ lockout => '$_[0] ausgesperrt',
+ lockoutc => '$_[0] erstellt und ausgesperrt',
+ lockoutun => '$_[0] Aussperrung aufgehoben',
+ lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
+ loginu => 'User $_[0] hat eingeloggt',
+ logoutu => 'User $_[0] hat ausgeloggt',
+ loginn => 'Node $_[0] hat eingeloggt',
+ logoutn => 'Node $_[0] hat ausgeloggt',
+ m1 => 'Subjekt eingeben (30 Zeichen):',
+ m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
+ m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
+ m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
+ m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
+ m6 => 'Reply to: $_[0]',
+ m7 => 'Subject : $_[0]',
+ m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
+ m9 => 'Neue Nachricht(en) fuer Dich',
+ m10 => 'Nachricht abgebrochen',
+ m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
+ m12 => 'Nachricht Nr. $_[0] geloescht',
+ m13 => 'Nachricht Nr. $_[0] fehlt',
+ m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
+ m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
+ m16 => 'Brauche eine Nachrichten Nummer',
+ m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
+ msg1 => 'Bulletin Nachrichten aufgeschoben',
+ msg2 => 'Private Nachrichten aufgeschoben',
+ msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
+ msgu => 'Gebrauch: msg <cmd> <msgno> data...',
+ merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
+ moon => 'Standort dd/mm/yyyy Rise Set',
+ moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
+ mond => 'Ueberwachung Disabled',
+ mone => 'Ueberwachung Enabled',
+ namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
+ namee2 => 'Kann User $_[0]nicht finden!',
+ name => 'Dein Name ist jetzt \"$_[0]\"',
+ nodea => '$_[0] gesetzt als AK1A style Node',
+ nodeac => '$_[0] erstellt als AK1A style Node',
+ nodeb => '$_[0] gesetzt als BBS',
+ nodebc => '$_[0] erstellt als BBS',
+ nodec => '$_[0] gesetzt als CLX style Node',
+ nodecc => '$_[0] erstellt als CLX style Node',
+ noder => '$_[0] gesetzt als AR-Cluster style Node',
+ noderc => '$_[0] erstellt als AR-Cluster style Node',
+ nodes => '$_[0] gesetzt als DXSpider style Node',
+ nodesc => '$_[0] erstellt als DXSpider style Node',
+ nodex => '$_[0] gesetzt als DXNET style Node',
+ nodexc => '$_[0] erstellt als DXNET style Node',
+ nodeu => '$_[0] zurueckgesetzt als ein User',
+ nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
+ notdone => 'Nicht ausgefuehrt',
+ nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
+ obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
+ ok => 'Operation erfolgreich',
+ outconn => 'Outstanding connect to $_[0]',
+ page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
+ pagelth => 'Seitenlaenge ist nun $_[0]',
+ passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
+ password => 'Passwort gesetzt oder geaendert fuer $_[0]',
+ passwordu => 'Passwort geloescht fuer $_[0]',
+ pingo => 'Ping Started to $_[0]',
+ pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
+ pinge1 => 'Cannot ping yourself!',
+ pingint => 'Ping interval on $_[0] set to $_[1] secs',
+ 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ priv => 'Priviligierten Level geaendert auf $_[0]',
+ prx => '$main::mycall >',
+ pw0 => 'Altes Passwort eingeben: ',
+ pw1 => 'Neues Passwort eingeben: ',
+ pw2 => 'Wiederhole neues Passwort: ',
+ pw3 => 'Passwort geaendert',
+ pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
+ qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
+ qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
+ qth => 'Dein QTH ist nun \"$_[0]\"',
+ qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
+ qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
+ qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
+ qra => 'Dein QRA Locator ist nun \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
+ read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
+ read2 => 'Msg $_[0] nicht gefunden',
+ read3 => 'Msg $_[0] nicht verfuegbar',
+ rec => '$_[0] records',
+ reg => '$_[0] registriert',
+ regc => '$_[0] erstellt und registriert',
+ reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
+ regun => '$_[0] unregistriert',
+ route => '$_[0] auf $_[1] via $_[2]',
+ sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
+ sat4 => 'Satelliten verfuegbar:-',
+ satnf => 'Satellit $_[0] unbekannt',
+ satdisc => '-----',
+ sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
+ sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
+ sethop3 => 'Keine hops gesetzt fuer $_[0]',
+ shutting => '$main::mycall shutting down...',
+ sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
+ snode1 => 'Node Call Sort Version',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Unbekanntes Rufzeichen',
+ sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
+ sorry => 'Sorry',
+ spf1 => 'spoof: erzeuge neuen User $_[0]',
+ stathf => 'HF DX Spot Stats, letzte 31 Tage',
+ stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
+ statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
+ statdx => 'Total DX Spots letzte 31 Tage',
+ sun => 'Location dd/mm/yyyy Rise Set',
+ sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
+ suser1 => 'Gebrauch: Rufzeichen user_field_name value',
+ suser2 => 'User $_[0] nicht gefunden',
+ suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
+ suser4 => 'User Feld name \'$_[0]\' existiert nicht',
+ time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Talk flag gesetzt auf $_[0]',
+ talku => 'Talk flag zurueckgesetzt auf $_[0]',
+ talkend => 'Beendet Talk zu Dir',
+ talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
+ talknh => 'Sorry $_[0] ist im moment nicht online',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Startet Talkmode zu Dir',
+ usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
+ wwvs => 'WWV flag gesetzt auf $_[0]',
+ wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
+ wxs => 'WX flag gesetzt auf $_[0]',
+ wxu => 'WX flag zurueckgesetzt auf $_[0]',
+ },
+ it => {
+ addr => 'Indirizzo impostato a: $_[0]',
+ already => '$_[0] e\' connesso',
+ anns => 'Annunci attivati alle_[0]',
+ annu => 'Annunci disattivati alle $_[0]',
+ annts => 'Talk attivato alle $_[0]',
+ anntu => 'Talk disattivato alle $_[0]',
+ badnode1 => '$_[0] e\' un nodo disabilitato',
+ badnode2 => '$_[0] e\' un nodo attivo',
+ badnode3 => 'Lista dei nodi disabilitati:-',
+ bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
+ bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
+ beepoff => 'I beep sono disattivati',
+ beepon => 'I beep sono attivati',
+ call1 => 'Ricerca del nominativo via $_[0]:',
+ conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
+ concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
+ conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
+ confail => 'connessione a $_[0] fallita ($_[1])',
+ constart => 'connessione a $_[0] iniziata',
+ deluser => 'L\'utente $_[0] e\' stato eliminato',
+ db1 => 'Questo database e\' presso $_[0]',
+ db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
+ db3 => 'Spiacente, il database $_[0] non esiste qui',
+ db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
+ db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
+ db6 => 'Il database $_[0] esiste già , cancellalo prima',
+ db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
+ db8 => 'Il database $_[0] e\' stato creato localmente',
+ db9 => 'Il database $_[0] e\' stato eliminato',
+ db10 => '$_[0] record importati in $_[1]',
+ db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
+ dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
+ dir1 => 'Nessun messaggio trovato',
+ disc1 => 'Disconnesso da $_[0]',
+ disc2 => 'Canalew $_[0] disconnesso',
+ disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
+ disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
+ done => 'Fatto',
+ dup => 'Spiacente, questo e\' un doppione',
+ dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
+ dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
+ dx3 => 'Il nominativo o la frequenza sono errati',
+ dxs => 'DX Spots attivati alle $_[0]',
+ dxu => 'DX Spots disattivati alle $_[0]',
+ e1 => 'Comando errato',
+ e2 => 'Errore: $_[0]',
+ e3 => '$_[0]: $_[1] non trovato',
+ e4 => 'Inserire un prefisso o un nominativo',
+ e5 => 'Non permesso',
+ e6 => '*** Nessuna stazione specificata ***',
+ e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
+ e8 => 'Inserire un nominativo o del testo',
+ e9 => 'Inserire del testo',
+ e10 => '$_[0] non connesso localmente',
+ e11 => 'Impossibile usare $main:mycall come destinazione',
+ e12 => 'Inserire il nominativo di un nodo',
+ e13 => '$_[0] non e\' un nodo',
+ e14 => 'Il primo argomento deve essere numerico e > 0',
+ e15 => 'qualificatore non valido \"$_[0]\"',
+ e16 => 'Il file \"$_[0]\" esiste',
+ e17 => 'Non usare le parole: @_ qui',
+ e18 => 'Impossibile connettere $_[0] ($!)',
+ e19 => 'Carattere non valido nella linea',
+ e20 => 'separatore $_[0] non riconosciuto',
+ e21 => '$_[0] non e\' numerico',
+ e22 => '$_[0] non e\' un nominativo',
+ e23 => '$_[0] non e\' un intervallo (es 0/30000)',
+ e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
+ e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
+ e26 => 'Troppi errori, stai per essere disconnesso',
+ e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
+ e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
+ e29 => 'E\' necessaria una password',
+
+ echoon => 'Echo abilitato',
+ echooff => 'Echo disabilitato',
+ echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
+ emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
+ emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
+ email => 'Indirizzo email impostato a: $_[0]',
+ export1 => 'sintassi: export <num_mess> <nome_file>',
+ export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
+ export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
+ filter1 => 'Filtro $_[0] aggiornato per $_[1]',
+ filter2 => 'Chiave sconosciuta per il filtro $_[0]',
+ filter3 => 'Nessun filtro definito per $_[0]',
+ filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
+ filter5 => 'necessito qualche comando per i filtri...',
+ filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
+ grids => 'DX Grid attivato alle $_[0]',
+ gridu => 'DX Grid disattivato alle $_[0]',
+ illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
+ hasha => '$_[0] già esiste $_[1]',
+ hashb => '$_[0] aggiunto a $_[1]',
+ hashc => '$_[0] rimosso da $_[1]',
+ hashd => '$_[0] non in $_[1]',
+ hashe => '$_[0] impostato a $_[1]',
+ helpe1 => 'Aiuto non disponibile, contatta il sysop',
+ helpe2 => 'Nessun aiuto per $_[0]',
+ heres => 'Here abilitato per $_[0]',
+ heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
+ hereu => 'Here disattivato per $_[0]',
+ homebbs => 'Home BBS impostata a: $_[0]',
+ homenode => 'Home Node impostato a: $_[0]',
+ hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
+ hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
+ hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
+ init1 => 'inizializzaione inviata a $_[0]',
+ iso => '$_[0] Isolato',
+ isou => '$_[0] non Isolato',
+ isoc => '$_[0] creato ed isolato',
+ isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
+ isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
+ isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
+ l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
+ l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
+ lang => 'La lingua selezionata e\' adesso Italiano',
+ lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
+ lange2 => 'impostazione lingua fallita per $_[0]',
+ lh1 => '$main::data/hop_table.pl non esiste',
+ loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
+ loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
+ loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
+ loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
+ lockout => '$_[0] Bloccato',
+ lockoutc => '$_[0] Creato e bloccato',
+ lockoutun => '$_[0] Sbloccato',
+ lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
+ loginu => 'L\'utente $_[0] e\' entrato nel cluster',
+ logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
+ loginn => 'Il nodo $_[0] si e\' connesso',
+ logoutn => 'Il nodo $_[0] si e\' disconnesso',
+ m1 => 'Inserisci il Soggetto (30 caratteri):',
+ m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
+ m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
+ m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
+ m5 => 'Spiacente, ho bisogno del numero di un messaggio',
+ m6 => 'Rispondi a: $_[0]',
+ m7 => 'Soggetto : $_[0]',
+ m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
+ m9 => 'Nuovi messaggi sono arrivati per te',
+ m10 => 'Messaggio abortito',
+ m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
+ m12 => 'Il messaggio $_[0] e\' stato cancellato',
+ m13 => 'Il messaggio $_[0] non esiste',
+ m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
+ m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
+ m16 => 'Specificare il numero del messaggio',
+ m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
+ msg1 => 'Bollettino messo in coda',
+ msg2 => 'Messaggio messo in coda',
+ msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
+ msgu => 'sintassi: msg <comando> <num_mess> dati...',
+ merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
+ moon => 'Localita gg/mm/aaaa Alba Tramonto',
+ moon_with_azel => 'LocalitÃ
+ gg/mm/aaaa Alba Tramonto Azim Elev',
+ mond => 'Monitor disabilitato',
+ mone => 'Monitor abilitato',
+ namee1 => 'Per favore inserisci con set/name <nome>',
+ namee2 => 'Impossibile trovare l\'utente $_[0]!',
+ name => 'Il tuo nome ora e\' \"$_[0]\"',
+ nodea => '$_[0] impostato come nodo stile AK1A',
+ nodeac => '$_[0] creato come nodo stile AK1A',
+ nodeb => '$_[0] impostato come BBS',
+ nodebc => '$_[0] creato come BBS',
+ nodec => '$_[0] impostato come nodo stile CLX',
+ nodecc => '$_[0] creato come nodo stile CLX',
+ noder => '$_[0] impostato come nodo stile AR-Cluster',
+ noderc => '$_[0] creato come nodo stile AR-Cluster',
+ nodes => '$_[0] impostato come nodo stile DXSpider',
+ nodesc => '$_[0] creato come nodo stile DXSpider',
+ nodex => '$_[0] impostato come nodo stile DXNET',
+ nodexc => '$_[0] creato come nodo stile DXNET',
+ nodeu => '$_[0] impostato come utente',
+ nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
+ notdone => 'Non eseguito',
+ nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
+ obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
+ ok => 'Operazione eseguita con successo',
+ outconn => 'Connessione in corso per $_[0]',
+ page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
+ pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
+ passerr => 'sintassi: SET/PASS <password> <nominativo>',
+ password => 'Password impostata o cambiata per $_[0]',
+ passwordu => 'Password rimossa per $_[0]',
+ pingo => 'Ping mandato a $_[0]',
+ pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
+ pinge1 => 'Non puoi far un ping su te stesso!',
+ pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
+ 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ priv => 'Privilegi cambiati per $_[0]',
+ prs => 'Prompt impostato a \"$_[0]\"',
+ pru => 'Prompt reimpostato al predefinito',
+ prx => '$main::mycall >',
+ pw0 => 'Inserisci la vecchia password: ',
+ pw1 => 'Inserisci la nuova password: ',
+ pw2 => 'Reinserisci la nuova password: ',
+ pw3 => 'Password modificata',
+ pw4 => 'Le password sono differenti, password NON cambiata',
+ qll => 'Per favore inserisci la tua località con set/location o set/qra',
+ qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
+ qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
+ qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
+ qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
+ qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
+ qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
+ rec => '$_[0] records',
+ read1 => 'Spiacente, non ci sono nuovi messaggi per te',
+ read2 => 'Messaggio $_[0] non trovato',
+ read3 => 'Messaggio $_[0] non disponibile',
+ rec => '$_[0] records',
+ reg => '$_[0] registrato',
+ regc => '$_[0] creato e registrato',
+ reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
+ regun => '$_[0] deregistrato',
+ route => '$_[0] su $_[1] via $_[2]',
+ sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
+ sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
+ sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
+ satnf => 'Satellite $_[0] sconosciuto',
+ satdisc => '-----',
+ sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
+ sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
+ sethop3 => 'Nessun salto impostato per $_[0]',
+ shutting => '$main::mycall si sta arrestando...',
+ sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
+ snode1 => 'Nodo Nominativo Ordine Versione',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Nominativo sconosciuto',
+ sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
+ sorry => 'Spiacente',
+ spf1 => 'spoof: sto creando il nuovo utente $_[0]',
+ stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
+ stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
+ statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
+ statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
+ statdx => 'Totale DX Spots degli ultimi 31 giorni',
+ sun => 'Località gg/mm/aaaa Alba Tramonto',
+ sun_with_azel => 'LocalitÃ
+ gg/mm/aaaa Alba Tramonto Azim Elev',
+
+ suser1 => 'sintassi: nominatio campo_utente valore',
+ suser2 => 'Utente $_[0] non trovato',
+ suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
+ suser4 => 'Il campo utente \'$_[0]\' non esiste',
+ time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Talk abilitato per $_[0]',
+ talku => 'Talk disabilitato per $_[0]',
+ talkend => 'Chiude il la conversazione con te',
+ talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
+ talknh => 'Spiaente $_[0] non e\' collegato al momento',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Inizia una conversazione con te',
+ unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
+ unsethop2 => 'salti eliminati su $_[1] per $_[0]',
+ usernf => '*** Record utente per $_[0] non trovato ***',
+ wcy1 => '$_[0] manca o e\' fuori limite',
+ wcy2 => 'WCY duplicato',
+ wwv1 => '$_[0] manca o e\' fuori limite',
+ wwv2 => 'WWV duplicato',
+ wwvs => 'WWV abilitati per $_[0]',
+ wwvu => 'WWV disabilitati per $_[0]',
+ wxs => 'WX abilitati per $_[0]',
+ wxu => 'WX disabilitati per $_[0]',
},
+
+ cz => {
+ addr => 'Adresa nastavena na: $_[0]',
+ already => '$_[0] je uz pripojen',
+ anns => 'Ann je povolen pro $_[0]',
+ annu => 'Ann je zakazan pro $_[0]',
+ annts => 'AnnTalk je povolen pro $_[0]',
+ anntu => 'AnnTalk je zakazan pro $_[0]',
+ badnode1 => '$_[0] je nyni zavadny nod',
+ badnode2 => '$_[0] je nyni bezvadny nod',
+ badnode3 => 'Seznam zavadnych nodu:-',
+ bbse1 => 'Prosim zadej svou BBS adresu, set/bbs <tva bbs adresa>',
+ bbs => 'Tva BBS adresa je nyni \"$_[0]\"',
+ beepoff => 'Zvuky jsou nyni vypnuty',
+ beepon => 'Zvuky jsou nyni zapnuty',
+ call1 => 'Vyhledani znacky pres $_[0]:',
+ conother => 'Lituji $_[0], jses na me napojen na jinem portu',
+ concluster => 'Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])',
+ conscript => 'nebyl spusten connect skript \"$_[0]\" nalezen v $main::root/connect',
+ confail => 'pripojeni na $_[0] selhalo ($_[1])',
+ constart => 'pripojeni na $_[0] bylo zahajeno',
+ deluser => 'Uzivatel $_[0] byl smazan',
+ db1 => 'Tato databaze se nachazi na $_[0]',
+ db2 => 'Lituji, ale klic $_[0] nebyl nalezen v $_[1]',
+ db3 => 'Lituji, ale databaze $_[0] se zde nenachazi',
+ db4 => 'Lituji, databaze $_[0] na $_[1] neni momentalne online',
+ db5 => 'Pripojuji vzdalenou databazi na $_[0]...cekej...',
+ db6 => 'Databaze $_[0] uz existuje, nejprve ji smaz',
+ db7 => 'Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]',
+ db8 => 'Databaze $_[0] byla vytvorena lokalne',
+ db9 => 'Databaze $_[0] byla smazana',
+ db10 => '$_[0] zaznamu bylo vlozeno do $_[1]',
+ db11 => 'Posilam tvuj pozadavek do $_[0], prosim cekej...',
+ dfreq1 => 'Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw',
+ dir1 => 'Zadne zpravy nebyly nalezeny',
+ disc1 => 'Odpojeno uzivatelem $_[0]',
+ disc2 => 'Kanal $_[0] odpojen',
+ disc3 => 'Zadny kanal, ale spojeni $_[0] zruseno',
+ disc4 => 'Zadny kanal ani spojeni, ale $_[0] byl odpojen',
+ done => 'Hotovo',
+ dup => 'Lituji, toto je duplikat',
+ dx1 => 'Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text',
+ dx2 => 'Potrebuji znacku; pouziti: DX [BY call] freq call text',
+ dx3 => 'Znacka nebo frekvence je neplatna',
+ dxs => 'DX spoty jsou povoleny pro $_[0]',
+ dxu => 'DX spoty jsou zakazany pro $_[0]',
+ e1 => 'Neplatny prikaz',
+ e2 => 'Chyba: $_[0]',
+ e3 => '$_[0]: $_[1] nebylo nalezeno',
+ e4 => 'Potrebuji alespon prefix nebo znacku',
+ e5 => 'Neni povoleno',
+ e6 => '*** Zadna stanice specifikovana ***',
+ e7 => 'znacka $_[0] neni v clusteru viditelna',
+ e8 => 'Potrebuji znacku a nejaky text',
+ e9 => 'Potrebuji alespon nejaky text',
+ e10 => 'Stanice $_[0] neni pripojena lokalne',
+ e11 => 'Nemohu pouzit $main:mycall jako cil',
+ e12 => 'Potrebuji znacku nodu',
+ e13 => '$_[0] neni nod',
+ e14 => 'Prvni argument musi byt cislo vetsi nez 0',
+ e15 => 'neplatny parametr \"$_[0]\"',
+ e16 => 'Soubor \"$_[0]\" uz existuje',
+ e17 => 'Prosim nepouzivej zde toto slovo: @_',
+ e18 => 'Nemohu se pripojit na $_[0] ($!)',
+ e19 => 'neplatny znak v radku',
+ e20 => 'retezec $_0] nebyl rozpoznan',
+ e21 => '$_[0] neni cislo',
+ e22 => '$_[0] neni znacka',
+ e23 => '$_[0] neni v rozsahu (napr 0/30000)',
+ e24 => 'Lituji, pristup na internet neni povolen',
+ e25 => 'Lituji, hodnota musi byt mezi $_[0] a $_[1]',
+ e26 => 'Prilis mnoho chyb najednou, jsi odpojovan',
+ e27 => '$_[0] neni cislo nebo prefix',
+ e28 => 'Lituji, musis byt registrovan (SP $main::myalias k registraci)',
+ e29 => 'Potrebuji heslo',
+ e30 => 'Nemohu otevrit $_[0] $!',
+ e31 => '$_[0] neni uzivatel',
+ e32 => 'Potrebuji frazi',
+ e33 => '$_[0] neni pocet dnu nebo platne datum',
+
+ echoon => 'Echo povoleno',
+ echooff => 'Echo zakazano',
+ echow => '*Echo je momentalne zakazano, pouzij set/echo k povoleni',
+ emaile1 => 'Prosim zadej svou e-mailovou adresu, set/email <tva emailova adresa>',
+ emaila => 'Tva e-mailova adresa je nyni \"$_[0]\"',
+ email => 'E-mailova adresa je nastavena na: $_[0]',
+ export1 => 'pouziti: export <cislo zpravy> <soubor>',
+ export2 => '$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])',
+ export3 => '$_[2 ] exportoval zpravu $_[0] to $_[1]',
+ filter1 => 'Filtr $_[0] byl zmenen pro for $_[1]',
+ filter2 => 'Neznamy prikaz filtru $_[0]',
+ filter3 => 'Nejsou zadne definovane filtry pro $_[0]',
+ filter4 => '$_[0]$_[1] Filtr $_[2] smazan pro $_[3]',
+ filter5 => 'potrebuji nejake prikazy filtru...',
+ filter6 => '$_[0]$_[1] Filtr pro $[2] nebyl nalezen',
+ grids => 'QRA ctverec byl povolen pro $_[0]',
+ gridu => 'QRA ctverec byl zakazan pro $_[0]',
+ illcall => 'Lituji, $_[0] neni platna znacka',
+ hasha => '$_[0] uz existuje v $_[1]',
+ hashb => '$_[0] byl pridan do $_[1]',
+ hashc => '$_[0] byl odstranen z $_[1]',
+ hashd => '$_[0] neni v $_[1]',
+ hashe => '$_[0] byl nastaven v $_[1]',
+ helpe1 => 'Systemova napoveda neni k dispozici, informuj sysopa',
+ helpe2 => 'Napoveda neni k dispozici k $_[0]',
+ heres => '$_[0] je pritomen',
+ heade1 => 'S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra',
+ hereu => '$_[0] neni pritomen',
+ homebbs => 'Domaci BBS je nastavena na: $_[0]',
+ homenode => 'Domaci DXC nod je nastaven na: $_[0]',
+ hnodee1 => 'Prosim zadej svuj domaci DXC nod, set/homenode <tvuj domaci DX cluster>',
+ hnodee2 => 'Nastaveni domaciho nodu na $_[0] selhalo',
+ hnode => 'Tvuj domaci nod je nyni \"$_[0]\"',
+ init1 => 'vyslana inicializacni zprava do $_[0]',
+ iso => '$_[0] izolovan',
+ isou => '$_[0] neni izolovan',
+ isoc => '$_[0] vytvoren a izolovan',
+ isoari => 'vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]',
+ isoaro => 'vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]',
+ isow => '$_[0] je izolovan; zadej nejprve unset/isolate $_[0]',
+ l1 => 'Lituji $_[0], uz jsi zalogovan na jinem kanalu',
+ l2 => 'Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build',
+ lang => 'Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)',
+ lange1 => 'set/language <lang> kde <lang> je jedno z ($_[0])',
+ lange2 => 'selhalo nastaveni jazyka na $_[0]',
+ lh1 => '$main::data/hop_table.pl neexistuje',
+ loce1 => 'Prosim zadej svou polohu, set/location <sirka delka>',
+ loce2 => 'Nemohu rozpoznat \"$_[0]\" jako sirka/delka (napr 52 20 N 0 16 E)',
+ loce3 => '$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]',
+ loc => 'Tva poloha (sirka/delka) je nyni \"$_[0]\"',
+ lockout => '$_[0] zamknuto',
+ lockoutc => '$_[0] vytvoreno a zamknuto',
+ lockoutun => '$_[0] Odemceno',
+ lockoutuse => 'pouziti: sh/lockout <znacka>|ALL',
+ loginu => 'Uzivatel $_[0] prihlasen',
+ logoutu => 'Uzivatel $_[0] odhlasen',
+ loginn => 'Nod $_[0] prihlasen',
+ logoutn => 'Nod $_[0] odhlasen',
+ m1 => 'Zadej nazev (30 znaku):',
+ m2 => 'Kopie zpravy $_[0] byla odeslana k $_[1]',
+ m3 => 'Lituji, $_[0] je neplatna cilova adresa',
+ m4 => 'Lituji, zprava $_[0] neni dostupna',
+ m5 => 'Lituji, potrebuji cislo zpravy',
+ m6 => 'Odpoved na: $_[0]',
+ m7 => 'Nezev: $_[0]',
+ m8 => 'Zadej text zpravy /EX pro konec nebo /ABORT k preruseni',
+ m9 => 'Mas novou zpravu',
+ m10 => 'Zprava prerusena',
+ m11 => 'Zprava c. $_[0] ulozena a smerovana na $_[1]',
+ m12 => 'Zprava c. $_[0] byla smazana',
+ m13 => 'Zprava c. $_[0] chybi',
+ m14 => 'Zprava c. $_[0] byla oznacena a zaslana do $_[1]',
+ m15 => 'Zprava c. $_[0] byla neoznacena a zaslana do $_[1]',
+ m16 => 'Potrebuji cislo zpravy',
+ m17 => 'Lituji, nemohu posilat zpravy v modu $_[0]',
+ m18 => 'Lituji, zprava $_[0] ma momentalne status KEEP',
+ msg1 => 'Zpravy v rubrikach cekaji ve fronte',
+ msg2 => 'Privatni zpravy cekaji ve fronte',
+ msg3 => 'Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]',
+ msgu => 'pouziti: msg <prikaz> <cislo zpravu> data...',
+ merge1 => 'Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]',
+ moon => 'Poloha dd/mm/yyyy Vychod Zapad',
+ moon_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
+ mond => 'Monitoring je zakazan',
+ mone => 'Monitoring je povolen',
+ namee1 => 'Prosim zadej sve jmeno, set/name <tve jmeno>',
+ namee2 => 'Nemohu najit uzivatele $_[0]!',
+ name => 'Tve jmeno je nyni \"$_[0]\"',
+ nodea => '$_[0] nastaven jako nod typu AK1A',
+ nodeac => '$_[0] vytvoren jako nod typu AK1A',
+ nodeb => '$_[0] nastaven jako BBS',
+ nodebc => '$_[0] vytvoren jako BBS',
+ nodec => '$_[0] nastaven jako nod typu CLX',
+ nodecc => '$_[0] vytvoren jako nod typu CLX',
+ noder => '$_[0] nastaven jako nod typu AR-Cluster',
+ noderc => '$_[0] vytvoren jako nod typu AR-Cluster',
+ nodes => '$_[0] nastaven jako nod typu DXSpider',
+ nodesc => '$_[0] vytvoren jako nod typu DXSpider',
+ nodex => '$_[0] nastaven jako nod typu DXNET',
+ nodexc => '$_[0] vytvoren jako nod typu DXNET',
+ nodeu => '$_[0] nastaven opet jako uzivatel',
+ nodee1 => 'Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line',
+ notdone => 'NEBYLO provedeno',
+ nothere => 'Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji',
+ obscount => 'Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]',
+ ok => 'Operace byla uspesna',
+ outconn => 'Zbyvajici spojeni na $_[0]',
+ page => 'Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >',
+ pagelth => 'Delka stranky je nyni $_[0]',
+ passerr => 'Prosim pouzij: SET/PASS <heslo> <znacka>',
+ passphrase => 'Fraze byla nastavena nebo zmenena pro $_[0]',
+ passphraseu => 'Fraze byla odstranena pro $_[0]',
+ password => 'Heslo bylo nastaveno nebo zmeneno pro $_[0]',
+ passwordu => 'Heslo bylo odstraneno pro $_[0]',
+ pc90s => 'PC90 bylo povoleno pro $_[0]',
+ pc90u => 'PC90 bylo zakazano $_[0]',
+ pingo => 'Ping byl zaslan na $_[0]',
+ pingi => 'Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy',
+ pinge1 => 'Nemuzu pingnout sam sebe!',
+ pingint => 'Ping interval na $_[0] byl nastaven na $_[1] sekundy',
+ 'pos' => 'Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ prs => 'Prompt byl nastaven na \"$_[0]\"',
+ pru => 'Prompt byl vracen na default',
+ priv => 'Uroven prav byla zmenena na $_[0]',
+ prx => '$main::mycall >',
+ pw0 => 'Zadej stare heslo: ',
+ pw1 => 'Zadej nove heslo: ',
+ pw2 => 'Zadej znovu nove heslo: ',
+ pw3 => 'Heslo bylo zmeneno',
+ pw4 => 'Hesla se lisi, heslo NEBYLO zmeneno',
+ qll => 'Prpsim zadej svou polohu s pomoci set/location nebo set/qra',
+ qthe1 => 'Prosim zadej sve QTH, set/qth <tve QTH>',
+ qth => 'Tve QTH je nyni \"$_[0]\"',
+ qrae1 => 'Prosim zadej svuj QRA lokator, set/qra <qra lokator> (napr set/qra JN79FM)',
+ qrashe1 => 'Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV',
+ qrae2 => 'Nerozpoznal jsem \"$_[0]\" jako QRA lokator (napr JN79FM)',
+ qra => 'Tvuj QRA lokator je nyni \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" bylo zaslano do $_[1]',
+ read1 => 'Lituji, nemas zadne nove zpravy',
+ read2 => 'Zprava $_[0] nenalezena',
+ read3 => 'Msg $_[0] neni k dispozici',
+ rec => '$_[0] zaznamu',
+ reg => '$_[0] registrovano',
+ regc => '$_[0] vytvoreno a registrovano',
+ reginac => 'Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)',
+ regun => '$_[0] neregistrovano',
+ route => '$_[0] na $_[1] via $_[2]',
+ sat1 => 'Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Vzdal Km',
+ sat3 => 'Syntaxe: SH/SAT <jmeno> [<hodin> <interval>]',
+ sat4 => 'Druzice k dispozici/Stari Kepl. elem (dny):-',
+ sat5 => 'potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy',
+ satnf => 'Druzice $_[0] je neznama',
+ satdisc => '-----',
+ set => '$_[0] povoleno pro $_[1]',
+ sethop1 => 'pouziti: set/hops <znacka> ann|spots|wwv|wcy <pocet skoku>',
+ sethop2 => '$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]',
+ sethop3 => 'Zadny pocet skoku nastaven pro $_[0]',
+ shu => '\"SHU\" nestaci, je treba alespon \"SHUT\" k vypnuti nodu',
+ shutting => '$main::mycall se vypina...',
+ sloc => 'Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm',
+ snode1 => 'Nod Znacka Typ Verze ',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Neznama znacka',
+ sqra => 'Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm',
+ sorry => 'Lituji',
+ spf1 => 'spoof: vytvarim noveho uzivatele $_[0]',
+ stathf => 'HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
+ stathft => 'HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
+ statvhft => 'VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
+ statdx => 'Prehled DX Spotu pro $_[1] dni pocinaje $_[0]',
+ sun => 'Poloha dd/mm/yyyy Vychod Zapad',
+ sun_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
+ susdb1 => 'pouziti: znacka stat mesto',
+ susdb2 => 'USDB $_[0] bylo $_[1], $_[2]',
+ susdb3 => 'USDB $_[0] je nyni $_[1], $_[2]',
+ susdb4 => 'USDB $_[0] smazano',
+ suser1 => 'pouziti: znacka jmeno_uzivatele hodnota',
+ suser2 => 'User $_[0] nebylo nalezeno',
+ suser3 => 'User field \'$_[0]\' bylo \'$_[1]\' nyni nastaveno na \'$_[2]\'',
+ suser4 => 'Jmeno uzivatele \'$_[0]\' neexistuje',
+ time1 => 'Lokalni cas: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Talk povolen pro $_[0]',
+ talku => 'Talk zakazan pro $_[0]',
+ talkend => 'Skoncil spolecnou konverzaci',
+ talkinst => 'Vstupuji do konverzacniho modu, /EX pro skonceni, /<paikaz> ke spusteni prikazu',
+ talknh => 'Lituji, $_[0] neni momentalne online',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Zahajil spolecnou konverzaci',
+ unset => '$_[0] zakazano pro for $_[1]',
+ unsethop1 => 'pouziti: unset/hops <znacka> ann|spots|wwv|wcy',
+ unsethop2 => 'pocet skoku neni nastaven na $_[1] pro $_[0]',
+ usernf => '*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***',
+ wcy1 => '$_[0] bud chybi nebo je mimo rozsah',
+ wcy2 => 'Duplicitni WCY',
+ wcys => 'WCY je povoleno pro $_[0]',
+ wcyu => 'WCY je zakazano pro $_[0]',
+ wwv1 => '$_[0] bud chybi nebo je mimo rozsah',
+ wwv2 => 'Duplicitni WWV',
+ wwvs => 'WWV je povoleno pro $_[0]',
+ wwvu => 'WWV je zakazano pro $_[0]',
+ wxs => 'WX je povoleno pro $_[0]',
+ wxu => 'WX je zakazano pro $_[0]',
+ }
+
);
+