X-Git-Url: http://scm.dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;ds=inline;f=html%2Fadminmanual-3.html;h=20910151a8d074f17e39dfe3ef93927a7c8c370f;hb=ff03e18639d468fc7f5a9c958b16ab45406fb5d2;hp=42605ab71c415958d2efdde47554a9aa554a531c;hpb=4fa8a0251b64361c908d056393b46abece6d38be;p=spider.git diff --git a/html/adminmanual-3.html b/html/adminmanual-3.html index 42605ab7..20910151 100644 --- a/html/adminmanual-3.html +++ b/html/adminmanual-3.html @@ -2,297 +2,234 @@
-As stated previously, the aim of this document is not to tell you how to configure Linux or the ax25 utilities. However, you do need to add a line in your ax25d.conf to allow connections to DXSpider for your users. For each interface that you wish to allow connections on, use the following format ... +
Upto v1.44 it was not possible for the user to set their own filters. From +v1.45 though that has all changed. It is now possible to set filters for just +about anything you wish. If you have just updated from an older version of +DXSpider you will need to update your new filters. You do not need to do +anything with your old filters, they will be renamed as you update.
-
-
-default * * * * * * - sysop /spider/src/client client %u ax25
-
-
+There are 3 basic commands involved in setting and manipulating filters. These +are accept, reject and clear. First we will look +generally at filtering. There are a number of things you can filter in the +DXSpider system. They all use the same general mechanism.
-
Allowing telnet connections is quite simple. Firstly you need to add a line in /etc/services to allow connections to a port number, like this .... +
In general terms you can create a 'reject' or an 'accept' filter which can have +up to 10 lines in it. You do this using, for example ...
-spdlogin 8000/tcp # spider anonymous login port
+
+accept/spots .....
+reject/spots .....
-Then add a line in /etc/inetd.conf like this .... +
where ..... are the specific commands for that type of filter. There are filters +for spots, wwv, announce, wcy and (for sysops) connects. See each different +accept or reject command reference for more details. +
There is also a command to clear out one or more lines in a filter. They are ...
-spdlogin stream tcp nowait root /usr/sbin/tcpd /spider/src/client login telnet
+clear/spots 1
+clear/spots all
+There is clear/xxxx command for each type of filter.
-
This needs to be added above the standard services such as ftp, telnet etc. Once this is done, you need to restart inetd like this .... +
and you can check that your filters have worked by the command ...
-killall -HUP inetd
+
+show/filter
+
For now we are going to use spots for the examples, but you can apply the same +principles to all types of filter.
-
Now login as sysop and cd spider/perl. You can test that spider is accepting telnet logins by issuing the following command .... -
-
-
-client.pl login telnet
-
-
-You should get a login prompt and on issuing a callsign, you will be given access to the cluster. Note, you will not get a password login. There seems no good reason for a password prompt to be given so it is not asked for. -
-
Assuming all is well, then try a telnet from your linux console .... -
-
-
-telnet localhost 8000
-
-
--
You should now get the login prompt and be able to login as before. -
-
In order to allow cluster node connections, spider needs to know that the connecting callsign is a cluster node. This is the case whether the connect is incoming or outgoing. -In spider this is a simple task and can be done in runtime. +
There are two main types of filter, accept or reject. You +can use either to achieve the result you want dependent on your own preference +and which is more simple to do. It is pointless writing 8 lines of reject +filters when 1 accept filter would do the same thing! Each filter has 10 +lines (of any length) which are tried in order. If a line matches then the +action you have specified is taken (ie reject means ignore it and accept +means take it)
-
Start up the cluster as you did before and login as the sysop with client.pl. -The cluster node I am wanting to make a connection to is GB7BAA but you would obviously use whatever callsign you required. -At the prompt type ... +
If you specify reject filters, then any lines that arrive that match the filter +will be dumped but all else will be accepted. If you use an accept filter, +then ONLY the lines in the filter will be accepted and all else will be dumped. +For example if you have a single line accept filter ...
-set/node gb7baa
+accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+then you will ONLY get VHF spots from or to CQ zones +14, 15 and 16.
-
The case does not matter as long as you have a version of DXSpider later than 1.33. Earlier versions required the callsign to be in upper case. -
-
That is now set, it is as simple as that. To prove it, login on yet another console as sysop and issue the command ... +
If you set a reject filter like this ...
-client.pl gb7baa (using the callsign you set as a node)
+reject/spots on hf/cw
--
You should get an initialisation string from DXSpider like this ... +
Then you will get everything EXCEPT HF CW spots. You could make this +single filter even more flexible. For example, if you are interested in IOTA +and will work it even on CW even though normally you are not interested in +CW, then you could say ...
-client.pl gb7baa
-PC38^GB7MBC^~
+reject/spots on hf/cw and not info iota
-If the callsign you just set up as a cluster node is for an incoming connect, this is all that needs to be done. If the connection is to be outgoing then a connection script needs to be written. -
-
Because DXSpider operates under Linux, connections can be made using just about any protocol; AX25, NETRom, tcp/ip, ROSE etc are all possible examples. Connect scripts live in the /spider/connect directory and are simple ascii files. Writing a script for connections is therefore relatively simple. -
-
The connect scripts consist of lines which start with the following keywords or symbols:- -
-
-
- -# All lines starting with a # are ignored, as are wholly blank lines. - -timeout timeout followed by a number is the number of seconds to wait for a - command to complete. If there is no timeout specified in the script - then the default is 60 seconds. - -abort abort is a regular expression containing one or more strings to look - for to abort a connection. This is a perl regular expression and is - executed ignoring case. - -connect connect followed by ax25 or telnet and some type dependent - information. In the case of a telnet connection, there can be up to - two parameters. - The first is the ip address or hostname of the computer you wish to - connect to and the second is the port number you want to use (this - can be left out if it is a normal telnet session). - In the case of an ax25 session then this would normally be a call to - ax25_call or netrom_call as in the example above. It is your - responsibility to get your node and other ax25 parameters to work - before going down this route! - -' ' is the delimiting character for a word or phrase of an expect/send - line in a chat type script. The words/phrases normally come in pairs, - either can be empty. Each line reads input from the connection until - it sees the string (or perl regular expression) contained in the - left hand string. If the left hand string is empty then it doesn't - read or wait for anything. The comparison is done ignoring case. - When the left hand string has found what it is looking for (if it is) - then the right hand string is sent to the connection. - This process is repeated for every line of chat script. - -client client starts the connection, put the arguments you would want here - if you were starting the client program manually. You only need this - if the script has a different name to the callsign you are trying to - connect to (i.e. you have a script called other which actually - connects to GB7DJK-1 [instead of a script called gb7djk-1]). --
-
There are many possible ways to configure the script but here are two examples, one for a NETRom/AX25 connect and one for tcp/ip. +
But in that case you might only be interested in iota and say:-
- timeout 60
- abort (Busy|Sorry|Fail)
- # don't forget to chmod 4775 netrom_call!
- connect ax25 /usr/sbin/netrom_call bbs gb7djk g1tlh
- 'Connect' ''
- 'Connect' 'c np7'
- 'Connect' 'c gb7dxm'
- # you can leave this out if you call the script 'gb7dxm'
- client gb7dxm ax25
+accept/spots not on hf/cw or info iota
+which achieves exactly the same thing. You should choose one or the other +until you are comfortable with the way it works. You can mix them if you +wish (actually you can have an accept AND a reject on the same line) but +don't attempt this until you are sure you know what you are doing!
-
+
You can arrange your filter lines into logical units, either for your own +understanding or simply convenience. Here is an example ...
- timeout 15
- connect telnet dirkl.tobit.co.uk
- 'login' 'gb7djk'
- 'word' 'gb7djk'
- # tell GB7DJK-1 that it is connected to GB7DJK
- # you can leave this out if you call this script 'gb7djk'
- client gb7djk telnet
+reject/spots 1 on hf/cw
+reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+What this does is to ignore all HF CW spots and also rejects any spots on VHF +which don't either originate or spot someone in Europe.
-
Both these examples assume that everything is set up properly at the other end. You will find other examples in the /spider/examples directory. +
This is an example where you would use a line number (1 and 2 in this case), if +you leave the digit out, the system assumes '1'. Digits '0'-'9' are available. +This make it easier to see just what filters you have set. It also makes it +more simple to remove individual filters, during a contest for example.
-
You start the connection, from within a sysop enabled cluster login, by typing in the word connect followed by a script name like this .... +
You will notice in the above example that the second line has brackets. Look +at the line logically. You can see there are 2 separate sections to it. We +are saying reject spots that are VHF or above APART from those in +zones 14, 15 and 16 (either spotted there or originated there). If you did +not have the brackets to separate the 2 sections, then Spider would read it +logically from the front and see a different expression entirely ...
-G0VGS de GB7MBC 13-Dec-1998 2041Z >connect gb7djk-1
-connection to GB7DJK-1 started
-G0VGS de GB7MBC 13-Dec-1998 2043Z >
+(on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
-This will start a connection using the script called gb7djk-1. You can follow the connection by watching the term or console from where you started cluster.pl. You should see something like this ... +
The simple way to remember this is, if you use OR - use brackets. Whilst we are +here CASE is not important. 'And BY_Zone' is just the same as 'and by_zone'. +
As mentioned earlier, setting several filters can be more flexible than +simply setting one complex one. Doing it in this way means that if you want +to alter your filter you can just redefine or remove one or more lines of it or +one line. For example ...
-<- D G1TLH connect gb7djk-1
--> D G1TLH connection to GB7DJK-1 started
--> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
-timeout set to 15
-CONNECT sort: telnet command: dirkl.tobit.co.uk
-CHAT "login" -> "gb7djk"
-received "
-Red Hat Linux release 5.1 (Manhattan)
-Kernel 2.0.35 on an i586
-"
-received "login: "
-sent "gb7djk"
-CHAT "word" -> "gb7djk"
-received "gb7djk"
-received "Password: "
-sent "gb7djk"
-Connected to GB7DJK-1, starting normal protocol
-<- O GB7DJK-1 telnet
--> B GB7DJK-1 0
-GB7DJK-1 channel func state 0 -> init
-<- D GB7DJK-1
-<- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
-<- D GB7DJK-1 PC38^GB7DJK-1^~
-<- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime 0 00:00^5447^~
- etc
+reject/spots 1 on hf/ssb
--
With later versions of Spider there is a set/login command for users. This tells them when a user or node logs in or out. If you do not add a line to your scripts after the final line (or before the client line which should always be last if needed) then the login/logout information will be sent to users before the login actually completes. This means if a node is unreachable, it will continue sending logins and logouts to users even though it is not actually connecting. To avoid this use the following line ... +
would redefine our earlier example, or
-'connect' ''
+clear/spots 1
--
In a script, this might look like ... +
To remove all the filter lines in the spot filter ...
-timeout 35
-abort (Busy|Sorry|Fail)
-connect telnet mary 3000
-'ogin:' 'gb7mbc'
-'>' 'telnet 44.131.93.96 7305'
-'connect' ''
+clear/spots all
-
Ok, you should now have DXSpider running nicely and allowing connects by cluster nodes or users. However, it has to be shutdown and restarted manually and if connection scripts fail they have to be started again manually too, not much use if you are not at the console! -So, in this section we will automate both. Firstly starting the cluster. +
You can filter in several different ways. The options are listed in the +various helpfiles for accept, reject and filter.
-
This is not only a way to start the cluster automatically, it also works as a watchdog, checking the sanity of DXSpider and respawning it should it crash for any reason. -Before doing the following, shutdown the cluster as you did earlier. -
-
Login as root and bring up the /etc/inittab file in your favourite editor. Add the following lines to the file near the end ... +
Sometimes all that is needed is a general rule for node connects. This can +be done with a node_default filter. This rule will always be followed, even +if the link is isolated, unless another filter is set specifically. Default +rules can be set for nodes and users. They can be set for spots, announces, +WWV and WCY. They can also be used for hops. An example might look like +this ...
-##Start DXSpider on bootup and respawn it should it crash
-DX:3:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
+accept/spot node_default by_zone 14,15,16,20,33
+set/hops node_default spot 50
+This filter is for spots only, you could set others for announce, WWV and WCY. +This filter would work for ALL nodes unless a specific filter is written to +override it for a particular node. You can also set a user_default should +you require. It is important to note that default filters should be +considered to be "connected". By this I mean that should you override the +default filter for spots, you need to add a rule for the hops for spots also.
-
This will automatically start DXSpider on tty7 (ALT-F7) on bootup and restart it should it crash for any reason. -
-
As root type the command telinit q. DXSpider should start up immediately. You will see the output on tty7 and if you login as sysop you should find everything running nicely. -
-
So far so good, now to automate script connections... -
-
Login as sysop and create a file in /spider/local_cmd called crontab. Edit it with your favourite editor and add a line like this (I have included a comment) +
Once you are happy with the results you get, you may like to experiment. +
+
The previous example that filters hf/cw spots and accepts vhf/uhf spots from EU +can be written with a mixed filter, for example ...
-# check every 10 minutes to see if gb7xxx is connected and if not
-# start a connect job going
-
-0,10,20,30,40,50 * * * * start_connect('gb7xxx') if !connected('gb7xxx')
+rej/spot on hf/cw
+acc/spot on 0/30000
+acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
+Note that the first filter has not been specified with a number. This will +automatically be assumed to be number 1. In this case, we have said reject all +HF spots in the CW section of the bands but accept all others at HF. Also +accept anything in VHF and above spotted in or by operators in the zones +14, 15 and 16. Each filter slot actually has a 'reject' slot and +an 'accept' slot. The reject slot is executed BEFORE the accept slot.
-
The callsign involved will be the callsign of the cluster node you are going to connect to. This will now check every 10 minutes to see if gb7xxx is connected, if it is then nothing will be done. If it is not, then a connect attempt will be started. +
It was mentioned earlier that after a reject test that doesn't match, the default +for following tests is 'accept', the reverse is true for 'accept'. In the example +what happens is that the reject is executed first, any non hf/cw spot is passed +to the accept line, which lets through everything else on HF. The next filter line +lets through just VHF/UHF spots from EU.
-
There are probably lots of other things you could use this crontab file for. If you want to know more about it, look at the -DXSpider website at the cron page where it is explained more fully.