X-Git-Url: http://scm.dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;ds=inline;f=html%2Fadminmanual-3.html;h=83fe1c0c699ea315d627fdb4ca6370c1a2939599;hb=5e7031a532b4df6beb475aa3e7e3f6eec29360a6;hp=29935731ccf78c89bcb74fbf32e923170e2d8e3d;hpb=e1f91307fae936112a25ed7ce08f47214ecec766;p=spider.git diff --git a/html/adminmanual-3.html b/html/adminmanual-3.html index 29935731..83fe1c0c 100644 --- a/html/adminmanual-3.html +++ b/html/adminmanual-3.html @@ -6,6 +6,7 @@ +
Next @@ -17,21 +18,29 @@As stated previously, the aim of this document is not to tell you how to configure Linux or the ax25 utilities. However, -you do need to add a line in your ax25d.conf to allow connections to DXSpider for your users. For each interface that -you wish to allow connections on, use the following format ... +
As stated previously, the aim of this document is not to tell you how to +configure Linux or the ax25 utilities. However, you do need to add a line +in your ax25d.conf to allow connections to DXSpider for your users. For +each interface that you wish to allow connections on, use the following format ...
default * * * * * * - sysop /spider/src/client client %u ax25
+or, if you wish your users to be able to use SSID's on their callsigns .. +
+
+
+default * * * * * * - sysop /spider/src/client client %s ax25
+
+
Allowing telnet connections is quite simple. Firstly you need to add a line in /etc/services to allow connections to a -port number, like this .... +
Allowing telnet connections is quite simple. Firstly you need to add a line +in /etc/services to allow connections to a port number, like this ....
@@ -46,8 +55,8 @@ spdlogin stream tcp nowait root /usr/sbin/tcpd /spider/src/client login telnet
-
This needs to be added above the standard services such as ftp, telnet etc. Once this is done, you need to restart inetd -like this .... +
This needs to be added above the standard services such as ftp, telnet etc. +Once this is done, you need to restart inetd like this ....
@@ -56,16 +65,17 @@ killall -HUP inetd
-
Now login as sysop and cd spider/perl. You can test that spider is accepting telnet logins by issuing the -following command .... +
Now login as sysop and cd spider/src. You can test that spider +is accepting telnet logins by issuing the following command ....
-client.pl login telnet
+./client login telnet
-You should get a login prompt and on issuing a callsign, you will be given access to the cluster. Note, you will not -get a password login. There seems no good reason for a password prompt to be given so it is not asked for. +
You should get a login prompt and on issuing a callsign, you will be given +access to the cluster. Note, you will not get a password login. There seems +no good reason for a password prompt to be given so it is not asked for.
Assuming all is well, then try a telnet from your linux console ....
@@ -80,14 +90,32 @@ telnet localhost 8000
In order to allow cluster node connections, spider needs to know that the connecting callsign is a cluster node. This -is the case whether the connect is incoming or outgoing. -In spider this is a simple task and can be done in runtime. +
In order to allow cluster node connections, spider needs to know that the +connecting callsign is a cluster node. This is the case whether the connect +is incoming or outgoing. In spider this is a simple task and can be done in +runtime. +
+
Later versions of Spider can distinguish different software and treat them +differently. For example, the WCY beacon cannot be handles by AK1A type +nodes as AK1A does not know what to do with PC73. There are 4 different +types of node at present and although they may not have any major +differences at the moment, it allows for compatibility. The 4 types are ... +
+
+
+set/node (AK1A type)
+set/spider
+set/dxnet
+set/clx
+
+
++
For now, we will assume that the cluster we are going to connect to is an +AK1A type node.
-
Start up the cluster as you did before and login as the sysop with client.pl. -The cluster node I am wanting to make a connection to is GB7BAA but you would obviously use whatever callsign you -required. -At the prompt type ... +
Start up the cluster as you did before and login as the sysop with client. +The cluster node I am wanting to make a connection to is GB7BAA but you would +obviously use whatever callsign you required. At the prompt type ...
@@ -95,14 +123,15 @@ set/node gb7baa
-
The case does not matter as long as you have a version of DXSpider later than 1.33. Earlier versions required the -callsign to be in upper case. +
The case does not matter as long as you have a version of DXSpider later than +1.33. Earlier versions required the callsign to be in upper case.
-
That is now set, it is as simple as that. To prove it, login on yet another console as sysop and issue the command ... +
That is now set, it is as simple as that. To prove it, login on yet another +console as sysop, cd to spider/src and issue the command ...
-client.pl gb7baa (using the callsign you set as a node)
+./client gb7baa (using the callsign you set as a node)
@@ -110,26 +139,29 @@ client.pl gb7baa (using the callsign you set as a node)
-client.pl gb7baa
+./client gb7baa
PC38^GB7MBC^~
-If the callsign you just set up as a cluster node is for an incoming connect, this is all that needs to be done. -If the connection is to be outgoing then a connection script needs to be written. +
If the callsign you just set up as a cluster node is for an incoming connect, +this is all that needs to be done. If the connection is to be outgoing then +a connection script needs to be written.
Because DXSpider operates under Linux, connections can be made using just about any protocol; AX25, NETRom, tcp/ip, -ROSE etc are all possible examples. Connect scripts live in the /spider/connect directory and are simple ascii files. +
Because DXSpider operates under Linux, connections can be made using just about +any protocol; AX25, NETRom, tcp/ip, ROSE etc are all possible examples. +Connect scripts live in the /spider/connect directory and are simple ascii files. Writing a script for connections is therefore relatively simple.
-
The connect scripts consist of lines which start with the following keywords or symbols:- -
+
The connect scripts consist of lines which start with the following keywords +or symbols:-
-# All lines starting with a # are ignored, as are completely blank lines. +# All lines starting with a # are ignored, as are completely + blank lines. timeout timeout followed by a number is the number of seconds to wait for a command to complete. If there is no timeout specified in the script @@ -151,12 +183,12 @@ connect connect followed by ax25 or telnet and some type dependent before going down this route! ' ' is the delimiting character for a word or phrase of an expect/send - line in a chat type script. The words/phrases normally come in pairs, + line in a chat type script. The words/phrases normally come in pairs, either can be empty. Each line reads input from the connection until it sees the string (or perl regular expression) contained in the left hand string. If the left hand string is empty then it doesn't read or wait for anything. The comparison is done ignoring case. - When the left hand string has found what it is looking for (if it is) + When the left hand string has found what it is looking for (if it is) then the right hand string is sent to the connection. This process is repeated for every line of chat script. @@ -167,8 +199,8 @@ client client starts the connection, put the arguments you would want h connects to GB7DJK-1 [instead of a script called gb7djk-1]).
-
There are many possible ways to configure the script but here are two examples, one for a NETRom/AX25 connect and -one for tcp/ip. +
There are many possible ways to configure the script but here are two examples, +one for a NETRom/AX25 connect and one for tcp/ip.
@@ -198,14 +230,14 @@ client gb7djk telnet
-
Both these examples assume that everything is set up properly at the other end. You will find other examples in -the /spider/examples directory. +
Both these examples assume that everything is set up properly at the other end. +You will find other examples in the /spider/examples directory.
You start the connection, from within a sysop enabled cluster login, by typing in the word connect followed -by a script name like this .... +
You start the connection, from within a sysop enabled cluster login, by typing +in the word connect followed by a script name like this ....
@@ -214,8 +246,9 @@ connection to GB7DJK-1 started
G0VGS de GB7MBC 13-Dec-1998 2043Z >
-This will start a connection using the script called gb7djk-1. You can follow the connection by watching the -term or console from where you started cluster.pl. You should see something like this ... +
This will start a connection using the script called gb7djk-1. You can +follow the connection by watching the term or console from where you started +cluster.pl. You should see something like this ...
@@ -242,15 +275,18 @@ GB7DJK-1 channel func state 0 -> init
<- D GB7DJK-1
<- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
<- D GB7DJK-1 PC38^GB7DJK-1^~
-<- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime 0 00:00^5447^~
+<- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime
+0 00:00^5447^~
etc
-
With later versions of Spider there is a set/login command for users. This tells them when a user or node logs in -or out. If you do not add a line to your scripts after the final line (or before the client line which should always -be last if needed) then the login/logout information will be sent to users before the login actually -completes. This means if a node is unreachable, it will continue sending logins and logouts to users even though it +
With later versions of Spider there is a set/login command for users. This +tells them when a user or node logs in or out. If you do not add a line to +your scripts after the final line (or before the client line which should always +be last if needed) then the login/logout information will be sent to users +before the login actually completes. This means if a node is +unreachable, it will continue sending logins and logouts to users even though it is not actually connecting. To avoid this use the following line ...
@@ -275,20 +311,21 @@ connect telnet mary 3000
3.6 Telnet echo
-Cluster links in particular suffer greatly from the presence of telnet echo. This is caused
-by the telnet negotiation itself and can create at worst severe loops. At best it creates
-unnecessary bandwidth and large logfiles! There are things that can be done to limit this
-problem but will not always work dependent on the route taken to connect.
-
-
Telnet echo itself should only be a problem if the connection is being made to the telnet
-port (23). This port uses special rules that include echo negotiation. If the connection
-is to a different port, such as 8000, this negotiation does not happen and therefore no
-echo should be present.
-
-
Sometimes it is not possible to make a direct connection to another node and this can
-cause problems. There is a way of trying to suppress the telnet echo but this will not
-always work, unfortunately it is difficult to be more specific. Here is an example
-of what I mean ...
+
Cluster links in particular suffer greatly from the presence of telnet echo.
+This is caused by the telnet negotiation itself and can create at worst severe
+loops. At best it creates unnecessary bandwidth and large logfiles! There are
+things that can be done to limit this problem but will not always work dependent
+on the route taken to connect.
+
+
Telnet echo itself should only be a problem if the connection is being made to
+the telnet port (23). This port uses special rules that include echo negotiation.
+If the connection is to a different port, such as 8000, this negotiation does
+not happen and therefore no echo should be present.
+
+
Sometimes it is not possible to make a direct connection to another node and this
+can cause problems. There is a way of trying to suppress the telnet echo but
+this will not always work, unfortunately it is difficult to be more specific.
+Here is an example of what I mean ...
@@ -302,67 +339,15 @@ connect telnet mary.lancs.ac.uk
'connect' ''
-So, the first connection is made by Spider. This is fine as Spider uses the Net_Telnet
-script from within perl. This actually uses TCP rather than TELNET so no negotiation
-will be done on the first connection. Once connected to mary.lancs.ac.uk, the command
-is sent to suppress echo. Now a telnet is made to a cluster node that is accepting
-connections on port 23. The problem with this link is that the negotiation is made by
-the remote machine, therefore you have no control over it. The chances are that this
-link will create echo and there will be no way you can stop it.
-
-
-
3.7 Automating things
-
-
-Ok, you should now have DXSpider running nicely and allowing connects by cluster nodes or users. However, it has
-to be shutdown and restarted manually and if connection scripts fail they have to be started again manually too, not
-much use if you are not at the console! So, in this section we will automate both. Firstly starting the cluster.
-
-
Autostarting the cluster
-
-This is not only a way to start the cluster automatically, it also works as a watchdog, checking the sanity of
-DXSpider and respawning it should it crash for any reason.
-Before doing the following, shutdown the cluster as you did earlier.
-
-
Login as root and bring up the /etc/inittab file in your favourite editor. Add the following lines to the file near
-the end ...
-
-
-
-##Start DXSpider on bootup and respawn it should it crash
-DX:3:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
-
-
-
-
This will automatically start DXSpider on tty7 (ALT-F7) on bootup and restart it should it crash for any reason.
-
-
As root type the command telinit q. DXSpider should start up immediately. You will see the output on tty7
-and if you login as sysop you should find everything running nicely.
-
-
So far so good, now to automate script connections...
-
-
The crontab file
-
-Login as sysop and create a file in /spider/local_cmd called crontab. Edit it with your favourite editor and
-add a line like this (I have included a comment)
-
-
-
-# check every 10 minutes to see if gb7xxx is connected and if not
-# start a connect job going
-
-0,10,20,30,40,50 * * * * start_connect('gb7xxx') if !connected('gb7xxx')
-
-
-
-
The callsign involved will be the callsign of the cluster node you are going to connect to. This will now check
-every 10 minutes to see if gb7xxx is connected, if it is then nothing will be done. If it is not, then a connect
-attempt will be started.
+
So, the first connection is made by Spider. This is fine as Spider uses the
+Net_Telnet script from within perl. This actually uses TCP rather than TELNET
+so no negotiation will be done on the first connection. Once connected to
+mary.lancs.ac.uk, the command is sent to suppress echo. Now a telnet is made
+to a cluster node that is accepting connections on port 23. The problem with
+this link is that the negotiation is made by the remote machine, therefore you
+have no control over it. The chances are that this link will create echo and
+there will be no way you can stop it.
-
There are probably lots of other things you could use this crontab file for. If you want to know more about it, look
-at the
-DXSpider website at the cron page where it is
-explained more fully.
Next